Can You Use Bona on Tile and Grout?

CleaningUpdated 16 min readHow we research

On this page
  1. What Bona tile cleaner is, and what "sealed" means here
  2. What Bona's label and sheets say
  3. Why a pH-neutral cleaner carries a staining warning
  4. "Works on all grout": the dealer answer checked
  5. A worked case: travertine with porous grout
  6. What to use on unsealed grout instead
  7. Epoxy grout and natural stone
  8. Can you use Bona Hardwood Floor Cleaner on tile?
  9. Bona or not: floor by floor
  10. How to use Bona on a tile floor with grout
  11. Where this answer stops applying
  12. Frequently asked questions
  13. Sources and standards

Yes, on glazed ceramic or porcelain tile with sealed grout. Bona Stone, Tile & Laminate Floor Cleaner, now sold as Bona Hard-Surface Floor Cleaner, is pH neutral and cannot dissolve grout. But the label limits it to "ceramic tile with sealed grout lines" and warns that use on "unsealed stone or grout lines may cause staining." The reason is not the pH. Bona is a spray you never rinse, and unsealed cement grout soaks up whatever dries in the joint. Seal the grout first. Until then, mop with clear water or a neutral cleaner and rinse.

Key takeaways

  • Every Bona tile cleaner sheet found is close to neutral: pH 7.0 to 8.0 on the Pro Series data sheet (rev 11/17), pH 7 on the 2015 and 2019 safety sheets, and pH 6 to 6.5 on the 2022 US sheet for Hard-Surface Floor Cleaner.
  • The label says it is "for use on ceramic tile with sealed grout lines" and that "unsealed stone or grout lines may cause staining." That is the maker's own limit, printed on the bottle.
  • The warning is about absorption, not chemistry. The directions are vacuum, mist, clean, with no rinse step, and unsealed cement grout is porous.
  • A Bona dealer's staff told one buyer it "will work on travertine tile and all grout." The label says otherwise. Follow the label.
  • Bona Hardwood Floor Cleaner is sold for "unwaxed, unoiled, polyurethane finished wood floors." For tile, use the Hard-Surface cleaner, as a Bona dealer also advises.

What Bona tile cleaner is, and what "sealed" means here

Bona is a Swedish floor care company best known for wood floor finishes. Its tile product has had three names. The pro version is Bona Pro Series Stone, Tile & Laminate Cleaner. The store version was Bona Stone, Tile & Laminate Floor Cleaner. Bona's US site now calls it Bona Hard-Surface Floor Cleaner, item WM700051184, with "Stone, tile & laminate floor cleaning solution" under the name. All of them are ready to use. You spray a fine mist on the floor and wipe it with a microfiber mop pad.

Two words decide this question.

pH neutral means the liquid is neither acid nor alkali. The pH scale runs from 0 to 14, and 7 is neutral. Acids, below 7, dissolve the cement that holds grout together. That is why vinegar and acid cleaners come with grout warnings. A cleaner near 7 has nothing in it that can eat a joint. The grout cleaner pH chart sets the common products side by side.

Sealed grout is cement grout with a penetrating sealer in its pores. Cement grout is porous: it is full of tiny connected holes left behind by its mixing water. Those holes let water, oils and dissolved stains wick into the joint, which is why wet grout turns darker. Grout porosity and absorption explains how they form. A sealer lines the pore walls so water beads on top instead of soaking in. Unsealed grout has no such lining. Daltile's care guide says cement grout "should be sealed after installation to prevent the color from staining."

So a cleaner can be gentle and still leave a mark. pH tells you whether it attacks the grout. Porosity tells you whether the grout drinks it.

What Bona's label and sheets say

The caution on the bottle, as printed in the Publix delivery listing for the 22 oz Bona Stone, Tile & Laminate Floor Cleaner, reads: "Bona® Stone, Tile & Laminate Cleaner is for use on ceramic tile with sealed grout lines, sealed marble, sealed granite, other sealed stone, laminate and vinyl flooring. Use of this product on unsealed stone or grout lines may cause staining."

The directions are four steps: "1. Vacuum, sweep or dust mop 2. Mist 3. Clean 4. Refill." Then: "Rinse cleaning pad often to avoid streaking." Rinsing the pad is the only rinse. The floor itself is never rinsed. The same listing sells it as a "rinse-free, streak-free formula."

Bona's US product page says the same thing in other words. It calls the formula "gentle, pH neutral" and "rinse-free," and lists where it is safe: "stone, no-wax sealed tile, laminate and luxury vinyl (LVT)." The retail listing spells out what no-wax sealed tile means: "no-wax sealed tile (ceramic, Mexican Saltillo, quarry)." So saltillo and quarry tile are in scope only once they are sealed.

