Is Borax Safe on Grout?

CleaningUpdated 15 min readHow we research

On this page
  1. What borax is
  2. What Henkel's safety data sheet says
  3. How strong is borax next to grout?
  4. Does borax kill mold on grout?
  5. The three real risks: residue, scrubbing and handling
  6. A worked case: one bathroom, four surfaces
  7. Grout by grout: where the makers draw the lines
  8. Borax or not: grout by grout
  9. Borax, OxiClean or peroxide and baking soda?
  10. How to clean grout with borax
  11. Where this answer stops applying
  12. Frequently asked questions
  13. Sources and standards

Yes. Borax is safe on cement and epoxy grout when you dissolve it in warm water, wipe or scrub, and rinse. It is a mild alkali, pH 9.3 on the maker's safety data sheet. That is less alkaline than cement grout itself, so it does not eat the joint the way vinegar does. It is not a mold killer, though. The box has no EPA registration for that. The real risks are residue left to dry in the joint, wear from scrubbing a gritty paste, and handling, since the sheet calls it a skin and eye irritant.

Key takeaways

  • 20 Mule Team Borax is 60 to 100 percent sodium tetraborate decahydrate, pH 9.3, per Henkel's safety data sheet (April 9, 2018). It has no bleach and no peroxide.
  • Cement grout is more alkaline than borax: MAPEI's Keracolor S grout reads pH 11.00 in water. Oven cleaner reads 13.3. Borax sits well below both.
  • Borax does not have an EPA registration to kill mold on grout. EPA's only product named "20 Mule Team Borax" protected lumber and pine stumps, and it was cancelled in 1995.
  • Henkel itself claims only that borax "helps fight odors that are caused by mold and mildew." For mildew stains, oxygen bleach or a registered mold product does more.
  • The sheet lists skin and eye irritation and a reproductive toxicity warning (Category 2). Wear gloves, keep dust out of your eyes, and store the box away from kids and pets.

What borax is

Borax is a white mineral salt made of sodium, boron and oxygen, with water locked into its crystals. Its chemical name is sodium tetraborate decahydrate. In the US most people buy it as 20 Mule Team Borax, a laundry booster sold by Henkel. Henkel's safety sheet puts it plainly: "This product is a laundry care product."

Borax dissolves in water and makes the water alkaline. On the pH scale, 7 is neutral. Below 7 is acid, like vinegar. Above 7 is alkaline, like baking soda, ammonia or lye. Each whole step is ten times stronger than the one before. Alkaline cleaners loosen greasy and body-oil soil. Acids dissolve mineral scale, and they dissolve cement too.

Three grout terms decide the answer. Cement grout is the common sanded or unsanded grout you mix with water. It is porous, full of tiny holes that soak up water and whatever is dissolved in it. Sealed grout has a clear sealer soaked into those holes. Recolored grout has a thin colored coating, called a colorant, painted over the joint.

Borax is not boric acid. Henkel's own comparison page says the two are "sometimes confused," and that boric acid is made by adding an acid to borax. This page is about the laundry powder in the box.

What Henkel's safety data sheet says

A safety data sheet (SDS) is the maker's legal record of what a product contains and how it can hurt you. Henkel's sheet for 20 Mule Team Borax is revision 001.3, issued April 9, 2018.

20 Mule Team Borax, from Henkel's safety data sheet, revision 001.3 (April 9, 2018)
ItemWhat the sheet says
IngredientSodium tetraborate decahydrate, CAS 1303-96-4, 60-100%
pH"9.3 Aqueous solution" (strength not stated)
Hazard classesSkin irritation 2, eye irritation 2A, reproductive toxicity 2
Hazard wording"Suspected of damaging fertility or the unborn child."
Protection"Wear eye and face protection. Wear protective gloves."
Storage"Store locked up."
Does not mix with"Strong oxidizers, acids, zirconium"
Use"This product is a laundry care product."

Two things stand out. First, the sheet lists one ingredient, and it is not an oxidizer. There is no chlorine bleach and nothing that releases hydrogen peroxide. Second, the reproductive warning is real but specific. The sheet says sodium borate and boric acid harm male fertility "when given to animals by mouth at high doses." The same sheet notes that its hazard ratings are written for workplaces, and says consumer use is "safe under normal and reasonable foreseen use."

House Digest's borax page gives a pH of "approximately 9.24," close to Henkel's figure. Most of the other top results give no pH or ingredient at all.

How strong is borax next to grout?

