Can You Use TSP on Grout?

CleaningUpdated 13 min readHow we research

On this page
  1. What TSP is
  2. Is TSP acidic? No. The claim checked
  3. What is in the box: Savogran's safety data sheets
  4. What the TSP box tells you to do
  5. Why the label says no puddles
  6. A worked case: a greasy floor before resealing
  7. Grout by grout: what each maker's sheet says
  8. TSP or not: grout by grout
  9. TSP substitutes: what is in them
  10. How to clean grout with TSP
  11. Where this answer stops applying
  12. Frequently asked questions
  13. Sources and standards

Yes, on cement grout, at the strength on the box: 1/2 cup of TSP in 2 gallons of hot water, scrubbed in, then rinsed with clean water. It is a good degreaser and a good cleaning step before you seal or recolor grout. TSP is an alkali, pH 11 to 12 on Savogran's safety data sheet, so the common claim that its "acidic nature" etches grout is wrong. The limits are elsewhere. Never let the solution stand in puddles or dry in the joints. Keep it off glass tile, aluminum trim, marble, and sealed or recolored grout you want to keep. Never mix it with an acid.

Key takeaways

  • Savogran TSP is 75 to 80 percent trisodium phosphate and 20 to 25 percent sodium sesquicarbonate. Its pH is 11 to 12 in a 1 percent solution. That is alkaline, not acidic.
  • Cement grout is alkaline too. MAPEI's Keracolor S grout reads pH 11.00 in water. TSP does not dissolve it the way acid does.
  • Label method: 1/2 cup in 2 gallons of hot water, "Rinse with clean warm water," and "DO NOT allow water or TSP solution to stand in puddles."
  • The label bans glass: "DO NOT allow TSP solution to come in contact with glass." The sheet warns that TSP in water attacks aluminum.
  • Strong alkaline cleaners shorten sealer and colorant life (Aqua Mix TDS-164, TDS-173). Use TSP as a deep clean before resealing, not as a routine mop on sealed grout.

What TSP is

TSP stands for trisodium phosphate, a white powder sold in paint aisles as a heavy-duty cleaner. You dissolve it in hot water. Savogran's box says it "Removes greasy, sooty dirt and prepares painted surfaces for repainting."

TSP is a salt that makes water alkaline, the opposite of acidic. On the pH scale, 7 is neutral, below 7 is acid (like vinegar) and above 7 is alkaline (like ammonia or lye). Each whole step is ten times stronger than the one before. Alkaline cleaners turn fats into a kind of soap that rinses off, which is why TSP works on a greasy kitchen floor. The grout cleaner pH chart puts common cleaners on one scale.

Is TSP acidic? No. The claim checked

Two answers circulate. One says TSP will ruin grout because it is an acid. A June 2024 Apartment Therapy article by Barbara Bellesi Zito, syndicated on Yahoo, lists "Glass and tile" among places not to use it: "TSP's acidic nature will etch the surface and destroy the grout." A Bob Vila article by Tom Scalisi (updated November 2022) says the same: "the solution's acidity could etch the glass surface, and it can also eat away at the grout between the tiles."

The maker's own sheet says otherwise. Savogran's safety data sheet for TSP (product code 620N, revised November 16, 2016) gives "pH(1% in H2O): 11-12." It says solutions in water "are moderately to strong alkaline." The other answer comes from trade forums, and it is the one that holds up. On Fine Homebuilding in 2004, one poster wrote: "try a strong solution of TSP before you decide. I have seen it work wonders on old grout." A 2000 thread on dyeing grout said: "Usually you would clean the grout thoroughly with something like TSP beforehand."

Why does the acid claim persist? Partly it is a real warning given the wrong reason: the label does ban glass, and the sheet does warn about aluminum, but those are alkaline effects. Partly it is a line that has spread across cleaning sites. This Old House (June 2024) says TSP "shouldn't be used to clean grout" but "is an active ingredient in grout removal products." It names no such product, and this page found none.

Acid is what dissolves cement grout, which is alkaline itself. MAPEI's Keracolor S sanded grout safety data sheet (version 10, March 26, 2026) gives "pH (water dispersion, 10%): 11.00" and says "Cement gives a strong alkaline reaction with water." TSP at pH 11 to 12 sits right beside it. The pages on muriatic acid and vinegar show what acid does to the same joint.