Here is every Bona sheet found for the tile cleaner:

Bona tile and stone floor cleaners, from Bona's own data sheets and labels
Sheet and dateListed ingredientsColorpH
Pro Series Stone, Tile & Laminate Cleaner, safety data sheet, version 1 (May 21, 2015)None listed as hazardous; "Not classified"Light turquoise7
Pro Series Stone, Tile & Laminate Floor Cleaner, technical data sheet (rev 11/17)Water, glycol ether solvents, nonionic and anionic surfactants; solids under 1%Light green (wet)7.0 to 8.0
Stone, Tile and Laminate Cleaner, Australian safety data sheet, revision 2.0 (May 1, 2019)"Non-hazardous ingredients To 100%"Light turquoiseTypically 7
Hard-Surface Floor Cleaner (780), US safety data sheet, version 0.02 (June 17, 2022)None listed as hazardous; "Not classified"Clear6 to 6.5
Hard-Surface Floor Cleaner, ingredient list on bona.com (2026)Water, isopropylideneglycerol (a solvent), two glucoside surfactants, hydrogen peroxide, sodium bicarbonate, citric acid, preservativesNot stated"pH neutral"

From 2015 to 2022, in the US and Australia, the number barely moves: 6 to 8. None of the sheets lists ammonia or chlorine bleach. The 2026 list does name hydrogen peroxide, with no amount, and Bona files it as a solvent. The citric acid on the 2026 list is there as a "pH Regulating Agent," which holds the liquid near neutral. It is not an acid cleaner. The surfactants are the cleaning agents: the part of any detergent that lets water lift soil off a surface. The glucoside kind is made from sugar and plant oils.

One thing does change. The older formulas were tinted light green or turquoise. The Publix listing still names "Colorants" in its ingredient line. The 2022 US sheet says "Clear," and the bona.com list names no colorant. So which bottle you have depends on when and where it was made.

Why a pH-neutral cleaner carries a staining warning

Bona does not say what the stain is. It says only that unsealed grout lines "may" stain. But its own directions and the grout makers' care rules point to the cause, and it is the same one that shows up with any no-rinse mop.

Start with how the cleaner is used. You mist the floor and wipe it with a pad. The pad lifts most of the liquid and the soil in it, but not all. The Pro Series data sheet gives a drying time of 15 to 20 minutes. Whatever the pad leaves dries where it lies. On glazed tile, that is a thin film on a glassy face. In a grout joint, it is different.

Grout joints sit a little below the tile face, so the leftover liquid runs into them. A sealed joint keeps it on top, where the next pass of the pad can pick it up. An unsealed cement joint takes it into its pores. Then the water dries off and leaves behind what it carried: the dissolved soil from the tile, the surfactant, and on the tinted formulas, the colorant. None of that is harmful to the grout. It is just in the grout, and it does not wipe out.

Tile makers solve this with a rinse. Daltile says glazed tile "can be cleaned with clear water and/or a pH neutral liquid cleaner (soapless). Follow with a clear water rinse and wipe dry to prevent film formation." A rinse carries the leftover liquid away before it dries. Bona's method has no rinse, and that is exactly why its label stops at sealed grout. The same gap shows up with the Swiffer WetJet on grout, which also sprays, wipes and never rinses. Cleaning floor grout explains why joints act like gutters for any wet mop.

This is why the two answers that circulate both sound right. "Bona is pH neutral, so it is safe on grout" is true about chemistry. "Bona can stain grout" is true about absorption. The label answers both: safe on sealed grout, not on unsealed grout.

"Works on all grout": the dealer answer checked

Green Building Supply, which sells the Pro Series cleaner, runs a question page for it. On October 15, 2019, a buyer asked: "Can I use this on travine tile with porous grout?" A staff answer two days later said: "Yes this will work on travertine tile and all grout." It went on to suggest a hydrogen peroxide grout cleaner as "a better option" for getting grout clean.

That answer gets the cleaning right and the staining wrong. Bona will lift soil from travertine and grout; nobody disputes that. But Bona's own caution names both things in the question, "unsealed stone" and unsealed "grout lines," as the places it "may cause staining." A dealer's reply is not the maker's label. Where they disagree, the label is the one printed on the bottle. The worked case below walks that same floor through the label.

The same staff gave a second answer worth keeping. Asked whether the Pro Series cleaner leaves a shine on travertine, they wrote that it is "simple a cleaner and not a finish" and "does not add a coating to the surface." So Bona does not seal anything either. Unsealed grout stays unsealed however often you mop it.

A worked case: travertine with porous grout

Take the dealer's question as a real floor. Suppose it is a hallway of honed travertine with gray sanded cement grout, and nobody knows whether either was ever sealed.

