Can You Use Tilex on Grout?

CleaningUpdated 16 min readHow we research

On this page
  1. What Tilex is, and what bleach does to grout
  2. What the Tilex label says about grout
  3. 5 minutes or 10? Why the advice differs
  4. The Tilex lineup: which ones contain bleach
  5. How strong is Tilex next to the grout?
  6. Can you use Tilex on colored grout?
  7. A worked case: one shower, two grout colors
  8. Grout by grout: where the makers draw the lines
  9. Tilex or not: grout by grout
  10. How to use Tilex on grout
  11. Tilex, Lysol or plain bleach?
  12. Where this answer stops applying
  13. Frequently asked questions
  14. Sources and standards

Yes, on white or light cement grout: Tilex Mold & Mildew Remover is one of the few bleach sprays whose EPA label names grout. To lift mildew stains, the label says spray, wait until the stains disappear, and rinse, and to kill mold and mildew on "hard, porous surfaces such as grout and cement," it says let it stand 10 minutes, then rinse. Clorox gives no warning about colored grout, but that does not make it safe on color. A grout maker bans bleach as a routine cleaner, and a sealer maker bans it on sealed grout. So on colored grout, test a hidden joint first, or use oxygen bleach instead.

Key takeaways

  • Tilex Mold & Mildew Remover is chlorine bleach in a spray: the US label lists sodium hypochlorite at 2.4 percent, and Clorox's safety data sheet gives pH 12.4 to 12.8.
  • The label has named grout since 1996, and the current version (June 2024) says to let it stand 10 minutes on grout and cement to kill mold and mildew, then rinse. The 5-minute time on the label is for glazed tile.
  • The label's germ-killing claims, like bacteria and viruses, are for hard, nonporous surfaces only. On grout, the claim is mold and mildew.
  • Clorox lists grout with no color warning, and no grout maker publishes a fade test either. TEC says not to use bleach on its grout as a routine, and Aqua Mix says no bleach on sealed grout. On colored grout, test first and rinse well.
  • Tilex Soap Scum Remover and Tilex Fresh Shower contain no bleach. Their sheets call them a bathroom cleaner and a shower spray, not mildew stain removers. Never use the soap scum spray right after the bleach one: its sheet warns of formaldehyde gas.

What Tilex is, and what bleach does to grout

Tilex is a line of bathroom cleaners made by Clorox. When people ask about Tilex on grout, they nearly always mean the white spray bottle: Tilex Mold & Mildew Remover. Clorox now sells it as Clorox Plus Tilex Mold & Mildew Remover, and that is the main product this page rules on.

Its one active ingredient is sodium hypochlorite, the chemical in chlorine bleach. Bleach is an oxidizer: it breaks down the colored parts of mildew, so the dark spots turn white or vanish. Clorox's own page puts it this way: "the bleach ... decolorizes mildew and kills it." The spray also has a soap-like part, a surfactant, that helps lift soap film.

Tilex is also strongly alkaline. On the pH scale, 7 is neutral, below 7 is acid, like vinegar, and above 7 is alkaline, like ammonia or lye. Each whole step is ten times stronger than the one before, and Tilex sits at 12.4 to 12.8.

Two more terms decide the answer. Cement grout is the common sanded or unsanded grout mixed with water. It is porous, with tiny holes that soak up water and whatever is in it, while glazed tile is nonporous, so liquid sits on top. EPA treats the two differently, and so does the Tilex label. Colored grout here means cement grout with pigment mixed in, from tan to charcoal. The general case for chlorine bleach on grout, including the salt it leaves behind, is on the bleach on grout page, so this one sticks to Tilex.

What the Tilex label says about grout

Tilex is sold as a pesticide, because it claims to kill mold, so its label is filed with the US Environmental Protection Agency under registration number 5813-24. EPA posts each approved version, and four of them show how the grout wording grew.

