Polyblend vs Polyblend Plus Grout: The Data Sheets Compared
On this page
- What Polyblend and Polyblend Plus are
- Polyblend vs Polyblend Plus side by side
- What the strength and absorption numbers mean
- What else changed from Polyblend to Polyblend Plus
- Where Polyblend HP fits
- Do old Polyblend color numbers carry over to Polyblend Plus?
- A worked case: patching a Polyblend Bone floor
- Which should you buy?
- Where this answer stops applying
- Frequently asked questions
- Sources and standards
Polyblend Plus is Custom Building Products' upgrade of its original Polyblend grout. The original is a standard grout under ANSI A118.6. Plus meets the stricter high-performance standard, A118.7, with water alone. On Custom's own sheets, that halves the water absorption limit (under 5 percent, not 10) and raises the tensile and flexural limits. Shrinkage and 28-day strength limits are the same. Both fill 1/8 to 1/2 inch joints. Plus comes in 40 colors, the original in 15 (18 in Canada). For new work, buy Plus.
Key takeaways
- Original Polyblend Sanded (TDS-129, May 1, 2024) cites ANSI A118.6. Polyblend Plus Sanded (TDS-360) says it is "now an ANSI A118.7" grout and meets it "without additive."
- The printed limits: water absorption under 10% vs under 5%; tensile over 300 vs over 500 psi; flexural over 500 vs over 1,000 psi. Shrinkage under 0.20% and 28-day compressive over 3,000 psi are the same on both.
- Neither sheet prints a measured result. The "Typical Results" column on both repeats the requirement, so the gap you can prove is the gap between the two standards.
- Every one of the original's color numbers (15 US, 18 Canada) is on the Plus list of 40, under the same name. Custom also says Plus has "brighter, more vivid finished color," so the same number is not a promise of the same shade.
- To patch old Polyblend, buy Plus in the same number, make a cured sample, and judge it dry against cleaned old grout before you touch the floor.
What Polyblend and Polyblend Plus are
Both are bagged cement grouts from Custom Building Products, sold in home centers across the US and Canada. Grout is the material packed into the gaps between tiles. A cement grout is portland cement, fine fillers and pigment that harden when mixed with water. Both data sheets describe the sanded versions in the same words: "a dry, Portland cement based grout with silica sand, inorganic aggregates and chemicals."
Both are polymer-modified. That means a dry plastic binder is already in the bag, so you add water only, never a liquid additive. Polymer-modified grout explains what the polymer does. Both are sanded, with sand as the coarse filler, which is why both start at 1/8 inch joints. Sanded vs unsanded grout covers that split.
The real difference is the standard each one is tested to. An ANSI standard is a published set of lab tests with pass limits. The American National Standards Institute approves them, and grout makers print the one they meet on the bag and on the technical data sheet (TDS), the maker's own spec sheet.
- ANSI A118.6 covers standard cement grouts. It is the baseline.
- ANSI A118.7 covers high-performance cement grouts. It sets tighter limits on water absorption and strength and adds an early strength check.
So "Polyblend vs Polyblend Plus" is really "A118.6 vs A118.7 in the same brand." The site's guide to grout standards explains both, and high-performance cement grout covers the A118.7 class as a whole.
Custom launched Plus at The International Surface Event in January 2020. Its release, as printed by Floor Biz on February 6, 2020, called it "brighter, enhanced color" and "more efflorescence resistant than its predecessor." The original's sheet on Custom's site is now titled "Private: Polyblend Sanded Grout." Custom's site runs on WordPress, where that prefix marks a page that has been hidden from public view. Custom has published no notice that the original is discontinued, so this page does not say it is.
Polyblend vs Polyblend Plus side by side
Every row below comes from the two sanded data sheets. TDS-129 is the original, published May 1, 2024. TDS-360 is Plus. Its pages print "Published Date: 3/22/2023," and Custom posted this copy on August 14, 2026, as its file name shows.
| Item | Polyblend Sanded | Polyblend Plus Sanded |
|---|---|---|
| Standards cited | ANSI A108.10, A118.6 | ANSI A108.10, A118.6 and A118.7; "exceeds ANSI A118.6 & A118.7" |
| Water absorption limit | Under 10% | Under 5% |
| Tensile strength limit | Over 300 psi | Over 500 psi (28 days) |
| Flexural strength limit | Over 500 psi | Over 1,000 psi (28 days) |
| 1-day compressive strength | Not listed | Over 500 psi |
| 28-day compressive strength | Over 3,000 psi | Over 3,000 psi |
| Shrinkage limit | Under 0.20% | Under 0.20% (28 days) |
| Joint width | 1/8 to 1/2 inch | 1/8 to 1/2 inch |
| Colors | 15 standard in the US, 18 in Canada | 40 in the 25 lb bag; 15 in the 7 lb box |
| Sizes | 25 lb bag, 7 lb box, 1 lb tub (4 colors); 50 lb bag by special order | 25 lb bag, 7 lb box |
| Water per 25 lb bag | 2 qt | 2 to 2.5 qt |
| Slake (rest) after mixing | 10 minutes | 5 minutes |
| Pot life | 1 to 2 hours | 1 to 2 hours |
| Install temperature | 50 to 100 deg F | 50 to 100 deg F |
| Foot traffic | Not stated | Not before 16 hours |
| Pools and fountains | Listed | Listed; not fully submerged for 14 days |
The rows that match matter as much as the rows that differ. The joint range, pot life, temperature range and haze schedule are the same. Both sheets say to wipe haze after 3 hours, wash with Aqua Mix NanoScrub after 3 days, and use an acid haze remover only after 10 days. Mixing and cleanup will feel familiar if you have used the original.
