Can You Use Lime-A-Way on Grout?

CleaningUpdated 11 min readHow we research

On this page
  1. What is in the bottle
  2. Lime-A-Way, CLR, vinegar and Bar Keepers Friend side by side
  3. Why white grout passes and colored grout does not
  4. It is the same acid as a tile haze remover
  5. Sealed and recolored grout: no
  6. Epoxy grout: not the right tool
  7. The tile and fixtures beside the joint
  8. Lime-A-Way or not: grout by grout
  9. How to use it on grout that qualifies
  10. What to use when Lime-A-Way is ruled out
  11. Other products called Lime A-Way
  12. Why "it is a tile cleaner" and "never on grout" both circulate
  13. Where this answer stops applying
  14. Frequently asked questions
  15. Sources and standards

Only on white cement grout that has not been sealed, between glazed ceramic or porcelain tile, for a short dwell and a thorough rinse. Lime-A-Way is a sulfamic acid cleaner with a pH of 1, and Reckitt Benckiser's own safety data sheet says: "DO NOT use on natural marble, stone, terrazzo, polished or anodized aluminum, metallic or painted surfaces, coloured grout or counter tops." Never use it on colored, sealed or recolored grout, or anywhere near stone.

Key takeaways

  • Reckitt's Lime-A-Way sheets list sulfamic acid at 5 to 8 percent (2007, U.S. trigger spray) or 5 to 10 percent (2010, Canadian sprayer), with a pH of 1.0. That is more acidic than CLR (pH 2.1 to 2.3) or vinegar (about 2.4).
  • Colored grout is excluded by name. The pigment sits in the cement paste at the joint face, and acid dissolves that paste. On white grout the same loss does not show as a color change.
  • Sulfamic acid is what grout makers themselves name for stubborn haze, and Custom allows it on Polyblend Plus only "after ten days," after a test spot.
  • "Lime A-Way" sold outside the United States can be a different product: one Trinidad-made formula is phosphoric acid, pH 3.1 at 1 percent. Read the label on your bottle.

What is in the bottle

The front of the bottle says lime, calcium and rust. The safety data sheet names the acid. Three Reckitt Benckiser sheets for the household spray all give the same chemistry:

  • Lime-A-Way Lime, Calcium, Rust Cleaner with Dura Guard (trigger), product code 0084456, revised June 5, 2007: sulfamic acid 5 to 8 percent, ethoxylated alcohol (a surfactant) 1 to 3 percent, Gafquat 755N surfactant up to 0.5 percent, pH 1.0, "DANGER: CORROSIVE TO EYES AND SKIN!"
  • Lime-A-Way Cleaner Trigger (Reckitt Benckiser, Parsippany, sheet #20106, issued March 9, 2010): sulfamic acid 2.5 to 10 percent, pH 1.
  • Lime-A-Way Cleaner (Sprayer) (Reckitt Benckiser Canada, sheet #19921, issued May 12, 2010): sulfamic acid 5 to 10 percent, pH 1, and the surface warning quoted above, in the handling section.

All three ship it as UN 3264, "Corrosive Liquid, Acidic, Inorganic," class 8. A copy of the Canadian sheet circulates online under the file name "Thick Gel Formula," but the product named on the sheet itself is the sprayer. We did not find a sheet for the gel.

On the pH scale, 1.0 against CLR's 2.1 to 2.3 is more than a tenfold difference in acidity, because each whole pH unit is a factor of ten (grout cleaners by pH explains the scale). Concentration and contact time matter too, but pH places Lime-A-Way with the strong descalers.

Lime-A-Way, CLR, vinegar and Bar Keepers Friend side by side

These are the four acids people reach for on shower scale, gathered from each product's own sheets:

Four household descalers on grout, by acid, pH and what the maker says about grout and stone
ProductAcidpHGrout rule from the makerContact time the maker givesStone
Lime-A-Way (Reckitt)Sulfamic acid, 5 to 10%1.0"DO NOT use on ... coloured grout"None on the safety data sheetsNot on natural marble, stone or terrazzo
CLR Calcium, Lime & RustLactic acid, 10 to 20%2.1 to 2.3Not on "colored grout (any other color than white)" or sealed surfaces2 minutes, then cold waterNot on natural stone, marble or terrazzo
Bar Keepers Friend powderOxalic acid, 5 to under 10%1.5 to 2.5None stated on the label"Rinse thoroughly within a minute"Not on granite or marble
White vinegarAcetic acid, about 5%About 2.4No label rule (a food product)NoneEtches calcareous stone

Two of the four exclude colored grout by name, and the two that do not are not gentler: Bar Keepers Friend reaches a pH as low as 1.5 and adds an abrasive, and vinegar simply has no label that addresses grout at all. Where Lime-A-Way's sheet is silent, on dwell time, the other labels set the ceiling: CLR, a weaker acid, allows 2 minutes, and Bar Keepers Friend allows one.