  • 1996. "Works on tile, grout, tubs, fiberglass..." But the kill directions were only "ON HARD NON-POROUS SURFACES: Spray surface such as tile until thoroughly wet, let stand five minutes and rinse."
  • December 2002. The directions were widened to "hard porous surfaces such as grout and cement: Spray surface until thoroughly wet, let stand 5 minutes and rinse."
  • April 2003. The two were split apart, and glazed tile kept 5 minutes with a full disinfecting claim. Grout got its own line: "TO KILL MOLD & MILDEW ON HARD, POROUS SURFACES such as grout and cement: Spray surface until thoroughly wet, let stand 10 minutes, and rinse." In the same letter, EPA refused a "Mildew Root Detector" claim, saying Clorox had not shown the product "actually detects mildews roots."
  • June 2024. The newest version keeps the same 10-minute grout line, and its surface table now names "Sealed Grout."

So the label gives grout two separate jobs. To remove mildew stains: "Spray, wait until stains disappear and rinse." To kill mold and mildew in the grout: 10 minutes, then rinse. The bacteria and virus claims, including the 1-minute SARS-CoV-2 time, are for "hard, nonporous surfaces" only, so they do not cover grout.

The label also lists what Tilex harms. "Avoid prolonged contact with metal and old porcelain as this product can react with these materials and leave a 'rusty' stain." "Avoid contact with aluminum, clothes, fabric, carpet or paper surfaces as they will discolor." Do not use it on wood or painted surfaces, and "Rinse immediately after use on rubber, plastic and vinyl." For floors, it says to mop with 1 cup per gallon of warm water and rinse.

And it admits a limit: "This product may not be able to remove mildew embedded in hard water deposits, old grout or silicone caulking." Clorox's product page goes further: if mildew has grown behind caulk, "it is hard to penetrate with a cleaner."

5 minutes or 10? Why the advice differs

Many pages say Tilex needs 5 minutes on grout, a time that came from the December 2002 label, and it lasted four months. Every version since April 2003 says 10 minutes for grout and cement, and keeps 5 minutes for glazed tile.

There is a second mix-up. "Wait until stains disappear" is not a time limit but how long to wait to see clean grout, and on white grout that can be quick. Waiting the full 10 minutes matters if you want to kill the mold, not just bleach its color. Either way, the label ends with "rinse."

The Tilex lineup: which ones contain bleach

Tilex is a brand on more than one chemistry. A safety data sheet (SDS) is the maker's legal record of what is in a product: Section 3 lists the hazardous ingredients and Section 9 gives the pH. Here is what each sheet found says.

Tilex products on Clorox's own sheets and EPA labels
Product (sheet, date)Listed ingredientspHBleach?
Tilex Mold & Mildew Remover, US label EPA 5813-24 (June 4, 2024)Sodium hypochlorite 2.4%Not on labelYes
Tilex Mold & Mildew Remover, Canada SDS rev. 2 (August 27, 2021)Sodium hypochlorite 1-5%, sodium hydroxide 0.1-1%12.4-12.8Yes
CloroxPro Tilex Disinfects Instant Mildew Remover, SDS US001357 (July 26, 2021)Sodium hypochlorite 1-5%; EPA 5813-24-6761912.4-12.8Yes: the pro version, sold under the same registration
Clorox Pro Tilex Soap Scum Remover & Disinfectant, SDS rev. 1 (June 25, 2021), EPA 5813-40-67619Diethylene glycol monobutyl ether 1-5%, EDTA 1-5%, two quats 0.1-0.2% each11-12.5No
Tilex Fresh Shower Daily Shower Cleaner, Canada SDS rev. 2 (August 27, 2021)EDTA 0.1-1%10.5-13No

In plain words, the soap scum remover uses a glycol ether, a solvent that loosens greasy film, along with EDTA, which grabs the calcium in hard water, and quats, the germ-killing salts used in disinfecting wipes. None of them is a bleach, and the daily shower spray is mostly water with a little EDTA.

The two families must never meet, and the Tilex label says "Do not mix with Tilex Soap Scum Remover." The soap scum sheet says why: "Do not use or mix with bleach-containing products. To do so may release small amounts of formaldehyde gas." The bleach spray's own warning adds "products containing ammonia, toilet bowl cleaners, rust removers, vinegar, or acids." So rinse the grout with clean water between any two cleaners.

