Can You Use OxiClean on Grout?

CleaningUpdated 9 min readHow we research

On this page
  1. What OxiClean actually is
  2. "OxiClean" on grout means three different products
  3. OxiClean's directions for grout
  4. Where OxiClean sits among the grout makers' own cleaners
  5. Sealed grout: the sealer sheets say no bleach
  6. Recolored grout: keep it off
  7. Use OxiClean or not: grout by grout
  8. Epoxy and urethane grout
  9. The tile beside the joint
  10. How to use OxiClean on grout that qualifies
  11. Why "safe on all grout" and "never use bleach on grout" both circulate
  12. Frequently asked questions
  13. Sources and standards

Yes, on cured cement or epoxy grout that is not sealed or recolored, using the powder, OxiClean Versatile Stain Remover. OxiClean's own grout directions are line 4 on the scoop per gallon of water, 5 to 30 minutes of contact, then a cool water rinse. It is an alkaline oxygen bleach (pH 9 to 11), not an acid, so it does not dissolve cement the way vinegar does. The limits come from sealers, colorants and one OxiClean spray that is really chlorine bleach.

Key takeaways

  • The powder is mostly sodium carbonate (50 to 75 percent) and sodium percarbonate (30 to 50 percent), per Church & Dwight's safety data sheet.
  • For mold, OxiClean's grout page recommends OxiClean + Bleach, whose active is sodium hypochlorite: chlorine bleach.
  • Aqua Mix sealer sheets say "Do not use cleaners containing ammonia, acids or bleach," and Church & Dwight lists OxiClean's percarbonate as "Oxygen bleach."
  • Custom and LATICRETE name a pH-neutral cleaner for routine care. OxiClean is a deep clean, not a weekly mop.
  • Keep it off grout colorant: Aqua Mix says alkaline cleaners shorten the coating's life.

What OxiClean actually is

Church & Dwight's safety data sheet for "OxiClean Stain Remover Powder (All variants)" lists sodium carbonate at 50 to 75 percent by weight, sodium percarbonate at 30 to 50 percent and 1 to 3 percent surfactant, with a pH of 9 to 11 for a 1 percent solution. The current ingredient disclosure (January 26, 2026) names the same actives: sodium carbonate as "Builder" and sodium carbonate peroxide as "Oxygen bleach."

In water the percarbonate releases hydrogen peroxide. The company's commercial brochure describes the pair: "pH-boosting sodium carbonate softens and separates layers of clay and soil," while the "bubbling oxygen bleach helps to break down protein bonds." Cement grout is itself alkaline, so this chemistry does not attack its binder. Acids do, which is why CLR on grout carries a 2-minute limit and OxiClean allows up to 30. Percarbonate against a homemade paste is covered in hydrogen peroxide and baking soda on grout. Borax is often swapped in for OxiClean, but Henkel's sheet for 20 Mule Team Borax lists no peroxide source at all, only sodium tetraborate at pH 9.3, so it cleans without lightening stains; borax on grout has the details.

"OxiClean" on grout means three different products

OxiClean's grout page sends you to three products for three jobs. Only one is the oxygen bleach powder most people mean.

The three products OxiClean recommends for grout and tile, from its stain solutions page and ingredient disclosures
ProductWhat it isOxiClean's job for itContact time givenSurfaces excluded
Versatile Stain Remover (powder)Sodium carbonate and percarbonate, pH 9 to 11Floor tile grout5 to 30 minutesNone named for grout or tile
OxiClean + Bleach Mold & Mildew (foam spray)Sodium hypochlorite with sodium hydroxideMold and mildew in grout lines"Multiple hours or even let sit overnight"Fabric, wood, rubber, painted or papered surfaces
Foam-Tastic (foam spray)Soap scum foamVertical glazed ceramic tileUntil the blue foam turns whiteAcrylic, brass, unsealed granite or marble

The middle row causes the trouble. Its name starts with OxiClean, but its bleach is chlorine, so everything on bleach on grout applies, including fading on colored grout.