What is in the box: Savogran's safety data sheets

A safety data sheet (SDS) is the maker's record of what is in a product and how hazardous it is. Here are Savogran's TSP and its two phosphate-free substitutes, next to a grout cleaner, a cement grout and an oven cleaner.

TSP and its substitutes on Savogran's sheets, set against grout and two other alkaline products
Product (sheet, date)Main ingredientspHAluminum warning
Savogran TSP (620N, November 16, 2016)Trisodium phosphate dodecahydrate 75-80%, sodium sesquicarbonate 20-25%11-12 (1% in water)Yes
Savogran Liquid TSP Substitute (630N, November 16, 2016)Tetrasodium EDTA 0.1-5%, sodium metasilicate 0.1-5%10-11 (1% in water)Yes
Savogran TSP-PF (611N, November 16, 2016)Sodium sesquicarbonate 90-95%, sodium metasilicate 0.1-5%, tetrasodium EDTA 0.1-5%10-11 (1% in water)Yes
Aqua Mix Heavy-Duty Tile & Grout Cleaner (TDS-164, March 23, 2023)Sodium hydroxide, ethylene glycol monobutyl ether11-12Not stated
MAPEI Keracolor S sanded grout (SDS v10, March 26, 2026)Portland cement11.00 (10% in water)Not stated
Easy-Off Heavy Duty Oven Cleaner (D8362392 v4.0, 2021)Sodium hydroxide 1-5%13.3, used straightLabel bans aluminum

TSP and the Aqua Mix grout cleaner share a pH range, though they get there with different chemicals. Aqua Mix sells its cleaner for tile and grout, so TSP is not a harsher class of product. Oven cleaner is, at pH 13.3, about 20 to 200 times more alkaline, and it goes on undiluted.

All three Savogran sheets carry the same line: solutions "may produce hydrogen gas when in contact with aluminum" and "Will react with acids to form carbon dioxide." The 2016 TSP sheet rates it a skin and eye irritant (Category 2 and 2A). The box says "May cause burns."

What the TSP box tells you to do

The Savogran box (1 lb and 4.5 lb, Home Depot's copies) gives one method for floors and walls:

  • "Heavy Duty cleaning: Dissolve 1/2 cup TSP in 2 gallons of hot water."
  • For floors: "wring excess cleaner from mop or sponge and wash floor in small areas. Rinse with clean warm water and wipe up excess water. DO NOT allow water or TSP solution to stand in puddles."
  • "NOT RECOMMENDED for use on glass surfaces. DO NOT allow TSP solution to come in contact with glass."
  • "Hot TSP solutions will darken aluminum containers and may remove or degloss paints and enamels."
  • "Do not mix with acids. Use only according to mixing directions on container."

How strong is that? The box says 1/2 cup holds 6.9 grams of phosphorus at 6.1 percent, so 1/2 cup is about 113 grams of powder. In 2 gallons of water (about 7.6 kg), that is roughly 1.5 percent. So the pH on the sheet, measured at 1 percent, is close to what is in your bucket.

The label never names tile or grout, and it does not ban them. Grout on a floor gets the floor directions.

Why the label says no puddles

The real risk to a porous joint is not acid but salt left behind. TSP is a salt, so if the solution soaks into a joint and dries there, the water leaves and the salt stays.

The U.S. Bureau of Standards tested this on marble in 1927. D. W. Kessler's Technologic Paper 350 studied trade cleaners that contained "sodium carbonate, sodium bicarbonate, and trisodium phosphate." He found that marble "could be soaked in a strong solution of such salts for months without causing any noticeable alteration." Soaking and drying again and again was different: "Crystals of the salt form in the pores of the marble and as the crystals increase in size a pressure is exerted from within." In scrubbing tests, a mostly-TSP cleaner at 1 to 2 percent showed "a loss in strength of nearly 12 per cent."

The same paper found a fix. Kessler wet the marble with clean water before scrubbing. He assumed the dampening kept the cleaner from soaking in. With a 10 percent TSP solution, he reports that "as far as strength is concerned it appears that the preliminary rinsing fully overcame the action of the salts."

