Can You Use Clorox Wipes on Grout?
On this page
- What a Clorox wipe is, and what "hard, nonporous" means
- What is in the wipe, next to the Clorox products made for grout
- Will a Clorox wipe harm grout?
- Why a wipe does not disinfect grout
- Why a wipe does not remove mildew stains
- A worked case: a shower wall after a cold
- "Clorox" does not always mean bleach
- Clorox wipes, grout by grout
- How to use a Clorox wipe on tile and grout
- Where this answer stops applying
- Frequently asked questions
- Sources and standards
Yes, you can wipe grout with a Clorox wipe. It will not harm it. Clorox Disinfecting Wipes are bleach-free, with two quat disinfectants at 0.184 percent each and a pH of 6.25 to 8.5, close to neutral. But a wipe does two things less than people expect. It does not disinfect grout, because its EPA label covers only "hard, nonporous surfaces," and EPA has ruled that "Grout is a porous surface." And it does not remove mildew stains, because there is no bleach in it. For stains, Clorox's own grout directions use bleach, not wipes.
Key takeaways
- Clorox Disinfecting Wipes contain no bleach. The safety data sheet lists two quaternary ammonium chlorides at 0.184 percent each, a pH of 6.25 to 8.5, and "Not oxidising."
- That makes a wipe safe on any grout, colored or sealed. It has none of the ammonia, acid or bleach that sealer makers ban.
- Every kill claim on the wipes label (EPA Reg. No. 5813-79) is for hard, nonporous surfaces, kept visibly wet for 4 minutes. The label lists "Glazed Tiles," not grout.
- In 2005 EPA struck grout from a Clorox label with the words "Grout is a porous surface. All references to grout have been [removed]."
- Wipes carry no mold or mildew claim. Clorox's grout guide uses 1/3 cup of Clorox bleach per gallon of water, 10 minutes, then a rinse.
What a Clorox wipe is, and what "hard, nonporous" means
A Clorox Disinfecting Wipe is a cloth soaked in a weak disinfectant liquid. Clorox's sheet for the Fresh Scent version (product code USA004048, August 22, 2024) describes it as "Wipes saturated with liquid." The product page now calls the line Clorox Disinfecting Cleaning Wipes and sells it in Fresh Scent and Crisp Lemon.
The disinfectants are quaternary ammonium compounds, usually shortened to "quats." A quat is a detergent-like molecule that kills germs by breaking their outer layer. It is the same family Lysol uses in its all-purpose cleaner (see Lysol on grout). Despite the name, a quat is not household ammonia, and the sheet lists no ammonia among the ingredients.
The phrase that decides this question is "hard, nonporous surface." A nonporous surface does not soak up liquid. Glazed tile, sealed granite and stainless steel are on the wipes label because the liquid sits on top of them, where the germs are. A porous surface has tiny holes that take in water. Cement grout is porous. That is why a joint turns darker when it gets wet: water is moving into it (see grout porosity and absorption).
A disinfectant claim is a promise that the liquid reaches the germs and stays on them long enough to kill them. On a porous surface, some of the germs are below the face, inside the pores. A wipe that is wet for 4 minutes on the surface makes no promise about them.
What is in the wipe, next to the Clorox products made for grout
The word "Clorox" covers both bleach and bleach-free products. Gathered from Clorox's sheet, its product pages and the EPA files, the difference is plain:
| Product | Active ingredient | pH or strength | What it claims on grout |
|---|---|---|---|
| Clorox Disinfecting Wipes, Fresh Scent (EPA 5813-79) | Two quats, 0.184% each; no bleach | pH 6.25 to 8.5 | Nothing. Label lists glazed tile, not grout |
| Clorox Disinfecting Bleach | Sodium hypochlorite (chlorine bleach) | 1/3 cup per gallon on Clorox's grout page | Mold stains on grout: 10 minutes, scrub, rinse |
| Clorox Bleach Foamer & Grout Cleaner | Sodium hypochlorite | Ready to use | "Grout" on its surface list; wet 5 minutes, rinse |
| Clorox bleach sanitizer spray (EPA 5813-85, 2005) | Sodium hypochlorite 0.0095% | Very dilute | Grout claim struck by EPA: "Grout is a porous surface" |
The wipe holds 0.368 percent quats in total, and the label gives "Other ingredients" as 99.632 percent. It is a ready-to-use liquid, not a concentrate, so there is nothing to dilute and nothing to get wrong in the mix.
