Can You Use Simple Green on Grout?
On this page
- What Simple Green tells you to do on grout
- What is in the bottle
- Does the green dye stain grout?
- Which Simple Green bottle: seven products, seven sheets
- What grout and sealer makers say
- Simple Green or not: grout by grout
- How to clean grout with Simple Green
- Simple Green or Dawn?
- Where this answer stops applying
- Frequently asked questions
- Sources and standards
Yes. Simple Green All-Purpose Cleaner is safe on cement, epoxy and urethane grout at the dilution Simple Green gives for grout: 1 ounce in 1 cup of water, a few minutes on the joint, a soft brush, then a clean-water rinse. Its safety data sheet puts it at pH 8.0 to 10.0, mildly alkaline like Original Dawn, with no acid, bleach or ammonia. The green dye is under 0.1 percent and of a type made to rinse off, so the rinse is what keeps it out of light grout. The Simple Green to keep off colored grout is a different bottle: the Shower, Tub & Tile Cleaner, an acid.
Key takeaways
- Simple Green All-Purpose Cleaner (SDS 13000-25A, October 1, 2025) is pH 8.0 to 10.0 and not classified as hazardous. It is a detergent cleaner, not an acid or a bleach.
- Simple Green's grout method: 1 oz per cup of water, a few minutes, soft brush, damp-cloth rinse, towel dry. Its shower tile page uses it full strength; for grout, follow the diluted method.
- The dye is a "Blend of Polyoxyalkylene Substituted Chromophores (Cyan and Yellow)" at under 0.1 percent. The claim that it stains grout permanently comes from a January 2026 House Digest article that cites no test or source.
- Simple Green Shower, Tub & Tile Cleaner is urea hydrochloride at pH 1.0 to 1.5, and its own label says not to use it on colored grout or stone.
- Want no dye at all? Simple Green Multi-Surface Floor Care and Pro Hard Floor Cleaner are clear liquids at pH 6 to 8.
What Simple Green tells you to do on grout
Simple Green publishes two grout pages, and both say yes. The main one, "How to Clean Grout," says to wet the joints with warm water, then "Mix 1 oz. of Simple Green All-Purpose Cleaner with 1 cup of water," spray one section, "Let the solution sit for a few minutes," scrub with "an old toothbrush or soft-bristled brush," wipe with a damp cloth and towel dry. The bathroom page gives the same dilution and adds a paste of "three parts baking soda to one part Simple Green," left 10 to 15 minutes, for heavy jobs.
Both pages warn against what grout makers warn against. The main page says "chlorine bleach will leach color out of tinted grout," (see faded colored grout), and that acidic cleaners "like vinegar will stain and slowly corrode grout." It also says "We do not recommend using Simple Green with a steam cleaner." And it makes the case for rinsing in its own words: "Dirty water or cleaner residue can settle into the concave grout lines. Once the liquid residue evaporates, it will leave dirt behind."
What is in the bottle
Sunshine Makers, the company behind Simple Green, revised the All-Purpose Cleaner safety data sheet on October 1, 2025 (version 13000-25A), and lists the reason as "Formulation Change." The current sheet gives water above 85 percent, a surfactant under 5 percent, tetrasodium glutamate diacetate (a chelating agent) under 2 percent, sodium bicarbonate under 1 percent, fragrance under 1 percent, and the colorant under 0.1 percent. The pH is 8.0 to 10.0. The product "is not classified as hazardous" under the OSHA 2012 standard.
The formula has changed more than once, which is why old advice conflicts:
| Sheet | 2-butoxyethanol | Colorant | pH |
|---|---|---|---|
| Version 1007 (January 2002) | Under 6% | Not itemized | 9.5 |
| Version 13005-12B (February 2012) | 5% or less | 1% or less | 9.5 ± 0.5 |
| Version 13000-14B (September 13, 2014) | None listed | Under 1% | 8.5 to 9.5 |
| Version 13000-25A (October 1, 2025) | None listed | Under 0.1% (cyan and yellow) | 8.0 to 10.0 |
The solvent 2-butoxyethanol is on the 2012 sheet and gone from the 2014 one. In between, the EPA's NCP Product Schedule lists a "Simple Green 2013 Reformulation" with an original date of July 9, 2013. Warnings about a glycol ether solvent in Simple Green describe the old bottle. None of the four sheets lists an acid or a bleach.