The study tested marble, not grout, but it explains why the Savogran label insists on a rinse and no puddles. It also notes that "Several materials which are more porous and weaker than marble will begin to crumble under such treatment within a short time." Cement grout is porous (see grout porosity). So damp the joints first, keep the TSP wet while you work, and rinse it out.

A worked case: a greasy floor before resealing

Take a kitchen floor of glazed porcelain tile with gray cement grout, sealed years ago. The joints in front of the range are dark with grease, a water drop now soaks in, and an aluminum edge strip sits at the doorway. The goal is to clean it and reseal.

Walk it through the sheets. The tile is not glass, and the grout is cement at about pH 11, so TSP at pH 11 to 12 is no threat to it. The old sealer is failing and will be replaced, so the alkali's effect on sealer life does not count here. The aluminum strip is the one thing in the room the sheet warns about.

So the plan is to cover the strip, damp the joints, and follow the steps below at label strength, with two clean rinses and no puddles. Once the floor is fully dry, it can be resealed: Aqua Mix Sealer's Choice Gold (TDS-158) asks for a surface that is "dry, clean and free of waxes, sealers or finishes." See how to seal grout.

Grout by grout: what each maker's sheet says

Unsealed cement grout. Yes, at label strength, rinsed. Pre-wet, then rinse twice so no salt dries in the pores.

Sealed cement grout. As a deep clean before resealing, yes. As a routine cleaner, no. Aqua Mix TDS-164 says "Regular use of high-alkaline cleaners will reduce sealer life." TDS-158 lists "high-alkaline, acidic, or solvent-based cleaners" among things that "will affect wear." Check it after with a water drop test.

Before a colorant or sealer. Yes, as the cleaning step, rinsed and dried. Aqua Mix Grout Colorant (TDS-173) needs joints "clean, dry and free of existing sealers or coatings." For most tile it names an acid pre-treat; for acid-sensitive stone or single-component grout, its alkaline Heavy-Duty Tile & Grout Cleaner (pH 11 to 12). It names its own products, not TSP. If an acid prep follows TSP, rinse well between them, since the label says never mix TSP with acids. See grout colorant.

Recolored grout. No. TDS-164 says even its own pH 11 to 12 cleaner "May adversely affect grout joints that have been coated with colorant or grout stain." TDS-173 lists high-alkaline cleaners among things that "will affect wear."

Epoxy grout. Yes, rinsed. LATICRETE's chart for SPECTRALOCK PRO Premium (DS-681.0-0217) rates 45 percent potassium hydroxide, a far stronger alkali, "R" (resistant) for 7 days. The chart has no TSP row. For routine care LATICRETE asks for a neutral pH cleaner. Its glow-in-the-dark DAZZLE grout "might discolor from strong alkali cleaners," so keep TSP off it. See cleaning epoxy grout.

Glass tile. No. The label says TSP must not touch glass. Glass mosaic is glass. See grout for glass tile.

Marble. No. Aqua Mix lists natural stone for its own pH 11 to 12 cleaner, so pH is not the issue. The 1927 study measured strength loss in marble scrubbed with TSP cleaners at 1 to 2 percent, from the salt drying in the pores. Use a cleaner made for stone. See grout for marble.

Aluminum trim. Keep TSP off it. The sheet warns of hydrogen gas and corrosion, and the label says hot TSP darkens aluminum. Many tile edge profiles are aluminum; see grout or caulk at Schluter trim.

TSP or not: grout by grout

TSP at label strength (1/2 cup per 2 gallons), from the label and the makers' sheets above
SituationTSP?Why
Cement grout, unsealedYespH 11-12, like grout itself (Keracolor S 11.00); pre-wet, rinse, no puddles (label, NBS T350)
Cement grout, sealed, before resealingYesSealer is being replaced; surface must be "dry, clean" (TDS-158)
Cement grout, sealed, routine cleaningNoHigh-alkaline cleaners "will reduce sealer life" (TDS-164)
Prep before colorantYes, rinsed and driedAlkaline prep is named for some grouts (TDS-173); never mix with acid prep (label)
Recolored groutNo"May adversely affect" colorant (TDS-164, TDS-173)
Epoxy groutYes, rinsedResistant to 45% KOH (DS-681.0-0217); neutral cleaner for routine care
Glow-in-the-dark epoxy (DAZZLE)No"Might discolor from strong alkali cleaners" (LATICRETE)
Glass tileNo"DO NOT allow TSP solution to come in contact with glass" (label)
MarbleNoSalt crystallization weakened marble in tests (NBS T350)
Aluminum trim nearbyCover itHydrogen gas and corrosion (SDS 620N); darkens aluminum (label)
Mixed with an acid cleanerNever"Do not mix with acids" (label); reacts to form carbon dioxide (SDS)