Here is borax beside the cleaners it gets compared with and beside cement grout itself. Each figure is the pH that maker's sheet reports. The sheets do not all test at the same strength, so read this as a ranking, not an exact gap.

Borax next to grout and other alkaline products, pH as each maker's sheet reports it
Product (sheet, date)Main ingredientspH
20 Mule Team Borax (Henkel SDS 001.3, April 9, 2018)Sodium tetraborate decahydrate 60-100%9.3
OxiClean Stain Remover Powder (MSDS-1605, June 8, 2011)Sodium carbonate 50-75%, sodium percarbonate 30-50%9-11 (1% in water)
Washing soda (Henkel's borax vs. washing soda page)Sodium carbonate11
MAPEI Keracolor S sanded grout (SDS v10, March 26, 2026)Portland cement11.00 (10% in water)
Aqua Mix Heavy-Duty Tile & Grout Cleaner (TDS-164, March 23, 2023)Alkaline cleaner sold for grout11-12
Easy-Off Heavy Duty Oven Cleaner (D8362392 v4.0)Sodium hydroxide 1-5%13.3, used straight

Borax is the mildest alkali on the list. Cement grout at 11.00 is nearly two pH steps above it. An alkali this mild cannot dissolve cement grout the way an acid does, because the grout is more alkaline than the cleaner. Henkel's own page agrees on the order: borax is "quite alkaline, though not quite to the same level" as washing soda.

So the House Digest line that "grout that isn't properly sealed may be vulnerable to corrosion" with borax does not hold up as chemistry. Acid is what attacks cement grout, as vinegar on grout explains. The grout cleaner pH chart places borax among the other household cleaners, and oven cleaner on grout covers the far end of the scale.

Does borax kill mold on grout?

No product claim says so, and the record is clear on why. In the US, any product sold to kill mold must be registered with the Environmental Protection Agency (EPA) as a pesticide. Its label then states which surfaces and how long. EPA's Pesticide Product and Label System (PPLS) lists every product ever registered.

A search of PPLS on November 12, 2026, for "20 Mule Team" returned 29 product names. Most were weed killers, wood treatments and insect products, and nearly all are cancelled. The two still listed active are a wood preservative and a roach and ant product. None is the laundry box, and none lists mold or mildew on tile or grout. The only one named "20 MULE TEAM BORAX" is EPA Reg. No. 1624-94. It is the same chemical, 100 percent sodium tetraborate decahydrate. It was registered by U.S. Borax, the company named on its label. Its uses were lumber treatment against decay fungi and termites, and treating fresh-cut pine stumps against a root-rot fungus, Fomes annosus. U.S. Borax asked EPA to cancel it, and that took effect January 9, 1995. Its label never mentions tile, grout or mildew.

So borates can stop fungi in wood, at the doses a wood label sets. The box on your laundry shelf is not registered for that, or for grout. Henkel's sheet lists no EPA number and calls it a laundry product. Henkel's own claim is narrower: borax "helps fight odors that are caused by mold and mildew." Its mildew recipe is called "Mildew Odor Remover."

One more Henkel line needs a check. Its all-purpose cleaner page says "When Borax mixes with water, the molecules will convert to hydrogen peroxide." Henkel's own safety sheet lists only sodium tetraborate decahydrate, which is not an oxidizer. Products that do release peroxide, such as OxiClean, list a peroxide source like sodium percarbonate on their sheets. Borax's sheet has none.

That settles the mold question. Borax will wash mildew soil off the surface of a joint, as any cleaner will. It is not a way to kill mold in grout. For a label that claims that, Tilex on grout covers a spray whose EPA label names grout, with 10 minutes of contact. On colored grout, start with oxygen bleach. Grout mold and mildew covers stains that keep coming back, which usually means water behind the tile.

The three real risks: residue, scrubbing and handling

Residue. Borax is a salt. If the solution soaks into a joint and the water dries off, the borax stays behind. The Handbook of Mineralogy says borax is "soluble in H2O" and "rapidly dehydrates in air." Henkel's mildew recipe ends with "gently scrub excess Borax from the area," which tells you some is left. A clean-water rinse removes it while it is still dissolved. Grout porosity and absorption explains why joints hold on to what dries in them.

Scrubbing. A borax crystal is soft. The Handbook of Mineralogy rates it 2 to 2.5 on the Mohs scale, which ranks minerals by which one scratches which. Geology.com lists calcite at 3 and glass at 4 to 7, so the grain is softer than glazed tile or glass. The wear comes from rubbing a gritty paste into bare grout again and again. LATICRETE's care sheet (TDS-1113) says "Powdered cleansers are not recommended for cleaning unsealed or unglazed tile, and many types of stone." Homedit's borax test (February 18, 2026) reached the same place: "Repeated abrasive cleaning can slowly wear grout down." Dissolve the powder and you take the grit out of the question.