First, test both. Put a few drops of water on the stone and a few on a joint. Suppose the joint darkens within a minute and the stone darkens a little more slowly. Both are taking in water, so both are unsealed. The water drop test page explains how to read it.

Now walk it through Bona's label. The caution names "unsealed stone or grout lines." This floor is both. So Bona is outside its own label twice over, whatever the pH.

Next, the fix. Seal the stone and the grout with a penetrating sealer made for stone, and let it cure for the time on its sheet. How to seal grout covers the joints, and grout for travertine covers that stone. Then repeat the drop test. If the water beads on both, the floor now matches "sealed marble," "other sealed stone" and "sealed grout lines." Bona is in its label from that day on.

Meanwhile, the floor still needs cleaning. Daltile's stone routine fits it: dampen the surface with clear water first, which "will keep the cleaning solution on the surface," apply a neutral stone cleaner mixed to its instructions, then rinse. That rinse is the step Bona leaves out.

Change one fact and the answer flips. If the hallway were glazed porcelain with grout that beads water, every word of the label would already fit. Bona would be the right tool from the start.

What to use on unsealed grout instead

The answer depends on whether you want to keep mopping or fix the joints for good.

  • For routine mopping, use a bucket and a rinse. Clear water, or a pH-neutral cleaner at the label dilution, then a clear-water rinse and a dry wipe. That is Daltile's rule for glazed tile. Original Fabuloso at pH 7 is one neutral cleaner this site has checked, and its page explains why the rinse still matters.
  • For the long run, seal the grout. Once a joint beads water, Bona is back in its label. Aqua Mix Sealer's Choice Gold (TDS-158) asks owners of sealed grout to "Use an appropriate TileLab® or Aqua Mix® neutral cleaner" and to avoid "cleaners containing ammonia, acids or bleach." Bona is a neutral cleaner with no ammonia or chlorine bleach. Do you need to seal grout? covers when sealing pays off.
  • For joints that are already dark, clean them first. Bona is a light maintenance cleaner, sold "for periodic maintenance" and spot spills. It is not a deep grout cleaner. A brush and a stronger method come first, then the sealer. How to clean grout starts with the gentlest method, and OxiClean on grout covers oxygen bleach for organic stains.

Do not seal over dirty grout. A sealer locks in whatever is in the pores when it goes on.

Epoxy grout and natural stone

Bona's label does not mention epoxy grout. Daltile says epoxy grouts "are chemically cured and acid resistant and, as a result, do not require a sealer." So there is no sealer to add, and this page reads the label's "sealed grout lines" as met by sound epoxy. On epoxy, a pH-neutral spray is a fine routine cleaner. Daltile also says that neither sealer nor "a 100% Epoxy Grout will guarantee against surface buildup," so even epoxy joints need a brush and rinse now and then. Cleaning epoxy grout covers that.

On stone, Bona's label and data sheet name "sealed marble" and "sealed granite." Unsealed stone is excluded by name. Daltile is stricter about stone in general. It says "many of the cleaners acceptable for use on ceramic tile can stain, damage or dull stone," and asks for cleaners "specifically designed for cleaning stone." Bona sells this one for stone, so on sealed stone it is within both rules. Grout for natural stone covers the joints in those floors.

Can you use Bona Hardwood Floor Cleaner on tile?

Use the Hard-Surface cleaner instead. Bona Hardwood Floor Cleaner is a different bottle, made for wood. Its retail copy says it is "Safe for all unwaxed, unoiled, polyurethane finished wood floors." It names no tile. Bona's own US site sorts its cleaners the same way, with wood floor cleaners in one group and hard-surface cleaners for tile in another.

A Bona dealer gives the same answer. Asked in May 2024 whether the Pro Series Hardwood Floor Cleaner works on tile or laminate, Green Building Supply staff wrote: "Bona Pro Series, Stone, Tile & Laminate Cleaner is what you would use for tile or laminate. Not the Hardwood Cleaner."

No source found says the wood cleaner harms tile or grout, so this page does not claim it does. It is simply not labeled for tile. And it is also a spray-and-mop product with no rinse, so on unsealed grout it raises the same absorption question as the tile cleaner.

