Can You Use Soft Scrub on Grout?

CleaningUpdated 18 min readHow we research

On this page
  1. What Soft Scrub is
  2. What the Soft Scrub label says about grout
  3. How the label wording changed
  4. The Soft Scrub lineup: bleach, grit, or both
  5. Will the grit scratch tile, grout or stone?
  6. Can you use Soft Scrub on colored grout?
  7. A worked case: one bathroom, three surfaces
  8. Grout by grout: where the makers draw the lines
  9. Soft Scrub or not: grout by grout
  10. How to use Soft Scrub on grout
  11. Soft Scrub, Comet or Tilex?
  12. Where this answer stops applying
  13. Frequently asked questions
  14. Sources and standards

Yes, on white or light cement grout between glazed tile. Soft Scrub with Bleach is a cream with a fine limestone grit and 1.1 percent bleach, so rub it on, leave it no more than 5 minutes on mildew stains, and rinse. Its EPA label names "sealed grout," never bare grout. Keep it off colored grout as a habit, off recolored grout, and off marble, which is no harder than the grit.

Key takeaways

  • Soft Scrub with Bleach is chlorine bleach in a gritty cream: 1.1 percent sodium hypochlorite on the label, with limestone at 30 to 60 percent and pH 12.7 on Henkel's safety sheets.
  • The label's grout wording is "Whitens sealed grout" and, since February 2025, "sealed grout" on its list of hard, nonporous surfaces. Unsealed grout is never named as a surface.
  • For mildew stains the label says leave it on 5 minutes, then rinse or wipe clean. It does not claim to kill mold inside porous grout.
  • The grit is calcium carbonate, 3 on the Mohs scale, which Soft Scrub says is softer than granite and glass. Marble is made of the same mineral, so the grit is no softer than the stone.
  • Soft Scrub Lemon has the grit but no bleach, at pH 10.2 to 10.8, while the Gel with Bleach has bleach and lye but no grit.

What Soft Scrub is

Soft Scrub is a brand of cream cleansers sold by Henkel, which took over the registration from Clorox in January 2005, per the EPA record. When people ask about Soft Scrub on grout, they usually mean the white bottle, Soft Scrub with Bleach Cleanser, and that is the main product this page rules on.

A cream cleanser is a thick liquid with a fine grit mixed in. The grit is the abrasive: tiny hard grains that scrub soil off as you rub. In Soft Scrub the grit is ground limestone, which is calcium carbonate. The bleach is sodium hypochlorite, the same chemical as in liquid chlorine bleach, and it breaks down the dark color of mildew so the spots fade.

Three grout terms decide the answer. Cement grout is the common sanded or unsanded grout mixed with water. It is porous, full of tiny holes that soak up water and whatever is in it. Glazed tile is nonporous, so cleaner sits on top of it. Colored grout means cement grout with pigment in it, from tan to charcoal. Sealed grout has had a clear sealer soaked into it to slow down stains.

That gives Soft Scrub two ways to change a joint: the bleach can lift color along with the stain, and the grit can wear the surface a little each time you scrub. The rest of this page sorts grout by which of those two risks matters.

What the Soft Scrub label says about grout

A cleaner that claims to kill germs is sold as a pesticide in the US, so its label has to be accepted by the Environmental Protection Agency (EPA), which posts each version. Soft Scrub with Bleach is EPA Reg. No. 64240-44, and every version from 2003 to 2025 lists one active ingredient: sodium hypochlorite, 1.1 percent.

The current label, a notification EPA accepted on February 20, 2025, gives these directions:

  • To clean: "Squeeze directly onto [tough stains] [surface] or onto (a) damp sponge. Rub ... Rinse or wipe clean."
  • Mildew stains: "To remove stains caused by mold and mildew: Leave on 5 minutes. Rinse or wipe clean."
  • Germs: "To disinfect hard nonporous surfaces: Apply at full strength and leave on 3 minutes."
  • Where: "For use on sinks, tubs, showers, glazed tile, counters, toilets. Prolonged contact on delicate surfaces may cause discoloration. Rinse promptly after standing time."
  • Soft surfaces: on surfaces "that may scratch, like plastic, appliance enamel, sealed fiberglass, sealed cultured marble, and sealed natural stone: Use sparingly; rub gently with a damp sponge, rinse."
  • Banned: "Do not use on copper, brass, silver, aluminum, wood, painted surfaces, or rubber items." For unfamiliar surfaces, "test in a small, inconspicuous area first."