Handling. The sheet rates borax as a skin and eye irritant and asks for gloves and eye protection. Henkel's safety page says "keep out of reach of children and pets" and "Do not ingest." The sheet says the dust may irritate the nose and throat, so pour the powder low and slowly. The sheet also lists acids as incompatible, so do not mix borax into a vinegar recipe.

A worked case: one bathroom, four surfaces

Take a bathroom with white glazed tile on the floor and white cement grout that was never sealed. It smells musty after showers, and the joints near the tub are gray. The shower walls have gray grout, sealed a year ago. The vanity backsplash grout was recolored with a colorant last week. A polished marble threshold sits at the door.

Start with Henkel's own recipe: 2 tablespoons of borax in 2 cups of warm water, stirred until it dissolves, in a labeled spray bottle. Henkel says to let it sit 3 to 5 minutes, then scrub. Put on gloves first.

The white floor grout is the easy case. It is cement, about pH 11, so the borax solution is milder than the joint. Spray, wait 3 to 5 minutes, scrub with a nylon brush, then rinse with clean water and wipe dry. The musty smell may fade. If gray spots stay after drying, that is mildew stain, and borax has no bleach to lift it. Switch to oxygen bleach, as OxiClean on grout describes.

The sealed shower grout can take the same spray now and then. Aqua Mix's sealer sheet bans "ammonia, acids or bleach," and borax is none of those. For weekly cleaning, use the neutral cleaner the sealer maker names. Afterward, a water drop test shows whether the sealer still beads water.

The backsplash waits. Aqua Mix says to avoid scrubbing a fresh colorant for 20 days. After that, a wipe with the dissolved solution and a soft cloth is all it gets. The marble threshold gets none of it. No stone maker's sheet found names borax, so use a cleaner made for stone there.

Grout by grout: where the makers draw the lines

Unsealed cement grout. Yes, dissolved and rinsed. Borax at pH 9.3 is milder than the grout (Keracolor S, 11.00). Rinse so no salt dries in the pores. Let new grout cure first; grout cure time covers how long.

Colored cement grout. Yes, rinsed. The sheet lists no bleach, so the chlorine fading covered in bleach on grout does not apply. Use it dissolved rather than as a gritty paste.

Sealed cement grout. Occasionally, yes. Aqua Mix Sealer's Choice Gold (TDS-158, March 23, 2023) says "Do not use cleaners containing ammonia, acids or bleach," and borax contains none. The same sheet says "high-alkaline" cleaners "will affect wear," and Aqua Mix sells its own pH 11 to 12 cleaner as the high-alkaline kind (TDS-164). Borax is milder than that. For routine care, the sheet names a neutral cleaner.

Recolored grout. Not for 20 days, then gently. Aqua Mix Grout Colorant (TDS-173, February 28, 2023) says "Avoid direct scrubbing on grout joints for 20 days," and lists "harsh cleaning methods" among things that "will affect wear." So no paste, ever: a dissolved wipe with a soft cloth only. See grout colorant.

Epoxy grout. Yes, rinsed. LATICRETE's chart for SPECTRALOCK PRO Premium (DS-681.0-0217) rates 45 percent potassium hydroxide, a much stronger alkali, "R" (recommended) for 7 days. The chart has no borax row. More in cleaning epoxy grout.

Polished marble, limestone or travertine next to the grout. Not cleared here. LATICRETE says powdered cleansers are not recommended on "many types of stone," and no stone maker's sheet found mentions borax. Use a stone cleaner; see grout for natural stone.

Killing mold in the joint. No. Borax has no EPA registration for it, and Henkel claims only mildew odor.

Borax or not: grout by grout

20 Mule Team Borax dissolved in water, from the Henkel sheet, EPA's records and the grout, sealer and colorant makers' rules above
Grout or jobBorax?Why
Unsealed cement groutYes, dissolved, rinsepH 9.3 (Henkel SDS) is below grout's 11.00 (Keracolor S SDS)
Colored cement groutYes, dissolved, rinseNo bleach on the sheet; one ingredient
Sealed cement groutOccasionally; neutral cleaner for routine careNot ammonia, acid or bleach (TDS-158); milder than the pH 11-12 high-alkaline cleaner (TDS-164)
Recolored groutNot for 20 days, then a dissolved wipe onlyNo scrubbing for 20 days; harsh methods affect wear (TDS-173)
Epoxy groutYes, rinse45% KOH rated R for 7 days (DS-681.0-0217)
Polished stone beside the jointUse a stone cleanerPowdered cleansers not for many stones (TDS-1113); no stone sheet names borax
Killing mold in groutNoNo EPA registration; Henkel claims odor only
Mixed with vinegar or other acidsNeverSDS lists acids as incompatible

