Can You Use RMR-86 on Grout?

CleaningUpdated 16 min readHow we research

On this page
  1. What RMR-86 is
  2. What RMR says about grout
  3. Does RMR-86 kill mold? What RMR says
  4. What is in the bottle: four safety data sheets
  5. How strong is RMR-86 next to the grout?
  6. Can you use RMR-86 on colored grout?
  7. Why the black spots come back
  8. A worked case: one shower, two grout colors
  9. Grout by grout: where the makers draw the lines
  10. RMR-86 or not: grout by grout
  11. How to use RMR-86 on grout
  12. RMR-86, Tilex or plain bleach?
  13. Where this answer stops applying
  14. Frequently asked questions
  15. Sources and standards

Yes, on white or light cement grout. RMR-86 is chlorine bleach in a spray, and its maker lists "grout lines" and "tile and grout" among the places to use it. The directions are short: spray from 6 to 8 inches, wait at least 15 seconds, and rinse once the stains are gone. But RMR-86 is a stain remover, not a mold killer, and its maker says so because the product has no EPA registration. The black spots fade, but the mold can grow back. On colored, sealed or recolored grout, the grout and sealer makers' rules on bleach apply.

Key takeaways

  • RMR-86 is sodium hypochlorite, the chemical in chlorine bleach. The current safety data sheet (June 9, 2026) lists 1 to 5 percent and pH 11.37, where the 2020 sheet listed 4 to 6 percent and pH 13.0.
  • RMR Solutions names grout lines and tile and grout as safe surfaces. Spray, wait at least 15 seconds, and rinse well once the stains disappear.
  • It removes the color mold leaves behind. RMR says it cannot claim RMR-86 kills mold because it has no EPA registration number, and an EPA product search finds no RMR-86.
  • RMR is silent on grout color. TEC says no bleach on its grout as a routine, and Simple Green says bleach leaches color from tinted grout. On colored grout, test a hidden joint first, or use oxygen bleach.
  • Keep it off recolored grout, stone and metal, and use it only now and then on sealed grout. Skip RMR-86 Pro at home: it is up to 10 percent bleach and sold "For industrial use."

What RMR-86 is

RMR-86 is a ready-to-use spray made by RMR Solutions of Brighton, Michigan, and the bottle says RMR-86 Instant Mold & Mildew Stain Remover. Its safety sheet calls it RMR-86 Mold Stain & Mildew Stain Remover, and gives its use as "Mold stain and mildew stain remover."

The working part is sodium hypochlorite, the chemical in household chlorine bleach. Bleach is an oxidizer: it breaks down the colored parts of mold and mildew, so dark spots turn pale or vanish. RMR's ingredient list adds water, sodium carbonate, a silicate, sodium hydroxide and an ingredient listed as Dowfax, but gives no amounts for them.

Two more terms decide the answer. A stain remover takes away the color a stain leaves. A mold killer, in the US, is a pesticide, and to claim it kills mold a product needs an EPA registration number on its label. RMR-86 has none, and RMR says that is why it makes no kill claim. Tilex Mold & Mildew Remover, by contrast, carries EPA number 5813-24 and a grout kill direction.

Cement grout is the common sanded or unsanded grout mixed with water. It is porous, with tiny holes that soak up water and whatever is in it, while glazed tile is not. Colored grout here means cement grout with pigment in it, from tan to charcoal. The general case for bleach on grout is on the bleach on grout page, so this one sticks to RMR-86.

What RMR says about grout

RMR's product page lists the places to use it: it "instantly targets deeply embedded stains that linger between bathroom tiles, in grout lines, under the sink, and on shower doors." The long description adds "tile & grout." RMR's FAQ answers the safe-surface question the same way: "RMR-86 is ideal for wood, decks, railings, concrete, outdoor furniture, drywall, siding, tile and grout, fiberglass, vinyl, counters, tubs, toilets, shower doors."