Bottom line: TSP is safe on cement and epoxy grout at 1/2 cup per 2 gallons of hot water, scrubbed and rinsed. It is an alkali at pH 11 to 12, like the grout itself, so it does not etch it. Use it to degrease and to clean before sealing or recoloring. Keep it off glass tile, marble, aluminum and recolored grout, never let it puddle or dry in the joints, and never mix it with acid.

TSP substitutes: what is in them

Savogran sells two phosphate-free versions next to TSP. Neither contains trisodium phosphate.

Liquid TSP Substitute is a liquid built on tetrasodium EDTA and sodium metasilicate, each at 0.1 to 5 percent. EDTA grabs the minerals in hard water. Metasilicate is an alkaline cleaner. Its pH is 10 to 11.

TSP-PF is a powder that is mostly sodium sesquicarbonate (90 to 95 percent), a mild alkali related to washing soda, with a little metasilicate and EDTA. Its pH is also 10 to 11.

At the top of each range, that is ten times less alkaline than TSP, which makes them the gentler choice on grout. They carry the same aluminum warning. Mix each by its own label, and apply the grout rules above to them too. For milder everyday grease on bare grout, household ammonia at pH 11.2 to 11.5 also works, diluted and rinsed.

How to clean grout with TSP

  1. Protect what it can harm. Cover aluminum trim, keep TSP off glass tile and marble, and wear gloves, eye protection and long sleeves, as the label asks.
  2. Sweep or vacuum, so grit does not grind into wet joints.
  3. Damp the joints with clean water. In the 1927 marble tests, this kept the cleaner from soaking in.
  4. Mix 1/2 cup TSP in 2 gallons of hot water. Do not make it stronger. The label says "Use only according to mixing directions."
  5. Work a small area. Apply with a mop or sponge and scrub the joints with a stiff nylon brush. Keep it wet. Do not let it dry.
  6. Wipe up the dirty solution, then rinse twice with clean warm water. Leave no puddles.
  7. Let it dry, then run a water drop test. Reseal if water darkens the joint.

For stains that remain after the grease is gone, grease and food stains on grout covers the next step.

Where this answer stops applying

This page covers Savogran TSP and its two substitutes, sold in the U.S., on tile grout. Other brands were not checked here, so read the ingredients on their sheets before you treat one as the same thing. The 1927 salt study measured marble, not grout. No study found measures how TSP affects cement grout over many cleanings, so this page gives no figure. No sheet found tests TSP on tile glaze, premixed acrylic or urethane grout, or grout younger than its cure time, and this page does not rule on them. Old grout that is already soft, sandy or cracked has another cause, and cleaning will not fix it. TSP burns eyes and skin whatever the surface, and the box asks for full eye protection and gloves.

Frequently asked questions

Will TSP damage grout?

Not cement or epoxy grout at the label strength, scrubbed and rinsed. It is an alkali, pH 11 to 12, and cement grout is about pH 11 itself. The harm comes from leaving it to dry in the joints, from sealer and colorant wear, and from glass, marble and aluminum nearby.

Is TSP an acid or a base?

A base (alkali). Savogran's sheet gives pH 11 to 12 for a 1 percent solution and says it "Will react with acids." Claims about "TSP's acidic nature" have it backwards.

Can I mix TSP with bleach for moldy grout?

The TSP box does give a mildew mix for decks and siding: 1 cup TSP in 3 quarts of warm water plus 1 quart of bleach. It gives no mix for grout. Bleach can lighten colored grout; see bleach on grout. Never add an acid to TSP.

Should I use TSP before sealing grout?

Yes, if the grout is greasy. Rinse twice and let the joints dry fully, since the sealer needs a surface that is "dry, clean" (Aqua Mix TDS-158).

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.