Bottom line: Borax is safe on cement and epoxy grout, colored or white, when you dissolve it in warm water, let it sit a few minutes, scrub and rinse. At pH 9.3 it is milder than the grout itself. It is fine now and then on sealed grout, and it waits 20 days on recolored grout. It does not kill mold, so use it to clean and deodorize, and use oxygen bleach or a registered mold product on mildew stains. Wear gloves and keep the box away from kids and pets.

Borax, OxiClean or peroxide and baking soda?

All three are mild alkalis, and all three are safe on cured cement grout. What differs is the job.

OxiClean is sodium carbonate plus sodium percarbonate, pH 9 to 11. The percarbonate releases hydrogen peroxide in water, and that is what lightens organic stains like mildew spots and coffee. Borax has no such ingredient, so for stains, OxiClean does more. See OxiClean on grout.

Peroxide and baking soda is a paste: a soft grit with a mild oxidizer. It suits a few stained joints, not a whole floor. Peroxide and baking soda on grout breaks down what each part does.

Borax is the one to pick for general dirt and a musty smell when you want nothing that bleaches. For greasy kitchen joints, a stronger alkali works faster; TSP on grout covers one.

How to clean grout with borax

  1. Check the grout. Cement or epoxy: go ahead. Recolored in the last 20 days, or polished stone beside it: stop.
  2. Put on gloves. The sheet asks for gloves and eye protection.
  3. Dissolve it first. Stir 2 tablespoons of borax into 2 cups of warm water until clear, per Henkel's recipe. Label the bottle.
  4. Spray the joints. Let it sit 3 to 5 minutes. Do not let it dry.
  5. Scrub along the joint with a stiff nylon brush. Skip wire brushes and dry paste.
  6. Rinse with clean water and wipe dry, so no borax dries in the pores.
  7. Judge it dry. Gray spots that stay are stains; move to oxygen bleach. How to clean grout covers the next steps.

Where this answer stops applying

This page covers 20 Mule Team Borax on Henkel's 2018 safety sheet and Henkel's current web pages, and EPA's product records as searched on November 12, 2026. Other borax brands were not checked, so read their sheets. Henkel does not state the strength behind its pH 9.3, and the grout figure was measured at 10 percent, so the gap between them is a ranking, not a precise number. No study found measures how much grout, sealer or colorant borax removes over many cleanings, so this page gives no figure. It does not rule on premixed acrylic or urethane grout, whose makers' care sheets govern, or on polished stone. Grout that is soft, sandy or cracked needs repair, not cleaning. Mold that returns, or a smell with no visible growth, can mean water behind the tile, which no cleaner fixes. The handling rules apply every time: gloves, no dust in the eyes, no mixing with acids, and the box stored where children and pets cannot reach it.

Frequently asked questions

Will borax damage grout?

Not cement or epoxy grout when it is dissolved and rinsed. At pH 9.3 it is milder than cement grout itself, which reads about pH 11. The harm comes from scrubbing a dry paste into bare joints again and again, and from leaving it to dry in the pores.

Does borax kill mold on grout?

No claim supports that. 20 Mule Team Borax has no EPA registration as a mold killer, and Henkel says only that it helps fight odors caused by mold and mildew. Use a registered product, such as Tilex, whose label names grout.

Is borax safe on colored grout?

Yes, dissolved and rinsed. Its sheet lists no bleach, so it does not fade color the way chlorine does. Keep it off recolored grout for 20 days.

Can you mix borax and vinegar to clean grout?

No. Henkel's sheet lists acids as incompatible with borax, and vinegar is an acid that dissolves cement grout. Use them on separate days, rinsed in between, or skip the vinegar.

Is borax safe around kids and pets?

Only with care. Henkel says to keep it out of reach of children and pets and not to ingest it. The sheet lists skin and eye irritation and a suspected harm to fertility. Rinse floors well and store the box closed and up high.

Is borax better than baking soda for grout?

They do different jobs. Borax dissolves into an alkaline cleaning solution for general soil and musty smells. Baking soda is mostly a gentle scrub. Neither bleaches stains; for that, see peroxide and baking soda on grout.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.