The sheet classes the wipe liquid as "Not classified" for hazards and "Not oxidising." That second line matters later, for stains. Bleach is an oxidizer; this liquid is not.
Will a Clorox wipe harm grout?
No. Every ingredient line points the same way.
The pH of 6.25 to 8.5 sits near neutral (pH 7). Acids dissolve cement grout. Aqua Mix lists "high-alkaline, acidic, or solvent-based cleaners" among the things that "will affect wear" of its sealer. This liquid is not acidic and not high-alkaline. For where other cleaners sit on that scale, see grout cleaners by pH.
It has no bleach. Clorox's product page calls the wipes "a bleach-free, all-in-one solution." So the fading that bleach on grout describes on colored joints does not apply.
It passes the sealer makers' rule. Aqua Mix Sealer's Choice Gold (TDS-158, March 23, 2023) says: "Do not use cleaners containing ammonia, acids or bleach. Use an appropriate TileLab® or Aqua Mix® neutral cleaner." The wipe has none of the three and is close to neutral.
The one surface Clorox warns about near tile is stone. Its product FAQ reads: "Avoid using them on unsealed wood, untreated stone, mirrors or inside appliances." The 2014 wipes label adds that it is "Not recommended for use on unpainted wood [or glass], unfinished, unsealed, unpainted, waxed, oiled or worn surfaces." So keep wipes off marble, travertine and other untreated stone tile, even though the grout between them would not mind.
Why a wipe does not disinfect grout
Read the label, and grout is never there. The wipes registration, EPA Reg. No. 5813-79, gives these directions on its 2014 filing: "TO DISINFECT [AND DEODORIZE]: Use to disinfect hard, nonporous surfaces. Wipe surface to be disinfected; use enough wipes for treated surface to remain visibly wet for 4 minutes. Let surface dry." To sanitize, the surface must stay wet for 30 seconds. Every germ claim on the label repeats "hard, nonporous." One more rule applies in kitchens: "For surfaces that may come in contact with food, a potable water rinse is required." Potable water is clean drinking water, so rinse a tiled counter after wiping it.
The surface list on that label names "Glazed Tiles" and "[Tiled] Walls." It does not name grout, sealed or unsealed.
EPA asked for that word. When EPA registered the wipes in December 2003, its notice to Clorox asked for one wording change: "Add 'glazed' to the word 'tile' on page four (4) of the label under 'Surface Claims'." The notice gives no reason. The change fits the rule, though: glazed tile has a glassy face, and unglazed tile can absorb water.
EPA has also ruled on grout directly. In June 2005 it registered a Clorox bleach sanitizer spray (EPA Reg. No. 5813-85, 0.0095 percent sodium hypochlorite) and struck several surfaces from the proposed label. Item i reads: "The proposed label indicates that the product can be used on grout [see page 5 of the proposed label]. Grout is a porous surface. All references to grout have been from the proposed label." The word "removed" is missing from EPA's sentence, but the meaning is clear. The same notice struck lunch bags and limited cutting boards to nonporous ones, for the same reason.
That product is a spray, not a wipe. But it is the same company, the same agency, and the same rule. If EPA would not let a Clorox bleach product claim grout, the bleach-free wipe has no grout claim either. Lysol's labels draw the same line (see Lysol on grout).
So what does a wipe do to grout? It cleans the face of the joint the way any damp cloth with a mild detergent does. No label promises that it kills anything there, on the face or in the pores below.
Why a wipe does not remove mildew stains
Mildew in a shower joint shows up as black, gray or pink spots. Wiping removes loose growth on the surface. The stain that stays behind is pigment in the pores of the grout.
Lifting that stain is a bleaching job. Chlorine bleach is an oxidizer, and it breaks down the colored compounds in mildew stains. The wipe's sheet says "Not oxidising," and the 2014 wipes label makes no mold or mildew claim at all.