How strong is Tilex next to the grout?

Cement grout is alkaline itself: MAPEI's sheet for Keracolor S sanded grout (version 10, March 26, 2026) gives pH 11.00 and says, "Cement gives a strong alkaline reaction with water." Tilex at 12.4 to 12.8 is 1.4 to 1.8 steps higher, or about 25 to 63 times as alkaline.

That gap is why Tilex does not eat cement the way acid does, because acid dissolves the cement in a joint, and an alkali does not. The risk from Tilex is to what sits on the cement: color, sealer and colorant. The grout cleaner pH chart places Tilex beside every other common cleaner.

Can you use Tilex on colored grout?

Two answers circulate, and both sound sure. Clorox's product page says Tilex "is safe for use on most bathroom surfaces including grout." Its labels list grout with no color rule. A flooring blog, dgfloors.com (May 31, 2026), says the opposite: keep it off "colored grout (will fade unevenly)," though it cites no test and no maker.

Neither side has a fade test behind it, since no Clorox label, SDS or page mentions grout color at all. The grout data sheets checked for this page are silent too: Custom Building Products' Polyblend, Polyblend Plus and Prism sheets, MAPEI's Ultracolor Plus FA and LATICRETE's PERMACOLOR Select. None warns against bleach.

What the makers do say points one way.

  • A grout maker. TEC's Power Grout care bulletin (November 2025) says: "Do not use vinegar, bleach, ammonia or other general purpose cleaning products ... Using these routinely can degrade the grout." That rule is for every color, and the key word is "routinely."
  • A sealer maker. Aqua Mix Sealer's Choice Gold (TDS-158, March 23, 2023): "Do not use cleaners containing ammonia, acids or bleach."
  • A colorant maker. Aqua Mix Grout Colorant (TDS-173, February 28, 2023) says "high-alkaline, acidic or solvent-based cleaners will affect wear." Tilex is a high-alkaline cleaner.
  • Two cleaner makers. Simple Green's grout page says "chlorine bleach will leach color out of tinted grout." Lysol's grout page says bleach "can result in a reduction in its longevity," even though Lysol sells a bleach spray for grout.
  • The Tilex label itself. It warns that clothes, fabric, carpet and paper "will discolor," and it says nothing about grout color either way.

So here is the ruling. Clorox's "safe on grout" is about the cement, and on that it is right, but it is not a promise about color. On colored grout, Tilex is a spot tool for mildew you cannot shift any other way. Test it first on a hidden joint, use the label's time, apply it evenly, and rinse. For routine stain work on color, start with oxygen bleach instead. OxiClean on grout and peroxide and baking soda cover how. If color has already gone patchy, fading grout covers the causes and fixes.

A worked case: one shower, two grout colors

Take a common shower. The walls are white glazed tile with white cement grout, and the floor is gray porcelain mosaic with charcoal cement grout. Neither grout has been sealed, and black mildew spots sit along the bottom wall joints and in the floor corners. There is a chrome drain and an aluminum shower door track.

Start with the white wall grout. It is on the label, and the color question does not come up. Open a window, turn on the fan, and rinse off any other cleaner first. Spray the joints until wet and wait until the stains fade. For a full kill, give it the 10 minutes the label sets for grout, then rinse with clean water. A second round is fine, since the label says heavy mildew may need "two cleanings."

Now the charcoal floor grout. The label still allows it, but this is where color can change, so test first. Pick a joint behind the door or in a corner you do not see, then spray it, leave it 10 minutes, rinse, and let it dry overnight. Dark grout looks darker when wet, so judge it only once it is dry.

If the test joint matches the rest, treat the floor corners the same way, spraying every joint in the area and not just the black spots. Rinse it all at once, so no patch gets a longer dose. If the test joint came up lighter, stop and use oxygen bleach on the floor instead.

Then the metal. The label says to avoid prolonged contact with metal and to keep it off aluminum, so wipe any overspray off the drain and the door track at once.