Simple Green's marketing calls the cleaner "pH neutral" on its ready-to-use spray page and its marble shower page. Its safety data sheets do not: the ready-to-use spray (16090-23A, August 1, 2023) is pH 8.2 to 9.2. That is Ultra Dawn Original's territory (pH 9), and below cement grout itself: MAPEI's Keracolor S sheet gives pH 11. Dissolving a cement joint takes an acid, as the grout cleaner pH chart explains.
Does the green dye stain grout?
A House Digest article by Lauren LaMore (January 19, 2026), syndicated on AOL under the title "The Common Cleaning Solution That's Actually Damaging Your Grout," says Simple Green's "bright green color can actually stain your grout" and that "The colorants in Simple Green can seep into porous grout and cause stains that are extremely difficult to remove or, in some cases, permanent." It says staining "is more likely on light-colored grouts." The article cites no test, manufacturer or installer. The AOL copy now returns a 404 error; the House Digest original is live.
The 2025 safety data sheet names it: "Blend of Polyoxyalkylene Substituted Chromophores (Cyan and Yellow)," under 0.1 percent of the concentrate. Diluted 1 ounce to 1 cup, that is under about 0.011 percent in the spray bottle. Poly(oxyalkylene) substituted chromophores are polymeric colorants. Milliken's patent on using them in laundry bars (US 6,417,155, 2002) says they "do not readily react with substrates and are extremely water soluble" and are "easily removed from certain substrates through a simple aqueous rinsing procedure." Milliken markets its Liquitint polymeric colorants for home care as giving "No or low staining of hands, most fabrics and equipment." Simple Green's sheet does not name a supplier, and no one has published a test of any cleaner dye on grout, so the site does not claim Simple Green can never tint a joint.
So the real risk is narrower than the headline. A water-soluble colorant at a fraction of a part per thousand comes out with water. It can only be left behind if the cleaner is left behind: concentrate poured on dry, pale, unsealed grout and allowed to dry in the pores. Daltile's Tile Care & Maintenance guide asks for a clean-water rinse after cleaning "to prevent film formation," and says cement grout "should be sealed after installation to prevent the color from staining." Simple Green's own method dilutes the cleaner and ends with a damp wipe and a towel, so nothing is left drying in the joint. The warning persists because green liquid on white grout looks alarming, and a freshly cleaned joint looks darker while it is wet. The answer to both is the rinse, not a different cleaner.
Which Simple Green bottle: seven products, seven sheets
"Simple Green" is a brand, not one chemistry. The safety data sheets on simplegreen.com cover products from pH 1 to pH 11, and only some are green:
| Product | Main chemistry | Color | pH | On grout |
|---|---|---|---|---|
| All-Purpose Cleaner, concentrate (13000-25A, 2025) | Surfactant, chelant, sodium bicarbonate | Green | 8.0 to 10.0 | Yes, 1 oz per cup, rinsed |
| All-Purpose Cleaner, ready-to-use (16090-23A, 2023) | Ethoxylated alcohol, surfactant, each under 1% | Green | 8.2 to 9.2 | Yes, rinsed |
| Multi-Surface Floor Care (0504032-19A, 2019) | Surfactants, citric and gluconic acid, potassium hydroxide, each under 1% | Clear | 6 to 8 | Yes, dye-free routine choice |
| Pro Hard Floor Cleaner (0505128-24A, 2024) | Surfactants, potassium hydroxide, each under 1% | Clear | 6 to 8 | Yes, no rinse required by label |
| Granite & Stone Daily Cleaner (3703024-20A, 2020) | Surfactants, potassium hydroxide, each under 1% | Light straw | 10.0 to 11.4 | Yes, but not a neutral cleaner |
| Shower, Tub & Tile Cleaner, Pro Grade (1702128-16A, 2016) | Urea hydrochloride, 6% or less | Turquoise | 1.0 to 1.5 | Not on colored grout or stone (label) |
| For comparison: Ultra Dawn Original (P&G, 2017) | Alkyl sulfate surfactants | Blue | 9 (10% solution) | Yes, rinsed |
Two surprises. The Granite & Stone Daily Cleaner page says "pH balanced formula protects stone's seal from eroding," but its sheet gives pH 10.0 to 11.4, more alkaline than the All-Purpose Cleaner. And the Shower, Tub & Tile Cleaner is, in its own sheet's words, a "Concentrated acid based cleaner for the removal of lime, scale, and mineral buildup." Urea hydrochloride is the acid in cement haze removers, the chemistry covered in Zep Grout Cleaner on colored grout. Its page says: "Do not use on mirrors, natural marble, terrazzo, stone, wood, colored grout, enameled particle board, carpeting, fabric, or wallpaper."