OxiClean's directions for grout

Gathered from OxiClean's US and Canadian grout pages and its commercial brochure:

  • Mix: "Fill to OxiClean Versatile Stain Remover line 4 per gallon of water." For grout, "a more concentrated solution/paste may be needed."
  • Water: warm or hot work best; "Do not boil."
  • Wait: "5 to 30 minutes," scrubbing as needed, working "small areas, so solution does not dry on the surface."
  • Rinse: cool water, then blot dry.
  • Use it fresh: "Use solution within 6 hours."

Line 4 is a mark on the tub's scoop, and OxiClean publishes no cup or gram equivalent, so use the scoop. The general ratio in how to clean grout is for plain percarbonate, not this blend.

Where OxiClean sits among the grout makers' own cleaners

No grout maker mentions OxiClean, but they publish the pH of their own cleaners and say which they allow. OxiClean lands in the middle.

Tile and grout cleaners by pH and contact time, from each maker's data sheet
CleanerpHContact timeMaker's position
Aqua Mix Concentrated Stone & Tile Cleaner (TDS-163)7Routine moppingThe kind of cleaner Custom and LATICRETE name for routine care
Aqua Mix NanoScrub (TDS-167)9 to 10No dwell; scrub and rinseCustom allows it on Polyblend Plus haze after 3 days
OxiClean Versatile Stain Remover9 to 11 (1% solution)5 to 30 minutesOxiClean names grout
Dry Treat Oxy-Klenza (oxygen cleaner)About 113 minutesLabeled for grout and all natural stone, marble and limestone included
Aqua Mix Heavy-Duty Tile & Grout Cleaner (TDS-164)11 to 123 to 5 minutes"Regular use of high-alkaline cleaners will reduce sealer life"

OxiClean's 30-minute ceiling is ten times the 3 minutes the stone oxygen cleaner asks for, so stop as soon as the joint comes clean. And the routine cleaner is neutral: Custom's Polyblend (TDS-129), Polyblend Plus (TDS-360) and Prism (TDS-128) sheets all say "Clean with a pH-neutral cleaner," and LATICRETE's care sheet (TDS-1113) reserves alkaline cleaners "for soiling from grease." OxiClean belongs in that occasional slot, as in cleaning white grout.

Sealed grout: the sealer sheets say no bleach

Aqua Mix's Penetrating Sealer (TDS-157), Sealer's Choice Gold (TDS-158) and Grout Sealer (TDS-159) sheets each say: "Do not use cleaners containing ammonia, acids or bleach. Use an appropriate TileLab or Aqua Mix neutral cleaner." They do not separate chlorine from oxygen bleach, and Church & Dwight calls OxiClean's percarbonate "Oxygen bleach," so read literally, OxiClean is excluded. Custom names Sealer's Choice Gold on its Polyblend and Prism sheets, so many sealed cement joints carry exactly this sealer.

That leaves two cases. If you want to keep the sealer, use a neutral cleaner. If the grout is dirty enough that you would reseal anyway, OxiClean is a fair deep clean: let it dry a day, run a water drop test, and reseal any joint that darkens, per how to seal grout.

Recolored grout: keep it off

A colorant is a coating. Aqua Mix Grout Colorant (TDS-173) is "a professional grade waterborne epoxy" with expected wear up to 15 years, but "high-alkaline, acidic or solvent-based cleaners will affect wear," and Aqua Mix's own heavy-duty alkaline cleaner "may adversely affect grout joints that have been coated with colorant," its sheet says. Use a neutral cleaner and a soft tool, and nothing scrubbed for the first 20 days. More in grout colorant.

Use OxiClean or not: grout by grout

OxiClean Versatile Stain Remover on grout: what the product directions and the grout and sealer data sheets allow
GroutUse OxiClean?WhyEarliest after installing
Cement grout, unsealedYes, as a deep cleanAlkaline cleaners do not dissolve cement3 days, the earliest Custom allows a pH 9 to 10 cleaner on Polyblend Plus
Cement grout, sealedOnly if you will resealAqua Mix sealer sheets exclude cleaners containing bleachNot applicable
Grout with a colorant coatingNoAlkaline cleaners shorten colorant lifeNo scrubbing for 20 days after recoloring
Cured epoxy groutYesLATICRETE rates 45% potassium hydroxide "R" for 7 daysAfter the epoxy's full cure
Urethane or single-component groutTest firstFusion Pro's sheet names a neutral cleaner only7 days, when Fusion Pro may first take intermittent water
Cracked or crumbling groutNoScrubbing removes more of a weak jointRepair first

The 3-day line is a floor, not a reason. New grout should not need OxiClean; a film after installation is haze, covered in how to remove grout haze.