Change one fact and the answer shifts. If the floor grout had been sealed, the Aqua Mix rule applies: no bleach as a routine, and a water drop test after any spot use. If it had been recolored with a colorant, skip Tilex on it. If the grout were epoxy, Tilex is fine for a short, rinsed spot clean.

Grout by grout: where the makers draw the lines

White or light cement grout, unsealed. Yes, because the label names grout. Use the stain or 10-minute kill directions, then rinse.

Colored cement grout, unsealed. Spot use only, after a hidden test. TEC bans bleach as a routine cleaner, and Simple Green says it leaches color from tinted grout, so reach for oxygen bleach first.

Sealed cement grout. Not as a routine. The 2024 Tilex label lists "Sealed Grout," but Aqua Mix says no bleach on its sealer. The label speaks for the grout and the sealer sheet speaks for the sealer, so after any spot use, do a water drop test. See how often to seal grout.

Recolored grout. Keep it off, since TDS-173 says high-alkaline cleaners affect colorant wear. See grout colorant.

Epoxy grout. Yes for a short, rinsed spot clean. LATICRETE's chart for SPECTRALOCK PRO Premium (DS-681.0-0217) rates 5 percent sodium hypochlorite "R," recommended, at 30 minutes and 24 hours, and "NR," not recommended, at 7 days. The US label puts Tilex at 2.4 percent, under half that strength, and you rinse it off within 10 minutes. More in cleaning epoxy grout.

Natural stone. Not covered. Clorox's page names synthetic marble, and the 2024 label lists cultured marble. Neither names real marble, limestone or travertine, so the label does not cover them. See grout for natural stone.

Old grout and caulk. The label admits Tilex "may not be able to remove mildew embedded in ... old grout or silicone caulking." Grout mold and mildew covers what to do next.

Tilex or not: grout by grout

Tilex on grout, from the EPA labels, Clorox's sheets and grout, sealer and epoxy makers' rules above
Grout and jobUse Tilex Mold & Mildew Remover?Why
White or light cement grout, mildew stainsYes: spray, wait until stains go (10 min to kill), rinseEPA 5813-24 label (2003 to 2024): "grout and cement ... 10 minutes, and rinse"
Colored cement grout, unsealedSpot use after a hidden-joint test; oxygen bleach firstTEC: no bleach "routinely"; Simple Green: bleach leaches color; Clorox silent on color
Sealed cement groutNot routine; water drop test after spot useAqua Mix TDS-158: "Do not use cleaners containing ... bleach"
Recolored grout (colorant)NoAqua Mix TDS-173: high-alkaline cleaners "will affect wear"; Tilex pH 12.4-12.8
Epoxy groutYes for spots, rinsedLATICRETE DS-681.0-0217: 5% hypochlorite R at 24 h, NR at 7 days
Natural stone tileNot covered by the labelLabel lists cultured marble only; Clorox page: synthetic marble
Joints beside metal or aluminum trimKeep spray off the metal; wipe oversprayLabel: "rusty" stain on metal; aluminum "will discolor"
Soap scum filmUse Tilex Soap Scum Remover instead, never right after the bleachLabel: "FOR SOAP SCUM PROBLEMS"; SDS: formaldehyde gas if mixed with bleach
Mildew deep in old grout or caulkMay not workLabel: "may not be able to remove mildew embedded in ... old grout or silicone caulking"

Bottom line: Tilex Mold & Mildew Remover is made for grout, and its EPA label says so. On white cement grout, spray it, wait until the stains go (10 minutes to kill mold), and rinse. On colored grout, Clorox gives no warning, but grout and sealer makers keep bleach out of routine care, so test a hidden joint first or use oxygen bleach. Keep it off recolored grout, sealed grout as a habit, stone and metal. Never follow it with the Tilex soap scum spray or any acid without a rinse in between.