Why white grout passes and colored grout does not

Nobody on the label explains the colored-grout ban, but the chemistry does. MAPEI's technical bulletin on grout haze describes what any acid does to cement: "Acids work by attacking calcium, breaking it down and dissolving it from the surface." The same bulletin adds: "Normally, pigments and latex come off with the cement during the acid rinsing."

That sentence is about haze, but a joint is the same material. In cement grout the pigment is carried in the fine cement paste at the joint face. Each acid pass dissolves a thin layer of that paste, and the pigment goes with it. The joint reads lighter and rougher, with more sand showing, the pattern described in fading grout. A single pass rarely shows. Regular use does.

White grout loses paste in exactly the same way. The difference is that removing white paste reveals more white paste and pale sand, so there is no color change to see, and the joint looks brighter because the stained skin went with it. It is still worn: the surface roughens and soils faster afterwards, which is why cleaning white grout treats acid as an occasional spot job. "White grout is allowed" means the damage is cosmetically invisible, not that it is absent.

Gray counts as colored: CLR's FAQ defines colored grout as "any other color than white," and gray, beige and almond grouts all carry pigment in the paste. The grout makers draw the same line. LATICRETE's PERMACOLOR Grout data sheet (DS-250-1026) says: "DO NOT use acid to clean colored grout joints." Its routine maintenance advice is a neutral pH cleaner.

It is the same acid as a tile haze remover

Custom Building Products' data sheet for Polyblend Plus Sanded Grout (TDS-360, March 22, 2023) gives the grout maker's own route for stubborn haze: "If haze persists, the installation can be washed after three days with Aqua Mix NanoScrub or after ten days with Aqua Mix Sulfamic Acid Crystals, TileLab Sulfamic Acid Cleaner or Aqua Mix Cement Grout Haze Remover. Perform a test in an inconspicuous area prior to complete application."

So a grout maker that sells sulfamic acid will not put it on its own grout for ten days, after which it still wants a test spot. Lime-A-Way on new grout is out. Cement grout keeps hardening well past that (how cement grout cures). Haze removal is a one-off job, not a routine; if your problem is haze, use the method in how to remove grout haze rather than a bathroom spray.

Sealed and recolored grout: no

The sealer makers set this rule. Aqua Mix Sealer's Choice Gold (TDS-158) says: "Do not use cleaners containing ammonia, acids or bleach," and that the sealer "will not prevent surface wear or etching from acids." Sealing does not make colored grout safe, and the acid shortens sealer life on white grout.

You cannot tell sealed grout by looking. The water drop test settles it in a few minutes: if water beads, the sealer is working and acid is the wrong cleaner. Grout recolored with a colorant is a coating over the joint, and the sheet excludes "painted surfaces" outright; grout colorant covers how to clean it.

Epoxy grout: not the right tool

Epoxy has no cement binder for acid to dissolve, but LATICRETE's SPECTRALOCK PRO Premium Grout data sheet (DS-681.0-0217) says the grout is not for "applications exposed to high concentrations of food and mineral acids." Its chemical resistance chart rates 5% lactic and 10% oxalic acid R (recommended) for 7 days, but rates 20% sulfuric acid NR at 7 days, and sulfamic acid is not on the chart at all. With no rating for the acid in the bottle, skip it: soil on epoxy comes off with an alkaline cleaner and a white nylon pad, as cleaning epoxy grout describes.

The tile and fixtures beside the joint

A spray reaches the tile edge too, and the Reckitt sheet is specific:

  • Natural stone, marble, terrazzo, counter tops: no. Calcite stone etches before the grout shows any change; grout for natural stone covers stone-safe care.
  • Older or worn glazes: test first. "May etch some older or worn porcelain tubs and sinks or ceramic tile. If in doubt, test hidden areas first."
  • Metallic glazes and metal: no. "Metallic or painted surfaces" and "polished or anodized aluminum" are excluded. That includes aluminum tile trim.
  • Glazed ceramic and porcelain in good condition: yes. That is the surface the product is made for.

Lime-A-Way or not: grout by grout

Lime-A-Way on grout: what the Reckitt sheets and the grout and sealer data sheets allow
SituationLime-A-Way?WhyUse instead
White cement grout, unsealed, cured 10+ days, glazed ceramic or porcelainYes, occasionallyThe case the sheet allows; loss of paste does not show on whiteSpot use on scale, short dwell, two rinses
Gray, beige or any colored cement groutNo"DO NOT use on ... coloured grout"; LATICRETE: no acid on colored jointsAlkaline cleaner and a nylon brush
Sealed grout, any colorNoTDS-158: no cleaners containing acidsThe sealer maker's neutral cleaner
Recolored grout (colorant)NoA coating; "painted surfaces" are excludedNeutral cleaner, soft tool
Grout under 10 days oldNoCustom allows sulfamic acid only "after ten days"Damp sponge and cheesecloth
Cured epoxy groutNoSulfamic acid is not on the resistance chart; not for high concentrations of mineral acidsAlkaline cleaner, white nylon pad
Any grout beside marble, travertine, limestone or terrazzoNeverExcluded on the sheet; acid etches calciteStone-safe neutral cleaner

Bottom line: Lime-A-Way is a pH 1 sulfamic acid descaler. It is acceptable on white, unsealed, sound cement grout between glazed ceramic or porcelain tile, as an occasional spot treatment for mineral scale, rinsed promptly. On colored, gray, sealed or recolored grout, epoxy, or anything near stone, use a non-acid cleaner instead. If you want an acid on white grout, CLR does the same job at a milder pH and comes with a stated 2-minute limit.