Clorox's own grout guide agrees by what it chooses. Under "What should I use to clean & remove mold stains on grout?" it lists Clorox Disinfecting Bleach and Clorox Toilet Bowl Cleaner with Bleach. The wipes are not on it. The directions: "mix 1 gallon of water with 1/3 cup of Clorox™ Disinfecting Bleach," apply with a nylon brush, "Let the solution sit on mold-stained surface for 10 minutes," scrub, then "Rinse the grout and tiles thoroughly." Clorox also sells a Bleach Foamer & Grout Cleaner whose surface list starts with "Grout," with 5 minutes wet and a rinse.
Before using either of those, know that bleach lightens colored grout. On white cement grout it is the standard tool. On colored grout, oxygen bleach is the gentler choice (see OxiClean on grout). And if the spots come back within days, the cause is moisture, not the cleaner. Grout mold and mildew covers how to dry a shower out.
A worked case: a shower wall after a cold
Take a shower wall of white glazed ceramic tile with white cement grout, never sealed. Someone in the house has had a cold, and you want to disinfect the bathroom. There are a few gray mildew spots in the joints near the floor.
Walk it through the label. The tile face is glazed tile, which is on the label. Wipe it with enough wipes to keep it visibly wet for 4 minutes, then let it dry. That face is disinfected by the label's own terms.
The grout lines between the tiles got the same wipe, but the label does not cover them. They are cleaner, not disinfected. Nothing in the wipe harmed them, either.
The mildew spots are still there, because the wipe has no bleach. This grout is white and unsealed, so Clorox's grout method fits it: 1/3 cup of Clorox bleach in a gallon of water, brushed on, 10 minutes, scrubbed and rinsed. Rinse the wipe liquid off first, since the sheet says "Do not mix with other chemicals."
Change one fact, and the answer changes. If that grout were charcoal gray, the bleach step would risk fading it. The wipe step would stay exactly the same.
"Clorox" does not always mean bleach
Much of the confusion is the name. Clorox sells bleach under the same name, and many people say "Clorox" when they mean bleach. Read the grout threads that rank for this question and you see it. On Hometalk, one answer to "How do I clean grout on ceramic floors?" (November 24, 2018) recommends "Clorox Toilet Bowl cleaner. It is a gel." Another thread starts: "i have used Clorox bleach pen applied directly to the grout." Both are bleach products. Neither is a wipe.
So two answers circulate. One says Clorox is hard on grout, which is true of the bleach products on colored or sealed joints. The other says Clorox wipes are fine, which is true of the bleach-free wipes. Both are right about a different bottle. The 2014 wipes label offers the claim "Bleach[-]free [formula]," and Clorox's Bleach Foamer page sets the foamer beside its bleach-free products in one chart.
The toilet bowl gel is a separate case to keep off floor grout. Toilet bowl cleaner on grout compares the Clorox bleach gels with the acid gels sold beside them.
Clorox wipes, grout by grout
| Surface | Wipe it? | Why |
|---|---|---|
| Glazed ceramic or porcelain tile face | Yes, and it disinfects | "Glazed Tiles" on the label; visibly wet 4 minutes (EPA 5813-79) |
| Cement grout, unsealed | Yes, cleans only | pH 6.25-8.5, no bleach (SDS); grout is porous, no kill claim (EPA 5813-85) |
| Cement grout, sealed | Yes, cleans only | No ammonia, acid or bleach (TDS-158 rule); label never lists grout |
| Colored grout | Yes | "Bleach-free" (Clorox product page; SDS ingredients) |
| Mildew stains in the joints | No, use bleach or oxygen bleach | "Not oxidising" (SDS); no mold claim; Clorox's grout guide uses bleach |
| Marble, travertine or other untreated stone tile | No | "Avoid using them on ... untreated stone" (Clorox FAQ) |
| Tile grout on a counter that touches food | Yes, then rinse | "For surfaces that may come in contact with food, a potable water rinse is required" (2014 label) |
Not sure if your grout is sealed? The water drop test tells you in a few minutes. For this question it changes less than usual, since the wipe is safe either way and disinfects neither.