Grout shows up three times, and only in optional claims the maker may print. "Grout" is on a list of things the cream "removes" or "cleans away." "Whitens sealed grout [in bathtubs, showers, floors and walls]" is on every version from April 2018 on. And the 2025 version adds "Sealed grout" to its list of "Hard, Nonporous Surfaces for Disinfecting and Cleaning," with the claim "Cleans & Disinfects [tubs, sinks, toilets, sealed grout & glass]."

So the label treats sealed grout as a hard, nonporous surface and says nothing about bare grout as a surface at all. Its 3-minute germ-kill time covers sealed grout from 2025 on, but not unsealed grout.

How the label wording changed

The older labels on file show the rules getting tighter, not looser, which matters because many pages still repeat the old wording.

  • April 2003 (Clorox, Reg. No. 5813-25). "For use on sinks, counters, tile, tubs, toilets." Mildew line: "To remove mold and mildew: Leave on five minutes."
  • March 2010 (Henkel's unit, Reg. No. 64240-44). "For use on sinks, tubs, showers, tile, counters, toilets." Soft surfaces included plain "natural stone."
  • By April 2018. "Tile" became "glazed tile." "Natural stone" became "sealed natural stone," along with sealed fiberglass and sealed cultured marble.
  • By November 2022. "To remove mold and mildew" became "To remove stains caused by mold and mildew." The claim now covers the stain, not the growth.
  • February 2025. "Sealed grout" joined the list of hard, nonporous surfaces.

The 5-minute time has not changed since 2003, but what it promises has: on grout, Soft Scrub is a stain remover, not a mold killer. For a label that does claim to kill mold in grout, see Tilex on grout, which sets 10 minutes for "grout and cement."

The Soft Scrub lineup: bleach, grit, or both

A safety data sheet (SDS) is the maker's legal record of a product. Section 3 lists the hazardous ingredients and Section 9 gives the pH. On the pH scale, 7 is neutral, below 7 is acid, and above 7 is alkaline, like soda ash or lye, and each whole step is ten times stronger than the one before.

Soft Scrub cleansers on their own sheets and labels
Product (document, date)Listed ingredientspHBleach?Grit?
Soft Scrub with Bleach Cleanser, EPA label 64240-44 (February 20, 2025)Sodium hypochlorite 1.1%Not on labelYesYes: "Mild Abrasive"
Same product, SDS rev. 001.6 (September 24, 2018)Limestone 30-60%, boehmite 1-5%, sodium alkane sulfonate 1-5%, sodium hypochlorite 1-5%12.7YesYes
Same product, SDS rev. 001.1 (July 24, 2017)Same four ingredients, same ranges12.7YesYes
Soft Scrub Gel with Bleach, SDS rev. 005.0 (April 20, 2015)Sodium hypochlorite 1-5%, sodium hydroxide 1-5%, dodecyldimethylamine oxide 1-5%"Not available"YesNo: "non-abrasive formula"
Soft Scrub with Lemon (and with Baking Soda), MSDS D-122 rev. 8 (May 15, 2012)Calcium carbonate 30-60%, sodium alkylbenzenesulfonate 1-5%, lauramine oxide 1-5%10.2-10.8NoYes
Soft Scrub Total with Bleach, SDS D-128 rev. 004.0 (April 20, 2015)Sodium hypochlorite 1-5%; a clear liquid12.0-13.0YesNo

In plain words, the bleach cream is mostly limestone grit with a little bleach: the sheets give a range of 1 to 5 percent, and the EPA label pins it at 1.1. Boehmite is an aluminum mineral, written Al(OH)O on the sheet, and the sulfonate is the soap-like part that lifts grease. The Gel swaps the grit for sodium hydroxide, which is lye, plus an amine oxide detergent, and its maker calls it non-abrasive. The Lemon cream keeps the grit and drops the bleach. Its sheet says it is labeled under Consumer Product Safety Commission rules and lists no EPA registration, so it makes no germ claim.

Next to grout, the bleach cream is strong. MAPEI's sheet for Keracolor S sanded grout (version 10, March 26, 2026) gives pH 11.00 for the grout itself. Soft Scrub with Bleach at 12.7 is 1.7 steps higher, about 50 times as alkaline. That does not dissolve cement the way acid does, so the risk is to what sits on the cement: color, sealer and colorant. Soft Scrub Lemon, at 10.2 to 10.8, is a little milder than the grout. The grout cleaner pH chart places Soft Scrub beside the other common cleaners.

Will the grit scratch tile, grout or stone?