What grout and sealer makers say
No grout data sheet names Simple Green. They name chemistries, and the All-Purpose Cleaner fits them. Daltile says "Routine grout cleaning can be done with a daily concentrated household or commercial cleaner," and for glazed tile asks for a "pH neutral liquid cleaner (soapless)" followed by "a clear water rinse." Custom's Polyblend Plus sheet (TDS-360, March 22, 2023) says "Clean with a pH-neutral cleaner." Aqua Mix Sealer's Choice Gold (TDS-158) bans "cleaners containing ammonia, acids or bleach," none of which is in Simple Green, and notes that "high-alkaline" cleaners shorten sealer wear. The Aqua Mix Grout Colorant sheet (TDS-173) says the same for recolored grout and bans direct scrubbing for 20 days. LATICRETE's SPECTRALOCK PRO Premium sheet (DS-681.0-0217) asks for "a neutral pH cleaner" on epoxy grout, and soap and water only on its DAZZLE glow version, which "might discolor from strong alkali cleaners and acids."
So Simple Green at pH 8 to 10 is not strictly neutral, but it is mild and has nothing on the banned list: a sound occasional cleaner for any grout. For daily mopping of sealed or recolored grout, the clear pH 6 to 8 floor cleaners fit the sheets better.
Simple Green or not: grout by grout
| Situation | Simple Green All-Purpose? | Why |
|---|---|---|
| Unsealed white or light cement grout | Yes, diluted, rinsed; spot test first | pH 8-10, no acid; dye is under 0.1% and water soluble, but never let concentrate dry in pale pores |
| Colored cement grout | Yes, diluted and rinsed | No bleach, which Simple Green says leaches color from tinted grout, and no acid |
| Sealed cement grout | Yes, diluted and rinsed | No ammonia, acids or bleach (TDS-158); for daily use a pH 6-8 cleaner is closer to the rule |
| Recolored grout (colorant) | Sparingly, after 20 days | TDS-173: alkaline cleaners affect wear; no direct scrubbing for 20 days |
| Epoxy grout | Yes | Mild alkali; DAZZLE glow grout gets neutral soap and water only |
| Urethane or premixed grout | Yes, diluted and rinsed | Follow the grout's own care section |
| Marble, limestone, travertine tile | Diluted, rinsed and dried | Simple Green's marble page uses 1 oz per 10 oz water; the Marble Institute allows mild detergent but warns of film. See grout for natural stone |
| Hard water scale, cement haze | Little effect | Mineral deposits need an acid; Simple Green points stubborn buildup on non-stone tile to its lime and calcium remover |
| Black mildew spots | Cleans surface growth only | Simple Green's shower page sends mold to d PRO 3 PLUS, an EPA-registered disinfectant |
Bottom line: Simple Green All-Purpose Cleaner is safe on grout at 1 ounce per cup of water, sprayed on pre-wetted joints, left a few minutes, scrubbed with a soft brush and rinsed. On white or light unsealed grout, spot test first and never let the concentrate dry in the joint. Keep the Simple Green Shower, Tub & Tile Cleaner, an acid at pH 1 to 1.5, off colored grout and stone, exactly as its label says.
How to clean grout with Simple Green
- Wet the joints first. Warm water, sprayed or damp-mopped, as both Simple Green grout pages direct.
- Mix 1 oz to 1 cup. All-Purpose Cleaner only. For a whole floor, Simple Green's tile floor page uses 1/2 cup per gallon, 1 1/2 cups for heavy soil; cleaning floor grout covers mopping without leaving dirty water in the joints.
- Spray one section and wait a few minutes. Do not let it dry.