Bottom line: Use Clorox wipes on tile and grout as often as you like. They will not fade, etch or strip anything, because they are bleach-free and near neutral. They disinfect the glazed tile face if it stays wet for 4 minutes. They do not disinfect the grout, which EPA calls porous, and they will not remove mildew stains. For stains on white grout, use diluted bleach and rinse. On colored grout, use oxygen bleach.
How to use a Clorox wipe on tile and grout
- Check the tile. Glazed ceramic and porcelain are fine. Skip marble and other untreated stone.
- Wipe off heavy dirt first. The label says: "For highly soiled surfaces, clean excess dirt first."
- Use enough wipes to keep the tile visibly wet for 4 minutes. That is the label's rule. Take a fresh wipe when the surface stops looking wet.
- Run the wipe along the joints too. It lifts loose soil from the face of the joint.
- Let it dry. No rinse is needed, except on surfaces that touch food.
- Throw the wipe in the trash. The sheet says: "Do not flush."
- Treat stains separately. If spots remain, rinse the area, then use one of the bleach methods above. Never mix the two.
For a full routine, from plain water to the strongest cleaners, see how to clean grout, and for showers in particular, cleaning shower grout.
Where this answer stops applying
This page covers Clorox Disinfecting Wipes sold in the U.S. under EPA Reg. No. 5813-79. The composition and pH come from the Fresh Scent sheet dated August 22, 2024. Crisp Lemon, Scentiva, Free & Clear and the CloroxPro wipes have their own sheets and were not checked here, so read Section 3 and Section 9 of yours. Canadian and other national versions are separate formulas. No grout maker's sheet consulted for this page tests quat wipes on epoxy, urethane or recolored grout, so this page does not rule on them; follow the grout maker's care sheet. A wipe cleans sound grout. Joints that are sandy, cracked or missing need repair, not cleaning (see soft or crumbling grout). And "disinfected" on any label assumes you follow its contact time. A quick swipe that dries in seconds does not meet the 4-minute rule, even on glazed tile.
Frequently asked questions
Do Clorox wipes have bleach in them?
No. Clorox Disinfecting Wipes are bleach-free. The disinfectants are two quaternary ammonium chlorides at 0.184 percent each. Clorox's bleach products for grout are its Disinfecting Bleach and Bleach Foamer & Grout Cleaner.
Will Clorox wipes discolor grout?
No source shows that they do. There is no bleach in them, and the pH is 6.25 to 8.5. Bleach is what lightens colored grout, and it is not in the wipe.
Do Clorox wipes kill mold on grout?
No claim covers it. The wipes label has no mold or mildew claim, and every kill claim is for hard, nonporous surfaces. EPA has called grout porous. For mold stains, Clorox's grout guide uses diluted bleach.
Can I use Clorox wipes on a tile floor?
Yes, on glazed tile, for spot cleaning. "Floors" is on the label's list of surfaces. For a whole floor, a mop and a neutral cleaner cover more ground; see cleaning floor grout.
Does sealing grout make it nonporous?
Not for the label's purposes. The wipes label never lists grout, sealed or unsealed, so its disinfecting claim does not extend to any grout.
Sources and standards
- The Clorox Company, Clorox Disinfecting Wipes, Fresh Scent, safety data sheet, USA004048 v1.0 (August 22, 2024), EPA Reg. No. 5813-79
- US EPA, notice of pesticide registration and label, EPA Reg. No. 5813-79 (December 3, 2003)
- US EPA, accepted label, EPA Reg. No. 5813-79 (April 11, 2014)
- US EPA, notice of pesticide registration, EPA Reg. No. 5813-85 (June 9, 2005)
- Clorox, Clorox Disinfecting Cleaning Wipes, Fresh Scent, product page, directions and FAQ
- Clorox, How to Clean Grout Stains & Remove Mold Stains
- Clorox, Clorox Bleach Foamer & Grout Cleaner, product page
- Custom Building Products, Aqua Mix Sealer's Choice Gold, TDS-158 (March 23, 2023)
- Hometalk, "How do I clean grout on ceramic floors?" and "How do you get rid of mold/mildew in the 'white' grout on tiled walls?"
Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.