Soft Scrub answers this in its own FAQ: the grit "is Calcium Carbonate," with "a hardness rating of only 3 on Moh's Hardness Scale." So it "is therefore softer than many common household cleaning surfaces such as granite, glass and stainless steel. That is why it is safe to use on those types of surfaces."

The Mohs scale ranks minerals from 1 (talc) to 10 (diamond) by which one scratches which, and a harder grain scratches a softer surface. Geology.com puts calcite at 3 and glass at 4 to 7, so the maker's logic holds for glass and for glass tile.

It does not hold for marble. Marble "is composed primarily of the mineral calcite," per geology.com, so the grit and the stone have the same hardness. The label, for its part, limits stone to "sealed natural stone" and says "Use sparingly; rub gently." Soft Scrub's own marble page recommends a different product, not the bleach cream, while its granite page names both the bleach cream and the Gel. Grout for marble explains why calcite stone scratches and etches so easily.

Grout is the case the FAQ does not cover. No Soft Scrub document says how hard grout is, and no source found measures what one scrub wears off a joint, so the makers who speak are tile and grout makers. LATICRETE's care sheet (TDS-1113) says "Powdered cleansers are not recommended for cleaning unsealed or unglazed tile, and many types of stone." Soft Scrub is a cream, not a powder, but it carries the same kind of limestone grit, so treat it as a spot tool on bare grout, not a weekly scrub. Comet on grout covers the same question for a powder with the same mineral.

Can you use Soft Scrub on colored grout?

Two answers circulate, and one of them comes from Henkel. Soft Scrub's grout page carries a tip: "Try Soft Scrub Total All Purpose Bleach Spray to clean your tile and grout! It is one of the few products safe for cleaning colored grout." The only Soft Scrub Total bleach sheet found lists 1 to 5 percent sodium hypochlorite at pH 12.0 to 13.0. That spray is not among the four cleansers on Soft Scrub's product pages today, and the tip cites no test.

The other answer comes from grout makers and other cleaner makers.

  • A grout maker. TEC's Power Grout care bulletin (November 2025): "Do not use vinegar, bleach, ammonia or other general purpose cleaning products ... Using these routinely can degrade the grout."
  • A cleaner maker. Simple Green's grout page: "chlorine bleach will leach color out of tinted grout."
  • The Soft Scrub label itself. "Prolonged contact on delicate surfaces may cause discoloration. Rinse promptly after standing time."

The grout makers' side is the one to follow, because Henkel's tip is a marketing line about a spray with no test behind it, and its own cream label warns of discoloration. The full case on chlorine and pigment is on the bleach on grout page.

So here is the ruling: on colored grout, Soft Scrub with Bleach and the Gel are spot tools for one mildew stain, after a test on a hidden joint. For routine stain work on color, start with oxygen bleach, which OxiClean on grout covers. Soft Scrub Lemon has no bleach, so the color rule does not apply to it, but rub lightly and rinse, because the grit still wears.

A worked case: one bathroom, three surfaces

Take a bathroom with white glazed tile on the shower walls and white cement grout that was never sealed. The shower floor is gray porcelain mosaic with charcoal grout, sealed with a penetrating sealer, and the curb at the shower door is polished white marble. There are mildew spots in the wall corners and the floor joints, and the drain cover is brass. Under the sink sits a bottle of Soft Scrub with Bleach.

Start with the white wall grout. The label lists glazed tile and showers, and white grout has no color to lose. Open a window and rinse off any other cleaner first. Squeeze a little cream onto a damp sponge, work it along the stained joints, leave it up to 5 minutes, and rinse with clean water. Do not count on it to kill the mold inside the joint, since the label claims only the stain.

Now the charcoal floor grout, where two rules apply. The grout is colored, so test first on a joint behind the door, rinse it, and judge it only once dry, since grout looks darker wet. The grout is also sealed, and a sealer maker such as Aqua Mix says no bleach on its sealer. So start with an oxygen cleaner, use Soft Scrub only on spots that would not lift, then do a water drop test to see if the sealer still beads water.

Then the curb. The grit is as hard as the marble, so keep the cream off it, and if some lands there, wipe and rinse at once. The brass drain cover is on the label's banned list, so the same goes for that.

Change one fact and the answer shifts. If the floor grout were epoxy, the cream is fine there for a short, rinsed spot clean. If it had been recolored with a colorant, skip the bleach cream on it entirely.