What the strength and absorption numbers mean
Each sheet has a "Technical Chart" with two columns: "Requirement" and "Typical Results." The requirement is the limit in the standard. Typical results should be what the product actually scored. On both Polyblend sheets, the two columns say the same thing. The original's absorption reads "< 10%" and "<10%." Plus's flexural strength reads "> 1000psi" in both. So neither sheet tells you how far past the limit the grout lands.
Not every maker does this. LATICRETE's sheet for PERMACOLOR Grout (DS-250-1026), another A118.7 grout, prints measured values: 3.25 percent water absorption, 4,750 psi compressive and 1,400 psi flexural at 28 days. That shows what a typical results column can hold. It is not a figure for Polyblend Plus, and this page does not treat it as one.
So the difference you can prove is the difference between the two sets of limits. Here is what each one means for a floor.
- Water absorption is how much water cured grout soaks up, as a share of its weight. A limit of 5 percent instead of 10 means less water, soap and dirt get into the joint. That is the change most owners notice, as grout that stains less.
- Tensile strength is resistance to being pulled apart. The limit rises from 300 to 500 psi, or two thirds higher.
- Flexural strength is resistance to bending before it cracks. The limit doubles, from 500 to 1,000 psi.
- Compressive strength is resistance to being crushed, as under foot traffic. Both limits are 3,000 psi at 28 days. Plus adds a 500 psi check at one day, which is about early hardening.
- Shrinkage is how much the grout pulls in as it cures. Both sheets give the same limit, under 0.20 percent. On paper, Plus is not more crack resistant from shrinkage.
"Without additive" is the other half of the claim. Some cement grouts reach A118.7 only with a liquid additive. Bostik's Hydroment sanded grout sheet, for one, says it exceeds A118.6 "when mixed with water" and A118.7 when mixed with Bostik's 425 admix. Plus says it meets A118.7 "without additive," with water alone. Mix it with clean water only, as both sheets say.
What else changed from Polyblend to Polyblend Plus
Four claims on the Plus sheet have no numbers behind them. The list reads: "Brighter, more vivid finished color," "Enhanced color consistency," "Better resistance to efflorescence," and the A118.7 line. Here is what each one covers.
Efflorescence is the white, powdery bloom that can form on cement grout. Water carries salts out of the cement, and they dry on the face of the joint. Custom says Plus resists it better but gives no test or figure. Efflorescence on grout covers why it forms and how to clean it.
Color consistency means the color comes out even from joint to joint and bag to bag. Water is the main enemy. Both sheets warn that adding water while mixing can "cause color variation," and both say to use "as little water as possible for cleanup." Why grout color varies explains the causes.
The working details shifted a little. Plus takes 2 to 2.5 quarts of water per 25 lb bag. The original takes exactly 2. Plus slakes 5 minutes, the original 10. How much water per bag of grout compares these with other brands. Both warn not to add water as the mix stiffens: remix and use it within 1 to 2 hours. How long mixed grout is good covers that window.
The sizes changed as well. The original's sheet lists a 1 lb tub in four colors and a 50 lb bag by special order. The Plus sheet lists only the 25 lb bag and the 7 lb box. For a small repair, the 7 lb box is the smallest Plus size.
The cure directions differ too. The Plus sheet adds two waits the original never states: no foot traffic for 16 hours, and no full submersion for 14 days. The original adds a step Plus drops. Outdoors, it says to mist the grout with clean, cool water for 3 days. Both want 72 hours above 50 deg F, and outdoor work kept dry for 7 days. More in grout cure time.
Sealing is optional on both. Each sheet says "If the use of a sealer is desired," then names a penetrating sealer. The original's care section adds a line worth keeping for both: "Do not use acidic cleaners on Polyblend Grouts as long term damage may occur."
Where Polyblend HP fits
A third name joined the family in 2026. On August 14, 2026, the same day it posted the Plus sheet, Custom published a sheet for Polyblend HP High Performance Fine Aggregate Grout. It carries the same number, TDS-360, and calls itself "a new high-performance cement grout."