Epoxy and urethane grout

LATICRETE's SPECTRALOCK PRO Premium sheet (DS-681.0-0217) rates 45 percent potassium hydroxide "R" for 30 minutes, 24 hours and 7 days, an alkali far stronger than dilute OxiClean. For 5 percent sodium hypochlorite it gives R at 30 minutes and 24 hours and NR at 7 days. Church & Dwight does not publish the mold spray's bleach strength, but at the tested 5 percent, overnight contact sits inside the 24-hour rating. Soil sits on top of epoxy anyway; see cleaning epoxy grout.

Urethane and acrylic single-component grouts are the gap. Custom's Fusion Pro sheet (TDS-242) says "Clean with a neutral cleaner" and nothing about alkaline ones. We found no data either way, so test a hidden joint and let it dry a day before doing the floor.

The tile beside the joint

OxiClean's powder directions name "floor tiles" and say nothing about natural stone, while its Foam-Tastic excludes "unsealed granite or marble." A stone-labeled oxygen cleaner exists: Dry Treat's Oxy-Klenza sheet covers "all natural stone (including acid sensitive, calcite based stones such as marble and limestone)" with 3 minutes of contact after a test patch. On stone, use the product labeled for it; see grout for natural stone. Glazed ceramic and porcelain are what OxiClean's directions assume.

Bottom line: OxiClean Versatile Stain Remover is a sound deep cleaner for cured, unsealed cement grout and for epoxy: line 4 per gallon of warm water, as little of the 5 to 30 minutes as the stain needs, and a thorough rinse. Use a neutral cleaner on sealed grout you want to keep sealed, on recolored grout and for routine cleaning. Treat the OxiClean mold spray as chlorine bleach, because it is.

How to use OxiClean on grout that qualifies

  1. Check the grout. Drop-test for sealer and look for a colorant coating.
  2. Mix in an open bucket. Line 4 per gallon of warm water, stirred until dissolved. Never cap it: Dry Treat warns a sealed container of a similar mix "may rapidly expand and rupture."
  3. Dampen the joints. LATICRETE dampens grout before its alkaline cleaner, and Custom pre-wets before NanoScrub.
  4. Apply and watch. Check at 5 minutes and stop when the joint lightens. Never let it dry on.
  5. Scrub along the joint. Stiff nylon brush or white nylon pad, never wire.
  6. Pick up and rinse twice. Wet-vacuum or sponge the dirty solution, then rinse. Dried carbonate leaves a white film, worst on dark grout.
  7. Judge it dry. Wait several hours before a second round.

The safety data sheet warns the powder "can emit toxic fumes if mixed with products containing chlorine." Wear gloves and eye protection, and rinse fully before using the mold spray. White bloom that returns after cleaning is a different problem: see grout turning white.

Why "safe on all grout" and "never use bleach on grout" both circulate

OxiClean lists grout and the powder has no chlorine, so "OxiClean is safe on colored grout" spreads as a rule for every grout. Sealer sheets say no bleach, so "never use OxiClean on grout" spreads too. Both skip what decides it: the powder and the mold spray are different chemistry, the sealer rule is about keeping a sealer, and on colorant the alkalinity is the problem.

Frequently asked questions

Will OxiClean remove grout sealer?

It can shorten its life. Aqua Mix sealer sheets exclude bleach cleaners and say high-alkaline cleaners affect wear. Drop-test once dry and reseal joints that darken.

Can I use OxiClean on colored grout?

The powder, on unsealed and uncoated colored cement grout, after a hidden-joint test. Not the OxiClean + Bleach spray, which is chlorine bleach.

How long should OxiClean sit on grout?

OxiClean gives 5 to 30 minutes, kept wet. Start checking at 5.

Is OxiClean better than vinegar for grout?

For cement grout, yes: vinegar is an acid that dissolves cement paste, OxiClean is alkaline. See vinegar on grout.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.