How to use it on grout that qualifies

  1. Confirm the grout is white, unsealed and cement. Drop-test a joint. If water beads, stop. If you are unsure whether it is cement or epoxy, treat it as the grout you cannot use it on.
  2. Protect yourself and the room. Rubber gloves and chemical goggles, as the sheet asks, and the exhaust fan on: "Use only in a well ventilated area." Never spray it towards your face, and never mix it with bleach or another cleaner: the 2010 sheet warns "DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS." If you have used bleach on grout, flush it out first.
  3. Pre-wet the joints with clean water. Water-filled pores take up less acid.
  4. Test a hidden joint. Judge it the next day, dry, beside an untreated joint; grout reads darker wet.
  5. Work a small section. Apply to the scale, agitate with a nylon brush, and rinse within a minute or two. The Reckitt sheets give no dwell time; CLR, a milder acid, stops at 2 minutes.
  6. Rinse twice. Clean water, sponged up, then again.

A deposit that does not change under acid is not mineral. Stop rather than repeat.

What to use when Lime-A-Way is ruled out

Most shower film is not pure scale, and the non-acid routes suit any grout color:

  • Soap scum and hard water film. Soap scum responds to an alkaline cleaner; only true scale needs acid. Soap scum and hard water on grout shows how to tell them apart with a scratch test.
  • Black or pink spots. Mildew is organic; acid does nothing useful. See grout mold and mildew.
  • Orange rust marks. Lime-A-Way lists rust, but there are gentler rust removers for grout; rust stains on grout sorts them.
  • White crust that keeps returning. Usually efflorescence, which acid removes only until more arrives. Efflorescence on grout deals with the water source.

Other products called Lime A-Way

The name is used on more than one formula. A technical sheet for "Lime A-Way: Lime Scale Remover for Bathroom and Kitchens," made in Trinidad and Tobago by Chem Clean Limited (sheet ICS-LAW-049), lists phosphoric acid at a total concentration below 30 percent, a pH of 3.1 plus or minus 0.4 in a 1 percent solution, and directions to use it full strength or "mix with equal parts of water," then "Rinse surfaces with clean water promptly after use." A different market's formula, same warnings: "Lime A-Way may etch some ceramic tiles, tubs and sinks if left in contact too long" and "Avoid contact on coloured grout."

Ecolab also sells a Solid Lime-A-Way, a commercial delimer that is 30 to 60 percent each sulfamic and citric acid with urea and salicylic acid, pH 1.0 to 2.0 at 1 percent. It is not a tile cleaner, and nothing on this page applies to it.

The colored-grout rule holds on every Lime-A-Way formula we found, whatever the acid. It also holds for other sulfamic acid sprays sold under other names, such as the Heavy Duty bottle covered in Kaboom on grout.

Why "it is a tile cleaner" and "never on grout" both circulate

Lime-A-Way is sold as a bathroom tile and shower cleaner, and the Chem Clean sheet lists "tile walls, shower walls" among its uses, so people reasonably assume the grout between the tiles is included. The exclusions sit in the fine print: in the Reckitt sheet they are in section 7, under handling. The "never acid on grout" camp is right about the chemistry and wrong about the label: white unsealed grout is permitted, because the damage there does not show.

Where this answer stops applying

The composition here comes from Reckitt Benckiser sheets dated 2007 and 2010, and the 2010 Canadian sheet carries an expiry date of May 15, 2013. A newer formula or label may exist, so read the bottle you have, especially the "do not use on" list. We did not find a sheet for the thick gel, and the non-U.S. and Ecolab products are different chemistries. Joints that are already sandy or low need spot grout repair, not a stronger cleaner.

Frequently asked questions

What acid is in Lime-A-Way?

Sulfamic acid, 5 to 8 percent in the 2007 U.S. trigger spray and 5 to 10 percent in the 2010 sheets, with a pH of 1.0. Some products sold as Lime A-Way outside the U.S. use phosphoric acid instead.

Is Lime-A-Way stronger than CLR?

By pH, yes: 1.0 against CLR's 2.1 to 2.3, more than ten times the acidity. Both exclude colored grout. On white unsealed grout, CLR is the milder choice and states a 2-minute limit.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.