Do Grout Pens Work? Coverage, Dry Time and Limits
On this page
- What a grout pen is
- The maker's numbers
- How thin the coat is
- A worked case: one shower wall, one floor
- Why sealed grout has to be stripped first
- Protecting the tile
- Odorless and non-toxic?
- Grout pen or brush-on colorant?
- When a pen is the wrong fix
- Where this answer stops applying
- Frequently asked questions
- Sources and standards
Yes, if you ask a grout pen to do what it does: put a thin coat of white or buff color on grout that is already clean, dry, sound and unsealed. The maker's sheet says one pen covers 37 to 145 linear feet, dries to the touch in 45 to 60 minutes, and needs 2 hours between coats. It does not clean grout or fill cracks, and the maker says any sealer must come off first.
Key takeaways
- A grout pen is a marker filled with a white, paint-like coating. You draw it along the joint, and the coat hides the old color and stains.
- The Miracle Sealants Grout Pen data sheet (04-2011) gives 37 to 145 linear feet per pen. The box and Rust-Oleum's page say 175 feet "of average grout lines." Plan on the sheet's range.
- Timing from the sheet: wipe the tile after 5 to 10 minutes, wait 2 hours between coats, dry to the touch in 45 to 60 minutes, keep it dry 72 hours, and no direct scrubbing for 20 days.
- The grout must be bare. If a few drops of water bead up instead of soaking in, the sheet says the sealer "must be removed before continuing."
- One pen holds 7.4 mL. A 5 by 8 foot wall of 3x6 subway tile has about 240 feet of joint, so it takes 2 to 7 pens per coat. Past that size, a bottle of brush-on colorant is the better tool.
What a grout pen is
A grout pen is a marker, about the size of a fat felt pen, with a fiber tip called a nib. Instead of ink it holds a thick, colored coating. You shake it, press the nib into the grout joint and run it back and forth. The coating dries on top of the grout as a thin colored layer.
So a grout pen is a kind of paint. Its own safety data sheet says so in plain words. It lists the look as a "White opaque thick viscosity liquid," the smell as "Paint," and says to clean up a spill as you would "water based paint." The one named ingredient is titanium dioxide, the white pigment used in most white paints.
Three more terms decide the answer.
- Linear feet is the length of joint you color, measured along the grout line, not the area of the wall.
- A penetrating sealer soaks into grout and leaves no film on top. It keeps the grout's look. A coating sits on the surface as a film. Penetrating vs membrane sealer covers the difference.
- Grout colorant is the brush-on version of the same idea: a bottle of tinted coating you work into the joints with a small brush. Grout colorant has the full method.
Two products are sold as "grout pens"
Part of the mixed advice online comes from one name used for two products. Most grout pens are color pens, like the Miracle Sealants pen this page is built on. But Clorox sold a Tilex Tile and Grout Gel (Pen), and its safety sheet (February 25, 2011) describes a "white, viscous liquid with chlorine odor." It lists sodium hypochlorite (bleach) at 0.5 to 2 percent, aluminum oxide at 1 to 5 percent and sodium hydroxide under 1 percent, at pH 12.3 to 12.9.
That pen is a cleaner. It bleaches a stain away, and the color pen paints over it. The Miracle sheet says its pen "will cover mold and mildew stains." Cover is the right word: the stain is still under the coat. If you want the stain gone, a bleach product does that job. Tilex on grout sets out where bleach is safe on grout, and grout mold and mildew covers growth that keeps coming back.
The maker's numbers
Miracle Sealants (now a Rust-Oleum brand) publishes a two-page data sheet for its Grout Pen, dated 04-2011, and a safety data sheet, MSC-008A, revised April 6, 2015. Both name the same use: "Grout Color Modification For All Sanded, Non-sanded, Epoxy Grout and Mortar Joints."