- Scrub along the joint with a soft or medium nylon brush. Simple Green warns that "a steel bristle brush can scratch and damage grout lines."
- Rinse. Clean water and a damp cloth or mop, changing the water often. Simple Green's floor page puts it plainly: "Don't allow dirty water to soak into grout."
- Towel dry and judge the next day. If white grout is still gray once dry, the soil is embedded; cleaning white grout has the oxygen bleach method that comes next.
The baking soda paste on Simple Green's page works mainly as a mild scrub; the site's peroxide and baking soda guide explains why. Rinse it out completely.
Simple Green or Dawn?
For grout they are close cousins: mild alkaline detergents around pH 9, safe on every grout type, and both leave film if not rinsed. Simple Green has the advantage of a measured grout dilution; Dawn on grout has only "a few drops." For a truly neutral option, Original Fabuloso on grout is pH 7. Neither dissolves hard water scale, and neither kills mildew; grout mold and mildew covers that, including when bleach on grout is acceptable.
Where this answer stops applying
It covers Simple Green All-Purpose Cleaner, diluted and rinsed. It does not cover full-strength product left to dry, the acid Shower, Tub & Tile Cleaner, grout younger than the cure time on its own data sheet, or colorant-treated joints in their first 20 days. Not sure whether your grout is sealed? The water drop test tells you in minutes, and unsealed white grout is where the spot test matters most. Grout that is sandy or cracked is not dirty, and no cleaner fixes it.
Frequently asked questions
Will Simple Green discolor white grout?
Not when used as directed. The green dye is under 0.1 percent of the concentrate and is a water-soluble polymeric type designed to rinse off. The staining claim in circulation cites no test. Dilute it, pre-wet the grout, rinse, and spot test first if the grout is pale and unsealed.
Is Simple Green safe on colored grout?
The All-Purpose Cleaner is: it has no bleach, which Simple Green itself says leaches color from tinted grout, and no acid. Simple Green Shower, Tub & Tile Cleaner is not; it is urea hydrochloride at pH 1 to 1.5, and its label says not to use it on colored grout.
Sources and standards
- Simple Green, How to Clean Grout, How to Clean Bathroom Grout, How to Clean Shower Tile, How to Clean a Marble Shower and How to Clean Tile Floors
- Sunshine Makers, Simple Green All-Purpose Cleaner SDS, version 13000-25A (October 1, 2025), and version 13000-14B (September 13, 2014)
- Sunshine Makers, Simple Green All-Purpose Cleaner MSDS 13005-12B (February 2012) and MSDS version 1007 (January 2002)
- Sunshine Makers, safety data sheets for All-Purpose Cleaner (Ready-To-Use) (August 1, 2023), Multi-Surface Floor Care (February 19, 2019), Pro Hard Floor Cleaner (March 26, 2024), Granite & Stone Daily Cleaner (May 1, 2020) and Shower, Tub & Tile Cleaner (August 1, 2016)
- Simple Green product pages: All-Purpose Cleaner, Ready-To-Use All-Purpose Cleaner, Multi-Surface Floor Care, Pro Hard Floor Cleaner, Granite and Stone Cleaner and Pro Grade Shower, Tub & Tile Cleaner
- U.S. EPA, Simple Green 2013 Reformulation, NCP Product Schedule (original date July 9, 2013)
- Lauren LaMore, The Common Cleaning Solution That's Actually Damaging Your Grout, House Digest (January 19, 2026)
- Milliken & Company, US 6,417,155 B1, Laundry bars comprising non-staining water soluble polymeric colorants (2002), and Liquitint Home and Laundry Care
- Dal-Tile Corporation, Tile Care & Maintenance Guide
- Custom Building Products, Polyblend Plus Sanded Grout, TDS-360 (March 22, 2023), Aqua Mix Sealer's Choice Gold, TDS-158 and Aqua Mix Grout Colorant, TDS-173
- LATICRETE, SPECTRALOCK PRO Premium Grout data sheet, DS-681.0-0217
- Marble Institute of America, Easy Care Tips for Natural Stone; Procter & Gamble, Ultra Dawn Original SDS (December 22, 2017); MAPEI, Keracolor S SDS, version 10 (March 26, 2026)
Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.