The directions on the product page are four steps:

  • Shake the bottle well before use.
  • Spray from 6 to 8 inches until the surface is thoroughly covered.
  • Allow it to penetrate for at least 15 seconds.
  • Rinse well once the stains have visibly disappeared.

RMR says not to dilute it: "If diluted the product may not be as effective." Its FAQ gives the coverage as about 60 square feet for a 32 ounce bottle and 200 to 400 square feet for a gallon.

RMR also lists what it harms. The product page says, "RMR-86 should not be used on any metals or fabrics. This solution is corrosive in nature and does have a bleaching effect on fabrics and upholsteries." The FAQ names "ductwork, copper, metal, mechanicals, nail plates, steel, aluminum," and if it lands on them, "quickly wash area with soap and water." Nothing on RMR's product page or FAQ mentions grout color, sealed grout, epoxy grout or stone tile.

Does RMR-86 kill mold? What RMR says

This is the question behind most searches, and two answers circulate. Reviews on RMR's own product page say it "wipes out mold and mildew in seconds," but RMR's own answer is narrower.

On the product page, RMR answers it in one line: "No, this product does not kill mold, it only removes the stains caused by mold and mildew." The main FAQ explains why: "RMR Solutions is unable to state that this product actually kills mold due to not having an EPA registration number." It then adds that contractors have told RMR the product "did in fact kill the mold spores," which is a report from customers, not a test RMR has filed.

EPA's product label search bears this out: a name search for "RMR-86" on November 16, 2026, returned no products. The same search for "RMR-141" returned two active registrations, RMR-141 and RMR-141 RTU. So RMR does register the products it sells as disinfectants, and RMR-86 is not one of them.

So here is the ruling. Bleach takes the stain away, and that is what RMR-86 is sold to do, so treat it as a stain remover. If you want a product with a registered kill claim on grout, Tilex Mold & Mildew Remover has one. Its EPA label says, "TO KILL MOLD & MILDEW ON HARD, POROUS SURFACES such as grout and cement: Spray surface until thoroughly wet, let stand 10 minutes, and rinse." RMR-86's 15 seconds is a stain step, not a kill step, and Tilex on grout covers that label in full.

What is in the bottle: four safety data sheets

A safety data sheet (SDS) is the maker's legal record of a product. Section 3 lists the hazardous ingredients and Section 9 gives the pH. RMR-86 has had at least three, RMR-86 Pro has its own, and they do not agree.

RMR-86 and RMR-86 Pro on RMR Solutions' own sheets
Sheet (date)Sodium hypochloriteOther listedpHHazard class
RMR-86, revision 1 (December 1, 2016)3-7%Surfactants 8-9%About 8-9Skin corrosion 1, eye damage 1
RMR-86, SDS RMR-001 version 1 (issued February 14, 2020, revised February 17, 2020)4-6%None13.0Danger: skin corrosion 1C, eye damage 1
RMR-86, SDS RMR-001 version 4 (revised June 9, 2026)1-5%None11.37Warning: skin irritation 2, eye irritation 2
RMR-86 Pro, SDS RMR-012 version 2 (revised January 25, 2023)5-10%Sodium hydroxide under 1%11.01 (10% solution)Skin irritation 2, eye damage 1

Every sheet lists bleach, and what changed is how much and how strong the mix is. The 2016 sheet called it a "viscous liquid," clear and pale yellow, with a bleach odor. The 2020 and 2026 sheets call it a clear yellow liquid with a "Chlorine Bleach" odor.

The sheets do not say when each version reached the shelf, and a bottle does not show its SDS date. So treat any bottle as the stronger version: wear gloves and eye protection, and keep air moving.

The sheets warn about mixing, too. The 2020 sheet says, "Contact with acids liberates toxic gas." The 2016 sheet names the products to keep apart: "toilet bowl cleaners, acids or products containing ammonia." So rinse the grout with clean water before and after RMR-86, and never use it right after vinegar or an acid cleaner.

How strong is RMR-86 next to the grout?