| What | Figure | Where it comes from |
|---|---|---|
| Coverage per pen | 37 to 145 linear feet | Data sheet (04-2011) |
| Coverage on the box | 175 linear feet "of average grout lines" | Rust-Oleum US and Canada product pages |
| Fill | 7.4 mL | Rust-Oleum Canada product page |
| Colors | 2: white and buff | Data sheet; Rust-Oleum page |
| Air temperature to apply | 50 to 80 deg F (10 to 27 deg C) | Data sheet |
| Wipe tile face | After at least 5 to 10 minutes, water and the nylon pad in the pack | Data sheet |
| Between coats | At least 2 hours | Data sheet |
| Dry to the touch | 45 to 60 minutes, "and may be put into service" | Data sheet |
| Keep dry and free of staining materials | 72 hours, "for optimum results" | Data sheet |
| No direct scrubbing on the joints | At least 20 days, "to allow Grout Pen to reach maximum durability" | Data sheet |
| Shelf life | 12 months stored at 77 deg F (25 deg C). "Do not allow to freeze." | Data sheet |
| pH | "No data" | SDS MSC-008A |
| Fire class | Combustible liquid (Category 4), flash point 199 deg F | SDS MSC-008A |
The sheet's range is wide because, in its words, coverage varies with "the density, porosity, texture, surface absorption" of the grout and with how you apply it. Rough, open sanded grout drinks more coating than smooth unsanded grout. The 175-foot figure on the box is the "average," and it sits above the top of the sheet's own range. So plan with 37 to 145 feet and treat 175 as a best case.
Note which number means what. Dry to the touch at 45 to 60 minutes means you can walk past it. The 72 hours is how long to keep water and stains off it. The 20 days is the real cure: until then, the coat has not reached full strength, so a scrub brush can lift it. The sheet also gives a check: if the coat comes off the joint easily, "allow longer curing time."
How thin the coat is
A little arithmetic shows why a pen cannot fix damaged grout. Spread 7.4 mL along a 1/8-inch joint and the wet layer comes out about 0.05 mm thick at 145 feet and about 0.2 mm at 37 feet. That is 0.002 to 0.008 inch, and it assumes every drop lands on the joint. The dried coat is thinner still, since part of any liquid coating dries off.
A layer that thin follows the shape of the grout under it. It cannot fill a gap, rebuild a low or recessed joint, or hold soft or crumbling grout together. Those joints need grout, and spot grout repair shows how to replace a few feet of it before you color.
A worked case: one shower wall, one floor
Take a shower back wall 5 feet wide and 8 feet tall, in 3x6 inch white subway tile with 1/8-inch joints. The grout was white and has gone gray, and it was never sealed. Here is how the sheet's numbers play out.
How much joint. Each 3x6 tile adds about 9 inches of joint (one long side and one short side), and 8 tiles fill a square foot. That gives about 6 linear feet of joint per square foot, close to the figure in our grout joint area analysis. The wall is 40 square feet, so it has about 240 feet of joint.
How many pens. At 145 feet per pen, one coat takes 2 pens. At 37 feet, it takes 7. At the box's 175 feet, it takes 2. Gray to white may need a second coat, since the sheet says going "from a dark color to a light color, 2 or more applications may be necessary." Two coats means 4 to 13 pens.
The test first. Drop a little water on a few joints. On this wall it soaks in and darkens the grout, which the sheet reads as no working sealer. If it beaded, the sealer would have to come off first.
The day. Clean the joints, rinse and let them dry. With the room between 50 and 80 deg F, run the pen along a section, wait 5 to 10 minutes, then wipe the tile faces with water and the nylon pad. The sheet says the coat should come off sealed or glazed tile easily but stay on the grout. Start the second coat 2 hours after the first. Keep the shower off for 72 hours, and do not scrub those joints for 20 days.
Now change one fact: the floor of the same bathroom, 5 by 8 feet in 12x12 inch tile. Each 12x12 tile adds about 24 inches of joint, and one tile fills a square foot, so the floor has about 80 feet. One coat takes 1 to 3 pens. The same 40 square feet needs a third as many pens, because big tile has far less joint. Tile size, not room size, decides whether a pen is practical. To run the joint length for your own tile, the sealer coverage calculator gives linear feet.
Why sealed grout has to be stripped first
The data sheet puts it in one line: "If a sealer/coating is present it must be removed before continuing." It gives the test too. Apply "a few drops of water to grout. If the water absorbs and darkens the grout then a sealer/coating has not been used or is no longer effective." Our water drop test page shows how to read the result.