HP prints the same A118.7 limits as Plus, the same 2 to 2.5 quarts per 25 lb bag, the same 5-minute slake and the same 16-hour wait for foot traffic. It also comes in 40 colors in the 25 lb bag. The difference is the sand. HP uses a fine aggregate, a finer sand, and is rated for "all joint widths up to 3/4"." Its coverage chart starts at 1/16 inch. Custom says it "eliminates the need for non-sanded grout for most installations."
So if your joints are 1/8 to 1/2 inch, Plus and HP print the same limits. If they are narrower or wider, HP covers them in one bag. Neither sheet says HP replaces Plus.
Do old Polyblend color numbers carry over to Polyblend Plus?
The number does. The exact shade is not promised. Read side by side, every color on the original's sheet appears on the Plus list under the same number and name.
- The 15 US colors of original Polyblend: #9 Natural Gray, #11 Snow White, #19 Pewter, #60 Charcoal, #115 Platinum, #122 Linen, #165 Delorean Gray, #380 Haystack, #381 Bright White, #382 Bone, #386 Oyster Gray, #544 Rolling Fog, #640 Arctic White, #646 Coffee Bean and #647 Brown Velvet. All 15 are among the 40 colors of Plus.
- The 18 Canadian colors add #10 Antique White, #52 Tobacco Brown, #105 Earth, #145 Light Smoke, #185 New Taupe, #335 Winter Gray and #540 Truffle, and leave out four of the US colors. All 18 are on the Plus list too.
- The Plus 7 lb box comes in exactly the original's 15 US color numbers. The other 25 Plus colors come only in the 25 lb bag.
- The Plus sheet prints Natural Gray as "#09." It is the same color number as "#9."
The shade is a separate question. Custom's own feature list says Plus has "brighter, more vivid finished color." That is a statement that Plus does not look the same as the original. No Custom document found says that a Plus color cures to the same shade as the original color with the same number. The Plus sheet also says "A CUSTOM grout color card is truest representation of the grout formula," and it says to make a mockup.
So the ruling for patching is this. Buy Plus in the same color number as the old grout, because that is the closest match Custom sells. Then make a cured sample before you fill a single joint. New grout next to old grout rarely matches anyway, from dirt, sealer and wear, as matching existing grout color explains. A formula that Custom calls brighter adds one more reason.
A worked case: patching a Polyblend Bone floor
Take a bathroom floor grouted some years ago with original Polyblend Sanded, color #382 Bone. A leftover bag label in the garage names it. The joints are 3/16 inch. A few joints near the tub have cracked and need cutting out and refilling. The store now stocks Polyblend Plus.
Start with the number. #382 Bone is on both color lists, so the bag to buy is Polyblend Plus Sanded #382 Bone. The 7 lb box is plenty for a repair. On the Plus sheet it comes in 15 colors, the same 15 numbers as the original's US list, and Bone is one of them. The joint is 3/16 inch, inside the 1/8 to 1/2 inch range of both sheets, so sanded is right.
Next, the reference. Clean a few inches of the old grout well and let it dry overnight. Old grout is often lighter than it looks under years of dirt. That cleaned patch, not the dirty floor, is what the new grout has to match.
Then the sample. Mix a little Plus with clean water at the sheet's ratio. That is 1 to 1.25 pints of water for a full 7 lb box, so use less for a small batch. Press it into a joint on a scrap of the same tile, or on a piece of board. Let it cure and dry fully, since wet grout reads darker. Hold it beside the cleaned old grout in the room's own light.
Now decide. If the sample is close, fill the repaired joints with the same mix, use as little sponge water as you can, and keep traffic off for 16 hours, per the Plus sheet. If the sample is clearly brighter, as Custom's own wording warns it may be, a patch will show. The fixes are a grout colorant over old and new grout together, or regrouting the whole floor field. Spot grout repair walks through the cut-out and refill.
Change one fact and the answer shifts. If the old grout was a color the original sheet does not list, it was likely a color-matched or older shade, and only a sample will tell. If the old grout was sealed or recolored, match against that surface, not the bag color.
Which should you buy?
New tile: Polyblend Plus. It meets the higher standard with water alone, it fills the same joints, it mixes and cleans up the same way, and it comes in more than twice as many colors. Nothing on the original's sheet does a job that the Plus sheet rules out.
Patching old Polyblend: Plus in the same color number, after a cured sample. If you find original Polyblend in the same color and the sample matches better, use it. That is a judgment the sample makes, not the label.
Wet areas, floors and pools: both sheets list showers, countertops, high-traffic floors and submerged pools and fountains. Plus has the lower absorption limit and the stated 14-day wait before a pool is filled. See pool grout for what else a pool asks of grout.