On the pH scale, 7 is neutral, below 7 is acid, like vinegar, and above 7 is alkaline, like ammonia or lye. Each whole step is ten times stronger than the one before.

Cement grout is alkaline itself. MAPEI's sheet for Keracolor S sanded grout (version 10, March 26, 2026) gives pH 11.00 at a 10 percent mix in water and says, "Cement gives a strong alkaline reaction with water." The June 2026 RMR-86 sheet, at 11.37, is about 2.3 times as alkaline as that. The 2020 sheet, at 13.0, was 100 times, and Tilex sits between them at 12.4 to 12.8.

So the risk to grout from RMR-86 is not the kind acid brings, and the makers' warnings point to color, sealer and colorant, and to routine use. The grout cleaner pH chart places RMR-86 beside the other bathroom cleaners.

Can you use RMR-86 on colored grout?

RMR does not say. Its pages warn that RMR-86 bleaches fabric and carpet, but say nothing about grout color either way, and no grout maker has published a fade test for it. What the makers do say about bleach points one way.

  • A grout maker. TEC's Power Grout care bulletin (November 2025): "Do not use vinegar, bleach, ammonia or other general purpose cleaning products ... Using these routinely can degrade the grout." The key word there is "routinely."
  • A cleaner maker. Simple Green's grout page: "chlorine bleach will leach color out of tinted grout."
  • A sealer maker. Aqua Mix Sealer's Choice Gold (TDS-158): "Do not use cleaners containing ammonia, acids or bleach."
  • A colorant maker. Aqua Mix Grout Colorant (TDS-173): "high-alkaline, acidic or solvent-based cleaners will affect wear."

So here is the ruling. RMR's "safe on tile and grout" is about the surface not being harmed, and it says nothing about color. On colored grout, RMR-86 is a spot tool for a stain nothing gentler will shift. Test a hidden joint first, spray the whole area evenly, and rinse, but for routine stain work on color, start with oxygen bleach. OxiClean on grout and peroxide and baking soda cover how. If the color has already gone patchy, see fading grout.

Why the black spots come back

RMR's FAQ is plain about it: "Mold can certainly grow back after using any type of mold product out there." It names the cause, too, saying "if there is humidity relatively above 50% or any kind of moisture on a substrate, mold can grow." Its advice is to remove the stains and "fix the moisture problem."

Grout makes that hard. Cement grout is porous, so it stays damp long after the tile face is dry, and soap film and skin oils in its rough surface feed mildew. Bleach takes the color out at the surface, but it does not dry the joint. The Tilex label, for a product with a kill claim, still warns that it "may not be able to remove mildew embedded in hard water deposits, old grout or silicone caulking."

If stains come back within days, look for water, not a stronger spray. A joint that stays wet, a cracked corner or a failed seal behind the tile will keep feeding it. Grout mold and mildew covers how to tell surface mildew from a moisture problem, and Grout porosity and absorption explains why grout holds water.

A worked case: one shower, two grout colors

Take a common shower. The walls are white glazed tile with white cement grout, and the floor is gray porcelain mosaic, about 3 by 4 feet, with charcoal cement grout. Neither grout has been sealed, and black mildew spots sit along the bottom wall joints and in the floor corners. There is a chrome drain and an aluminum trim strip at the edge of a niche.

Start with the white wall grout: RMR names grout lines, and color is not a question. Open a window, run the fan, and rinse off any other cleaner first. Shake the bottle and spray from 6 to 8 inches. Wait at least 15 seconds, and longer until the stains fade, then rinse the joints well with clean water.

Now the charcoal floor, which is where color can change, so test first. Pick a joint behind the door, spray it, wait until the stain fades, rinse, and let it dry overnight. Dark grout looks darker when wet, so judge it only dry. If it matches, treat the floor corners the same way: spray every joint in the area, not just the black spots, and rinse it all at once. If the test joint came up lighter, stop and use oxygen bleach.