Grout by grout: where the makers draw the lines

White or light cement grout, unsealed, between glazed tile. Yes to the bleach cream for spots, since the label lists glazed tile and showers and names grout among the soils it removes. Leave it 5 minutes at most on mildew stains, then rinse. The Lemon cream is fine here too, rinsed. Wait until the grout has cured; grout cure time covers how long.

Colored cement grout. Bleach cream and Gel: one stain at a time, after a hidden test, by the TEC and Simple Green rules above. Lemon cream: yes, rubbed lightly and rinsed.

Sealed cement grout. Not as a routine with the bleach versions. The 2025 label lists "Sealed grout," but Aqua Mix Sealer's Choice Gold (TDS-158, March 23, 2023) says "Do not use cleaners containing ammonia, acids or bleach." The label speaks for the cleaner and the sealer sheet speaks for the sealer, so after any spot use, do a water drop test. The Lemon cream contains none of the three, so it passes that rule. See how often to seal grout.

Recolored grout. No to the bleach versions. Aqua Mix Grout Colorant (TDS-173, February 28, 2023) says "harsh cleaning methods and high-alkaline, acidic or solvent-based cleaners will affect wear." It also says to avoid direct scrubbing on the joints for 20 days, so the Lemon cream waits 20 days, then goes on gently and rarely. See grout colorant.

Epoxy grout. Yes, for a short, rinsed spot clean. LATICRETE's chart for SPECTRALOCK PRO Premium (DS-681.0-0217) rates 5 percent sodium hypochlorite "R," recommended, at 30 minutes and 24 hours, and "NR," not recommended, at 7 days. Soft Scrub's label strength is 1.1 percent, and its longest wait is 5 minutes. The Lemon cream has no bleach, and at pH 10.2 to 10.8 it is milder than cement grout itself, so it is fine on epoxy too, rinsed. More in cleaning epoxy grout.

Polished marble, limestone or travertine. No to the creams. The grit is the same mineral as the stone, and the label allows only sealed stone, used sparingly. The Gel has no grit, but no Soft Scrub document clears it for stone, so this page does not either. See grout for natural stone.

Glass tile and sealed granite. The grit is softer than both, per Soft Scrub's FAQ and geology.com. The Gel has no grit, and Soft Scrub's granite page recommends it along with the cream. Rub gently and rinse. On granite, the label's "sealed natural stone" rule applies: use sparingly.

Next to metal. The bleach cream's label bans copper, brass, silver and aluminum, so wipe it off drains and trim made of those metals at once. No Gel or Lemon label was found, so that ban is the bleach cream's alone; rinse any cleaner off metal anyway.

Soft Scrub or not: grout by grout

Soft Scrub on grout, from the EPA labels, Soft Scrub's sheets and the grout, sealer and colorant makers' rules above
Grout or surfaceSoft Scrub with Bleach (cream) and GelSoft Scrub Lemon (no bleach)Why
White or light cement grout, glazed tileYes for spots: up to 5 min on mildew stains, rinseYes, rinseLabel 64240-44: glazed tile, showers, "Grout" in soils removed; 5 min mildew stains
Colored cement groutOne stain only, after a hidden testYes, light rub, rinseTEC: no bleach "routinely"; Simple Green: bleach leaches tint; label: may discolor
Sealed cement groutNot routine; water drop test afterYes, gently2025 label lists "Sealed grout"; Aqua Mix TDS-158: no "ammonia, acids or bleach"
Recolored grout (colorant)NoNot for 20 days, then gentlyAqua Mix TDS-173: high-alkaline cleaners and harsh methods affect wear; no scrubbing for 20 days
Epoxy groutYes, short and rinsedYes, rinseLATICRETE DS-681.0-0217: 5% hypochlorite R at 24 h, NR at 7 days
Polished marble, limestone, travertineNoNoCalcite grit = calcite stone, Mohs 3; label: sealed stone only, sparingly
Glass tile, sealed graniteYes, gently, rinseYes, gently, rinseSoft Scrub FAQ: grit softer than granite and glass; label: sealed stone sparingly
Brass, copper, silver, aluminum trimCream: keep off, wipe at once. Gel: no label found; rinse offNo label found; rinse offBleach cream label: "Do not use on copper, brass, silver, aluminum"
Killing germs in the groutCream: sealed grout only (2025 label), 3 min. Gel: no label foundNo claimCream label: disinfect hard, nonporous surfaces; Lemon sheet: no EPA registration

Bottom line: Soft Scrub with Bleach is fine on white cement or epoxy grout between glazed tile as a spot clean: rub, up to 5 minutes on mildew stains, rinse. Its label names sealed grout, not bare grout, and it removes mildew stains rather than killing mold in the joint. On colored grout use it for one stain after a test, and reach for oxygen bleach first. Keep it off recolored grout, off sealed grout as a habit, and off marble and other calcite stone. The bleach-free Lemon cream is the routine choice on colored grout, rubbed lightly and rinsed.