How to use Tilex on grout

  1. Check the bottle. "Mold & Mildew Remover" or "Instant Mildew Remover" is the bleach one, and "Soap Scum" and "Fresh Shower" are not.
  2. Check the grout. White cement or epoxy: go ahead. Colored: test first. Recolored: stop. Stone tile: stop.
  3. Rinse off other cleaners with clean water first, above all any acid, vinegar or soap scum spray.
  4. Open a window and turn on the fan. The label says Tilex is not recommended for people with heart conditions or asthma. Wear eye protection, and gloves for sensitive skin or long jobs, as the label asks.
  5. Spray until the joints are wet. Keep it off metal and aluminum, or wipe it off right away.
  6. Wait. Until the stains go, or 10 minutes to kill mold and mildew in the grout.
  7. Rinse with clean water. Grout is porous and holds what dries in it, so rinse it well. Grout porosity and absorption explains why.
  8. Repeat once if needed. The label allows "two cleanings" for heavy mildew.
  9. Dry the shower. Run the fan after every shower. Clorox's own advice for keeping mildew away is better airflow: "installing a fan or opening a window."

Clorox says the bleach in Tilex "loses its strength after one year," so an old bottle that seems to do nothing may simply be spent.

Tilex, Lysol or plain bleach?

All three are chlorine bleach. Lysol Mold & Mildew Remover is 2.0 percent on its label and allows 3 to 5 minutes on grout. Tilex is 2.4 percent and sets 10 minutes to kill mold in grout. RMR-86 is bleach too, but it has no EPA registration, so it is sold as a stain remover with no kill claim. The three sprays come ready to use, while plain bleach is mixed in a bucket, which bleach on grout covers. None of them is a routine grout cleaner, by TEC's rule. Clorox wipes are bleach-free and safe on any grout, but they do not lift mildew stains.

Where this answer stops applying

This page covers Tilex Mold & Mildew Remover on its EPA labels from 1996 to 2024 and its 2021 Canadian SDS, the CloroxPro Instant Mildew Remover, and the two bleach-free Tilex products on their 2021 sheets. The Tilex grout pen is not covered here; its 2011 sheet lists bleach at 0.5 to 2 percent, and do grout pens work sets it beside the paint-type grout pens. Other Tilex sprays and products sold outside North America may differ, so read the sheet for yours. No source found measures how much color or sealer one Tilex treatment removes, so this page gives no figure. It does not rule on premixed acrylic or urethane grout, or on grout younger than its cure time; their makers' care sheets govern, and grout cure time covers the wait. Grout that is soft, sandy or cracked has a cause other than mildew, and bleach will not fix it. The breathing warnings apply on any surface: use it only with fresh air moving through the room.

Frequently asked questions

Is Tilex safe on grout?

Yes on cement and epoxy grout. Its EPA label names grout and cement and says to let it stand 10 minutes to kill mold and mildew, then rinse. Keep it off recolored grout, and use it only now and then on sealed grout.

Will Tilex bleach colored grout?

Clorox does not say it will or will not, and no maker has published a test. TEC says not to use bleach on its grout as a routine, and Simple Green says chlorine bleach leaches color from tinted grout. Test a hidden joint, and use oxygen bleach for routine stain work.

How long should Tilex sit on grout?

To lift stains, until they disappear. To kill mold and mildew in grout, 10 minutes, since the 5-minute time on the label is for glazed tile. Rinse in both cases.

Do you have to rinse Tilex off grout?

Yes. Every set of directions on the label ends with "rinse." Grout is porous, so rinse it well rather than let bleach dry in the joints.

What is in Tilex Mold and Mildew Remover?

Sodium hypochlorite, the chemical in chlorine bleach: 2.4 percent on the US label. The Canadian SDS also lists sodium hydroxide at 0.1 to 1 percent and gives pH 12.4 to 12.8.

Is there a Tilex without bleach?

Yes. Tilex Soap Scum Remover and Tilex Fresh Shower Daily Shower Cleaner contain no bleach. Their sheets list them as a disinfecting bathroom cleaner and a shower spray, and neither is sold as a mildew stain remover, so on colored grout, oxygen bleach is the stain tool. See soap scum and hard water on grout.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.