How much will it take? The floor is 12 square feet, so at RMR's figure of about 60 square feet for a 32 ounce bottle, that is about a fifth of a bottle.

Then the metal. RMR says RMR-86 corrodes metal and aluminum, so wipe any spray off the drain and the trim at once, and wash them with soap and water.

Suppose the spots return a week later in the same floor corners. That points to water staying in those joints, and it is not a reason to spray more often.

Change one fact and the answer shifts. If the floor grout were sealed, the Aqua Mix rule applies: no bleach as a routine, and a water drop test after any spot use. If it were recolored, skip RMR-86 on it. If it were epoxy, plain RMR-86 is fine for a short, rinsed spot clean, but not the Pro.

Grout by grout: where the makers draw the lines

White or light cement grout, unsealed. Yes, since RMR names grout lines and tile and grout. Spray, wait at least 15 seconds until the stains go, then rinse.

Colored cement grout, unsealed. Spot use only, after a hidden test. TEC bans bleach as a routine cleaner and Simple Green says it leaches color from tinted grout, so reach for oxygen bleach first.

Sealed cement grout. Not as a routine, because Aqua Mix says no bleach on its sealer. RMR's own FAQ says, of sealed wood, that RMR-86 "could potentially remove the sealant as well," and tells you to test a small area. After any spot use, do a water drop test, and see how often to seal grout.

Recolored grout. Keep it off, since TDS-173 says high-alkaline cleaners affect colorant wear, and RMR-86 is a high-alkaline bleach. See grout colorant.

Epoxy grout. Yes for a short, rinsed spot clean with regular RMR-86. LATICRETE's chart for SPECTRALOCK PRO Premium (DS-681.0-0217) rates 5 percent sodium hypochlorite "R," recommended, at 30 minutes and 24 hours, and "NR," not recommended, at 7 days. The June 2026 sheet puts regular RMR-86 at 1 to 5 percent, inside what the chart tested, and you rinse it off within minutes. Older sheets ran up to 6 and 7 percent, so keep any spot clean short. RMR-86 Pro is 5 to 10 percent, above what the chart tested, so the chart does not clear it. More in cleaning epoxy grout.

Natural stone tile. Not covered, since RMR names no stone, marble, limestone or travertine. See grout for natural stone.

Joints beside metal. Keep spray off drains, trim and fixtures, and wash off any that lands, since RMR names copper, steel and aluminum. Grout or caulk at metal trim covers those joints.

RMR-86 or not: grout by grout

RMR-86 on grout, from RMR Solutions' pages and sheets and the grout, sealer and epoxy makers' rules above
Grout and jobUse RMR-86?Why
White or light cement grout, mildew stainsYes: spray, at least 15 seconds, rinseRMR product page: "grout lines"; FAQ: "tile and grout"
Colored cement grout, unsealedSpot use after a hidden-joint test; oxygen bleach firstTEC: no bleach "routinely"; Simple Green: bleach leaches color; RMR silent on color
Sealed cement groutNot routine; water drop test after spot useAqua Mix TDS-158: "Do not use cleaners containing ... bleach"; RMR FAQ: may remove sealant
Recolored grout (colorant)NoAqua Mix TDS-173: high-alkaline cleaners "will affect wear"
Epoxy groutRegular RMR-86 for spots, rinsed; not the ProLATICRETE DS-681.0-0217: 5% hypochlorite R at 24 h, NR at 7 days; Pro is 5-10%
Natural stone tileNot coveredRMR names no stone
Joints beside metal drains or trimKeep spray off; wash with soap and waterRMR FAQ: corrosive to copper, steel, aluminum
Mold that keeps coming backFix the moisture; RMR-86 only removes the stainRMR FAQ: no kill claim without EPA registration; grows back with moisture

Bottom line: RMR-86 is a bleach spray, and its maker names grout lines. On white cement grout, spray it, wait at least 15 seconds until the stains go, and rinse. It removes mold stains but carries no kill claim, so fix the moisture or the spots return. On colored grout, test a hidden joint or use oxygen bleach. Keep it off recolored grout, sealed grout as a habit, stone and metal, and leave RMR-86 Pro to the trade.