The reason is grip. A penetrating sealer is made to keep liquids from soaking into the grout, and a coating needs to soak in a little to hold on. Miracle's own Grout Sealer sheet sends you the other way for color: "For changing the color of sanded, epoxy and non-sanded grout joints use the Grout Pen." So on a given joint, you pick one. Seal it, or color it with the pen.
That does not leave the colored joint bare. The pen sheet says the coating "will seal and protect new grout from moisture and staining," and neither Miracle sheet calls for a sealer on top. But that protection lasts only as long as the coat. Where the coat wears through, the grout under it is unsealed. If old sealer has to come off, how to remove grout sealer covers the strippers.
New grout has its own wait. The sheet says grout "should be allowed to cure per manufacturer's specification" before you use the pen. Grout cure time lists those waits by grout type.
Protecting the tile
The sheet expects the coating to wipe off "properly sealed porous tile or non-porous tile." Glazed ceramic and porcelain are non-porous, so a damp wipe after 5 to 10 minutes clears them. Porous tile is different: unglazed tile and many natural stones can soak up the coating and stain. For those, the sheet says to seal the tile with a penetrating sealer before you use the pen, and to keep that sealer off the grout you plan to color.
The sheet also says to protect "wood, carpet, metal, landscaping and other non masonry surfaces." Mask trim and cabinet edges before you start.
Odorless and non-toxic?
Rust-Oleum's product page calls the pen "Non-Toxic" and "completely odorless - no fumes!" Its own sheets are more careful. The data sheet says the pen "contains combustible petroleum distillate," tells you to work with "fresh air ... flowing in such a way as to feel a slight breeze," and says "Chemical resistant gloves should be worn at all times." The SDS classes it as a combustible liquid with a flash point of 199 deg F and lists titanium dioxide, which IARC rates Group 2B (possible carcinogen) "when it appears as a respirable dust."
The sheets are the documents to follow, not the box. Open a window, wear gloves, and keep the pen away from flames. A fine dust is not what comes out of a nib, but the SDS lists the rating, so this page does too.
Not every color pen is the same. Magic American's Tile and Grout Coating Pen 3076 (SDS revised March 27, 2015) lists two glycol ethers and an amine at 1 to 5 percent each, an ammonia odor, a flash point of 150 deg F, and a "Danger" signal word. It is classed as a respiratory sensitizer that "may cause allergy or asthma symptoms or breathing difficulties if inhaled." That sheet gives no coverage or dry times, so this page cannot compare it on those. Read the sheet for the pen you buy.
Grout pen or brush-on colorant?
Both lay a tinted coat on the joint and both need clean, bare grout. The difference is size and choice. Custom Building Products' Aqua Mix Grout Colorant (TDS-173, February 28, 2023) is a "waterborne epoxy" sold in 8 oz (237 mL) bottles. One bottle holds as much liquid as 32 grout pens. It comes in 20 US colors, against the pen's two. Its sheet gives "Expected Wear Up To 15 Years," depending on the "type of area, surface wear, frequency, and type of maintenance products used." Miracle publishes no wear figure for its pen, so this page gives none.
The two sheets agree on timing more than they differ. Both say 2 hours between coats. Both say no direct scrubbing on the joints for 20 days. Aqua Mix says keep the area dry 24 hours, and Miracle says 72.
| Job | Better tool | Why |
|---|---|---|
| White or buff touch-up on a few feet of joint | Grout pen | 37 to 145 ft per 7.4 mL pen; no brush or mixing (Miracle data sheet) |
| A whole wall of small tile, like 3x6 subway | Colorant | About 240 ft per 40 sq ft wall = 2 to 7 pens per coat; one 237 mL bottle = 32 pens of liquid (TDS-173) |
| Any color other than white or buff | Colorant | Pen comes in 2 colors; Aqua Mix lists 20 in the US (TDS-173) |
| Sealed grout (water beads) | Neither until the sealer is off | Pen sheet: sealer "must be removed"; TDS-173 allows only certain Aqua Mix sealers to stay |
| Mildew stain you want gone | Neither: a bleach cleaner | Pen sheet: "will cover" stains; the Tilex gel pen is bleach (Clorox MSDS 2011) |
| Cracked, low, soft or missing grout | Neither: repair or regrout | Wet coat 0.05 to 0.2 mm thick cannot fill a gap (arithmetic above) |
One more point from the colorant sheet: if you need more than one bottle of a color, Aqua Mix says to mix them together first so the color matches. Pens give you no way to do that. On a long run of joint, check each new pen against the last one.