How to use Soft Scrub on grout

  1. Check the bottle. "with Bleach" and the Gel contain bleach, and "Lemon" does not. Shake the cream first, since Soft Scrub says the grit settles to the bottom.
  2. Check the grout. White cement or epoxy: go ahead. Colored: test a hidden joint. Sealed: spots only. Recolored or marble: stop.
  3. Rinse off other cleaners first. The sheet warns that the bleach cream reacts with "acid toilet bowl cleaners, rust removers, acids, vinegar, and ammonia-containing products" to give off chlorine gases.
  4. Open a window and wear gloves. The label says "For sensitive skin or prolonged use, wear gloves," and warns of eye injury.
  5. Put a little on a damp sponge, not in a pile on the floor, and rub along the joint with light pressure.
  6. Wait no more than 5 minutes on mildew stains, and for plain soil, rub and rinse right away.
  7. Rinse with plenty of clean water. The label says "Rinse promptly after standing time." Grout holds what dries in it; grout porosity and absorption explains why.
  8. Wipe metal at once. Copper, brass, silver and aluminum are on the label's banned list.

If the stain stays after two rounds, it may be mildew deep in old grout. Grout mold and mildew covers the next step.

Soft Scrub, Comet or Tilex?

All three carry chlorine bleach. Comet powder has the same limestone grit and a dry chlorine compound, but its label bans walls, while Soft Scrub's lists showers and has no wall ban. Tilex Mold & Mildew Remover is a spray with no grit, and its label names grout and cement with a 10-minute kill time, where Soft Scrub claims only the stain. So for mildew you want killed, Tilex has the label behind it, and for soap scum on wall joints, Soft Scrub lists soap scum among the soils it removes.

Where this answer stops applying

This page covers Soft Scrub with Bleach on its EPA labels from 2003 to 2025 and its 2017 and 2018 safety sheets, the Gel with Bleach and Soft Scrub Total with Bleach on their 2015 sheets, and Soft Scrub Lemon on its 2012 sheet. Soft Scrub Oxi is not covered: no sheet for it was found, so this page makes no ruling on it. No Gel label or directions could be retrieved, so its rules here come from its ingredients, not its label. Formulas change, so read the label on the bottle you have. No source found measures how much grout, color or sealer one Soft Scrub scrub removes, so this page gives no figure. It does not rule on premixed acrylic or urethane grout, whose makers' care sheets govern. Grout that is soft, sandy or cracked needs repair, not scrubbing. The mixing warning applies on every surface: never use Soft Scrub with Bleach with acids, vinegar, toilet bowl cleaners or ammonia, and keep air moving.

Frequently asked questions

Is Soft Scrub safe on grout?

Soft Scrub with Bleach is fine on white cement grout and on epoxy grout as a short, rinsed spot clean. Its label names "sealed grout," not bare grout. Use it on colored grout only after a test, and keep it off recolored grout.

How long do you leave Soft Scrub on grout?

Up to 5 minutes for mildew stains, then rinse or wipe clean. That is the label's time for stains. Its 3-minute germ time is for hard, nonporous surfaces, which since 2025 includes sealed grout.

Will Soft Scrub with Bleach fade colored grout?

The label warns that "prolonged contact on delicate surfaces may cause discoloration." Simple Green says chlorine bleach leaches color from tinted grout, and TEC says not to use bleach on its grout routinely. Test a hidden joint and rinse well.

Does Soft Scrub scratch tile?

Not glazed tile, glass or granite, by Soft Scrub's own FAQ: its calcium carbonate grit is 3 on the Mohs scale, softer than those surfaces. Marble is the exception, because marble is made of the same mineral.

Is Soft Scrub Gel abrasive?

No. Soft Scrub calls the Gel a "non-abrasive formula," and its sheet lists no grit. It does list bleach and sodium hydroxide, so the colored, sealed and recolored grout rules still apply.

Is there a Soft Scrub without bleach?

Yes. Soft Scrub Lemon (and Soft Scrub with Baking Soda) has the same kind of grit with no bleach, at pH 10.2 to 10.8. It will not bleach mildew spots, but it is the safer choice for routine scrubbing of colored grout. See soap scum and hard water on grout for film it may not shift.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.