How to use RMR-86 on grout

  1. Check the grout. White cement or epoxy: go ahead. Colored: test a hidden joint first. Recolored grout or stone tile: stop.
  2. Rinse off other cleaners with clean water first, above all any acid, vinegar or toilet bowl cleaner.
  3. Get air moving and cover up. Open a window and run the fan. RMR recommends full protective gear for this product, meaning a full face respirator, a chemical suit and gloves, so at the least wear gloves and eye protection.
  4. Shake the bottle well, and do not dilute it.
  5. Spray from 6 to 8 inches until the joints are covered, and keep it off metal or wipe it off at once.
  6. Wait at least 15 seconds, until the stains visibly fade.
  7. Rinse well with clean water, since grout is porous and you do not want bleach drying in it.
  8. Dry the shower. Run the fan after every shower, since moisture is what brings mold back.

RMR says RMR-86 keeps its strength for "a minimum of 6 months" when stored well, then "will break down slowly," so an old bottle that seems to do nothing may simply be spent.

RMR-86, Tilex or plain bleach?

All three are chlorine bleach, and the difference is the claim on the label. Tilex Mold & Mildew Remover is 2.4 percent bleach on its EPA label and sets 10 minutes on grout to kill mold and mildew. RMR-86 has no EPA label, so it makes only a stain claim, and its directions are built around 15 seconds. Plain bleach is mixed in a bucket, which bleach on grout covers, and none of the three is a routine grout cleaner by TEC's rule. If you want a bleach cream you can rub into a joint, Soft Scrub is the one to compare.

Where this answer stops applying

This page covers RMR-86 on its 2016, 2020 and 2026 safety data sheets, and RMR's product page and FAQ as read in November 2026, and RMR-86 Pro only on its 2023 sheet. It does not rule on RMR's other products, such as RMR-141 or the marine RMR-86M. No source found measures how much color or sealer one RMR-86 treatment removes, so this page gives no figure. It does not rule on premixed acrylic or urethane grout, or on grout younger than its cure time; their makers' care sheets govern. Grout that is soft, sandy or cracked has a cause other than mildew, and bleach will not fix it. A musty smell with little to see can mean mold behind the tile, which no spray reaches. The breathing and skin warnings apply on any surface: use it only with fresh air moving through the room.

Frequently asked questions

Is RMR-86 safe on grout?

Yes on cement and epoxy grout, sprayed, left at least 15 seconds and rinsed, since RMR lists grout lines and tile and grout as safe surfaces. Keep it off recolored grout, and use it only now and then on sealed grout.

Does RMR-86 kill mold in grout?

RMR does not claim it does. Its FAQ says it cannot state that RMR-86 kills mold, because the product has no EPA registration number, so it removes the stains only. If you want a kill claim for grout, Tilex Mold & Mildew Remover has one: 10 minutes, then rinse.

Will RMR-86 bleach colored grout?

RMR does not say, and no maker has published a test, but Simple Green says chlorine bleach leaches color from tinted grout, and TEC says not to use bleach on its grout as a routine. Test a hidden joint, and use oxygen bleach for routine stain work.

How long should RMR-86 sit on grout?

RMR says at least 15 seconds, and to rinse well once the stains have visibly gone. There is no longer kill time, because there is no kill claim.

What is in RMR-86?

Sodium hypochlorite, the chemical in chlorine bleach. The June 2026 sheet lists 1 to 5 percent and pH 11.37. RMR's ingredient list adds water, sodium carbonate, a silicate, sodium hydroxide and Dowfax.

Why does mold come back after RMR-86?

Because it removes the stain, not the moisture. RMR says mold can grow wherever humidity runs above about 50 percent or a surface stays damp. Grout holds water, so dry the shower after each use and fix any joint that stays wet.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.