Bona or not: floor by floor

Bona tile cleaner by floor, from Bona's label and data sheets and the tile and sealer makers' care rules
FloorUse Bona?Why
Glazed ceramic or porcelain, sealed cement groutYesLabel: "ceramic tile with sealed grout lines"; pH 6 to 8, no ammonia or chlorine bleach; TDS-158 asks for a neutral cleaner
Glazed ceramic or porcelain, unsealed cement groutNot until the grout is sealedLabel: unsealed "grout lines may cause staining"; no rinse step; Daltile: seal cement grout "to prevent the color from staining"
Glazed tile, epoxy groutYes, with a periodic brush and rinseDaltile: epoxy does "not require a sealer," but still collects "surface buildup"
Sealed marble, granite or other sealed stoneYesLabel and Pro Series data sheet name sealed marble, sealed granite, other sealed stone
Unsealed travertine, saltillo, quarry or other stoneNoLabel: "unsealed stone ... may cause staining"; bona.com: "no-wax sealed tile" only
Grout already dark or stainedWill not fix itSold "for periodic maintenance"; "not a finish"; clean the joints, then seal
Tile floor, Bona Hardwood Floor CleanerUse the Hard-Surface cleaner insteadHardwood cleaner sold for "polyurethane finished wood floors"; dealer: "Not the Hardwood Cleaner"

Bottom line: Bona Hard-Surface Floor Cleaner is safe on glazed tile with sealed grout and on sealed stone, as its label says. It is pH 6 to 8 on every sheet found, so it cannot dissolve grout. Its warning about unsealed grout is about staining, not damage: the spray is never rinsed, and an unsealed joint soaks up what dries in it. Test the grout with a drop of water. If it darkens, mop with a rinse until the grout is clean and sealed, then switch to Bona.

How to use Bona on a tile floor with grout

  1. Test the grout. Drop water on a joint near the sink or door. If it beads, the grout is sealed. If it darkens within a few minutes, it is not, so use a bucket and rinse for now.
  2. Test the tile if it is stone or unglazed. The same drop on travertine, saltillo or quarry tile tells you whether the tile is sealed. Unsealed stone is outside the label.
  3. Vacuum or sweep first. This is step 1 on Bona's own directions. Grit left on the floor ends up in the pad and then in the joints.
  4. Mist lightly. Bona says "Mist," not soak. A thin film is enough, and puddles run into the joints.
  5. Rinse the pad often. Bona's directions say to "Rinse cleaning pad often to avoid streaking." A dirty pad spreads soil into the joints instead of lifting it.
  6. Brush and rinse the joints now and then. Even sealed grout and epoxy collect buildup, Daltile says. A nylon brush, clear water and a dry wipe take care of it.
  7. Retest the sealer every so often. Penetrating sealers wear out. When the drop test starts to darken the joints, reseal before you go back to Bona. How often to seal grout covers the timing.

Where this answer stops applying

This page covers Bona's tile and stone floor cleaner on the sheets listed: the US Pro Series data sheet (rev 11/17) and safety sheet (2015), the Australian safety sheet (2019), the US Hard-Surface sheet (2022), and the label text in the Publix listing. Bona does not say what its staining warning refers to, so the reason given here comes from its no-rinse directions and the tile makers' rules, not from a test. No source found measures how much any Bona formula darkens unsealed grout, so this page gives no figure. Bona sells other floor products, including the Lemon Mint scent, PowerPlus cleaners and floor polishes, that were not checked here. A polish is a coating, not a cleaner, and follows its own label. Bona Hardwood Floor Cleaner was checked only for what it is sold for; no pH sheet for it was found, so this page states none. Grout younger than its own cure time, recolored grout inside its colorant's cure period, premixed acrylic or urethane grout, and waxed tile follow their makers' care sheets, not this page. Joints that are cracked, sandy or missing need repair, not a cleaner.

Frequently asked questions

Is Bona pH neutral?

Yes. Bona's US site calls the Hard-Surface Floor Cleaner "pH neutral," and its 2022 safety sheet gives pH 6 to 6.5. The Pro Series data sheet gives 7.0 to 8.0, and the 2015 and 2019 sheets give 7.

Why does Bona say not to use it on unsealed grout?

Its label says use on unsealed "grout lines may cause staining." Bona gives no reason. The likely one is that Bona is never rinsed, and unsealed cement grout soaks up the cleaner and the soil it carries before it dries.

Will Bona damage grout?

Not by chemistry. Dissolving cement grout takes an acid, and Bona sits at pH 6 to 8 with no ammonia or bleach. The risk on unsealed grout is a stain, not damage.

How do I know if my grout is sealed?

Drop a little water on a joint. If it beads up, the grout is sealed. If the joint turns darker within a few minutes, it is not sealed, or the sealer has worn out.

Does Bona remove grout stains?

Not deep ones. Bona is sold for routine and spot cleaning, and its dealer calls it "simple a cleaner and not a finish." Dark joints need a brush and a grout cleaning method, then a sealer.

Can I use Bona on travertine?

Only sealed travertine. The label names "sealed marble" and "other sealed stone" and warns that "unsealed stone" may stain. A dealer said yes to unsealed travertine; the label says no.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.