When a pen is the wrong fix
A pen changes color. It does not change the grout. If the grout is cracked, sandy, falling out or below the tile edge, color will not hold, because there is nothing sound under it to hold to. A key or screwdriver run along the joint tells you quickly: sound grout resists, and bad grout gouges or powders. Repair or replace grout walks through the choice between patching, regrouting and retiling. If a few joints fail and the rest are sound, repair those first, let the new grout cure, and then use the pen.
Water is the other limit. If grout stays dark long after a shower, or tiles sound hollow, the problem is behind the tile. A coat on the joint will hide the sign for a while, and that is worse than doing nothing.
Bottom line: grout pens work as a thin paint coat on clean, dry, sound, unsealed grout, in white or buff. Plan on 37 to 145 feet per pen, wipe the tile after 5 to 10 minutes, wait 2 hours between coats, keep it dry 72 hours, and do not scrub it for 20 days. Use a pen for touch-ups and small runs. Use brush-on colorant for whole walls of small tile or other colors, and repair or regrout damaged joints first.
Where this answer stops applying
This page is built on the Miracle Sealants Grout Pen data sheet (04-2011), its SDS (revised 2015) and Rust-Oleum's current product pages. Other brands use other formulas, and the only other pen sheets found, Magic American's and the Tilex gel's, give no coverage or cure figures. Formulas change, so read the sheet for the pen in your hand. No source found measures how long a pen coat lasts on a floor or in a shower, so this page gives no figure. It does not rule on premixed acrylic or urethane grout, which the pen sheet does not name. The pen does nothing about mold growing inside the grout or about leaks behind the tile. Those need cleaning or repair, and a coat on top can hide them. Ventilate and wear gloves every time, whatever the box says.
Frequently asked questions
How long does a grout pen take to dry?
The Miracle sheet says 45 to 60 minutes to the touch, and the area can be used then. Keep it dry and free of stains for 72 hours, and avoid direct scrubbing for 20 days while the coat reaches full strength.
How many feet does one grout pen cover?
The maker's data sheet says 37 to 145 linear feet per pen, and the box says 175 feet of average grout lines. Rough sanded grout and second coats use more. Count about 6 feet of joint per square foot of 3x6 subway tile and about 2 feet for 12x12 tile.
Can you use a grout pen on sealed grout?
Not as is. The data sheet says any sealer or coating "must be removed before continuing." If drops of water bead on the joint, strip the sealer first, let the grout dry, then use the pen.
Do you need to seal grout after using a grout pen?
The Miracle sheet says the pen itself "will seal and protect new grout from moisture and staining," and neither Miracle sheet calls for a sealer on top. The protection lasts only as long as the coat.
Will a grout pen cover mold?
It covers the stain, not the mold. The sheet says it "will cover mold and mildew stains." Clean the growth off first with a bleach or oxygen cleaner, rinse, and let the joint dry before you color it.
Do grout pens work on epoxy grout?
The Miracle data sheet and SDS both list "Epoxy Grout" among the joints it is made for. Clean the epoxy well, since the coat needs a clean surface to grip.
Sources and standards
- Miracle Sealants Company, Grout Pen product data sheet (04-2011)
- Miracle Sealants Company, Grout Pen safety data sheet, MSC-008A (issued April 1, 2011; revised April 6, 2015)
- Miracle Sealants Company, Grout Sealer product data sheet (the penetrating sealer; refers color changes to the Grout Pen)
- Rust-Oleum, Miracle Grout Pen product page (US) and Grout Pen product page (Canada, 7.4 mL)
- The Clorox Company, Tilex Tile and Grout Gel (Pen) material safety data sheet (prepared February 25, 2011)
- Magic American, Tile and Grout Coating Pen 3076 safety data sheet (revised March 27, 2015)
- Custom Building Products, Aqua Mix Grout Colorant, TDS-173 (February 28, 2023)
- Grout Atlas, grout joint area analysis: linear feet of joint per tile size
Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.