Polished stone, glass or soft glazes: neither is a free pass. Both sheets warn that some ceramic, glass, metal, marble or stone tiles "can be scratched or damaged by the silica aggregate filler." Both name the non-sanded version for joints up to 1/8 inch or for tile that sanded grout would harm. Test on a spare tile.
For how Plus sits beside Prism, PERMACOLOR Select, Power Grout and the others, see grout product lines compared. Custom's premixed grout went through its own change, covered in Fusion Pro vs Prism SCG.
Bottom line: Polyblend Plus is the same kind of sanded cement grout as Polyblend, moved up from ANSI A118.6 to A118.7 with water alone. On Custom's sheets, that means a 5 percent absorption limit instead of 10, and tensile and flexural limits two thirds higher and twice as high. Joint range, pot life and cleanup are the same. Buy Plus. To patch old Polyblend, use Plus in the same color number and trust a cured sample, not the number.
Where this answer stops applying
This page compares the two sanded data sheets only: TDS-129 dated May 1, 2024 and TDS-360 as posted on August 14, 2026. The non-sanded versions have their own sheets, which were not read here, so their joint limits and colors are not covered. Polyblend HP is described only as far as its own sheet compares with Plus. The strength and absorption figures are the limits printed in the requirement columns, not test results for these products, because Custom prints none. Custom's claims about color, consistency and efflorescence have no figure behind them on either sheet, so this page gives none. Color lists differ by country and change over time, so check the current color card where you buy. A118.7 does not make grout waterproof or stain-proof: a shower still needs a membrane behind the tile, and stains still need wiping. The guidance on acid cleaners, the 10-day wait before an acid haze remover, and the 50 to 100 deg F install range applies to both grouts. This page does not compare prices.
Frequently asked questions
What is the difference between Polyblend and Polyblend Plus?
The standard. Original Polyblend meets ANSI A118.6, the standard-grout spec. Polyblend Plus meets ANSI A118.7, the high-performance spec, with water only. Custom also says Plus has brighter color, better color consistency and better resistance to efflorescence, and it comes in 40 colors instead of 15.
Is Polyblend Plus stronger than Polyblend?
Its required limits are higher: tensile over 500 psi instead of 300, flexural over 1,000 psi instead of 500. The 28-day compressive limit is 3,000 psi on both. Neither sheet prints a measured result, so those are floors, not test scores.
Is Polyblend discontinued?
Custom has published no discontinuation notice that we found. Its data sheet for the original is now titled "Private: Polyblend Sanded Grout," which on Custom's WordPress site marks a page hidden from public view. Plus is the version Custom promotes.
Can I use Polyblend Plus to repair old Polyblend grout?
Yes. Every original color number is on the Plus list. But Custom calls the Plus color brighter, so make a cured sample and compare it dry with cleaned old grout first.
Do I need to seal Polyblend Plus?
The sheet makes it optional: "If the use of a sealer is desired for extra protection, apply a penetrating sealer." Its lower absorption limit helps, but cement grout still takes up water. See how to seal grout.
Can I add latex additive to Polyblend Plus?
The sheet says to mix it with clean water and says it meets A118.7 "without additive." It names no additive, so mix with water only.
What is Polyblend HP?
A fine-aggregate A118.7 grout Custom published on August 14, 2026, under the same TDS-360 number. It prints the same limits as Polyblend Plus but covers joints up to 3/4 inch, and its coverage chart starts at 1/16 inch.
What joint width is Polyblend Plus sanded for?
1/8 to 1/2 inch, the same as the original. For joints up to 1/8 inch, the sheet points to Polyblend Plus NonSanded Grout.
Sources and standards
- Custom Building Products, Private: Polyblend Sanded Grout, TDS-129 (published May 1, 2024): standards, technical chart, colors, sizes, mixing, curing, care
- Custom Building Products, Polyblend Plus Sanded Grout, TDS-360 (pages dated March 22, 2023; file posted August 14, 2026): key features, technical chart, 40-color list, mixing, curing, sealing
- Custom Building Products, Polyblend HP High Performance Fine Aggregate Grout, TDS-360 (August 14, 2026)
- Floor Biz, CUSTOM Introduces New Grout Colors and Polyblend Plus (February 6, 2020)
- Concrete Decor, Polyblend Plus by Custom Building Products (product release, 2020)
- LATICRETE, PERMACOLOR Grout, DS-250-1026: measured results for an A118.7 grout
- Bostik, Hydroment Ceramic Tile Grout, Sanded, product data: A118.6 with water, A118.7 with 425 admix
- ANSI A118.6, Standard Cement Grouts for Tile Installation, and ANSI A118.7, High Performance Cement Grouts for Tile Installation, as cited in the requirement columns of the two Custom data sheets
- ANSI A108.10, Installation of Grout in Tilework
Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.