Can You Grout Over Tile Spacers? Which Stay

InstallationUpdated 11 min readHow we research

On this page
  1. Why some people say yes
  2. What the grout data sheets say
  3. What can stay and what comes out, by spacer type
  4. The depth math for leave-in spacers
  5. Leveling clips: the base stays, everything above it goes
  6. When to pull ordinary spacers
  7. Already grouted over spacers?
  8. Where this answer stops applying
  9. Frequently asked questions
  10. Sources and standards

No, not with ordinary plastic spacers. Every grout data sheet checked for this page says to remove spacers before grouting, and leaving solid spacers in the joint is a practice the trade tried and abandoned because the grout over them discolored and cracked. The exceptions are spacers sold specifically as leave-in, set flat and well below the grout surface, and the bases of leveling clips, which are designed to stay under the tile.

Key takeaways

  • Custom, LATICRETE and MAPEI grout sheets all say it in plain words: "Remove spacers", "remove spacers and debris in grout joints", "Remove all tile spacers." None makes an exception for leave-in types.
  • Grouting over solid spacers was tried and dropped. A 2004 US patent for a hollow spacer records that solid spacers left in joints made the grout appear discolored and caused the grout above them "to crack and break away."
  • Leave-in spacers exist: QEP sells hard-style spacers that "do not have to be removed before grouting" when set by its inset method. They still occupy depth. A flat spacer about 1/8 inch thick in 1/4 inch wall tile leaves only half the joint for grout.
  • Leveling clips are different. The base stays under the tile by design, and the top snaps off below the tile face. Wedges, caps and straps all come out.
  • Already grouted over spacers? Cracks or dark spots at joint intersections are the tell. Cut out the grout at that intersection, pull the spacer, and regrout the spot.

Why some people say yes

Tile setters say "never grout over spacers," yet the spacer aisle sells packages labeled "Leave-in or Traditional." Both are real; the difference is the spacer.

The history explains the rule. US patent 6,823,640, granted in 2004 to Walter Pytlewski for a hollow tile spacer, opens with a summary of what came before. Setters first used cord laid between the tiles and pulled it out once the mortar cured. Then came small solid rubber or plastic crosses, and because they were thinner than the tile, they "were initially left in the joint and grouted over." The patent says that practice "was quickly abandoned" when some spacers made the grout "appear discolored" and, being resilient, caused "the overlying and surrounding grout to crack and break away." Its conclusion: "Experience led to the firm conclusion that solid rubber or plastic cannot be left in the grout joint."

The patent's own answer was a hollow spacer whose thin-walled limbs fill with grout, so the spacer is locked inside the joint instead of sitting under a thin skin. It was later assigned to Marshalltown, and hard-style leave-in spacers are sold today by QEP.

So the "yes" answer is true for a narrow class of products used a specific way. The "no" answer is true for the ordinary crosses, tees and wedges in most toolboxes, and it is the answer every grout maker gives. When the two conflict, the grout sheet decides, because it is the grout that fails.

What the grout data sheets say

Grout makers write joint preparation into their instructions. These are the current sheets fetched for this page, covering a high-performance cement grout, two LATICRETE cement grouts and a MAPEI premixed grout.

Spacer and joint preparation instructions in four grout data sheets
Grout (sheet)Spacer instructionJoint condition required
Custom Polyblend HP High Performance Fine Aggregate Grout (TDS-360, Aug 2026)"Remove spacers"Joints "uniform in depth and width and free of loose debris, contaminants and excess mortar"
LATICRETE PERMACOLOR Grout (DS-250-0926)"remove spacers and debris in grout joints"Dust and dirt removed with a wet sponge; no standing water in joints
LATICRETE PERMACOLOR Select NS Grout Base (DS-116-0926)"remove spacers and debris in grout joints"Same wording; substrate between 40°F and 90°F
MAPEI Premixed Premium Grout (Oct 2017 edition)"Remove all tile spacers."Excess mortar removed "so that 2/3 of the tile depth is left available for grouting"

Note two things. The sheets do not carve out leave-in spacers, so a spacer maker's leave-in claim does not come with the grout maker's agreement. And MAPEI states the depth rule directly: two-thirds of the tile depth must be open for grout. A spacer lying in the joint takes up depth exactly the way hardened thinset does, and the grout joint depth guide explains why a shallow joint is a weak one.

What can stay and what comes out, by spacer type

Spacers and leveling parts: remove or leave before grouting
What is in the jointBefore groutingWhy
Ordinary solid cross or tee spacer, standing on edgeRemoveSticks up above the tile; it is designed to be pulled and reused
Ordinary solid cross or tee spacer, pushed flat into the jointRemoveThe case the patent history describes: discoloring and cracking over the spacer. Every grout sheet above says remove
Rubber or soft compressible spacerRemoveResilient spacers flex under the grout, the cracking mechanism the patent names
Wedge spacers and shims in the jointRemoveNot made to stay; the grout sheets above say remove spacers
Cord or rope used as a spacerRemoveThe patent's history: the cord was removed once the mortar cured, then the joint was grouted
Hard leave-in spacer (QEP hard-style), set flat by the inset methodMay stay, if the depth math works (below)QEP: "they do not have to be removed before grouting"; low profile "so they can easily be covered when grouting"
Hollow leave-in spacer (patent 6,823,640 design)May stay, set below the future grout surfaceGrout fills the hollow limbs and "permanently seals and immobilizes" it
Leveling clip base under the tileStaysDesigned to remain; the top breaks off below the tile face
Leveling wedges, caps and strapsRemoveRemoved once the mortar has cured, before grouting

The depth math for leave-in spacers

A leave-in spacer only works if the grout above it is still thick enough to hold. QEP lists the item height of its 1/8 inch and 1/4 inch hard-style spacers as 0.13 and 0.12 inch, so a flat spacer is roughly 1/8 inch thick whatever joint width it makes. Set that against MAPEI's two-thirds rule and the tile's thickness decides the answer.

Grout left above a flat 1/8 inch thick spacer, against the two-thirds depth rule
Tile thicknessTwo-thirds of tile depthGrout above a flat spacerMeets the rule?
1/4 in (typical wall tile)About 0.17 inAbout 0.13 in (half the depth)No
5/16 inAbout 0.21 inAbout 0.19 inNo, just short
3/8 in (common porcelain floor tile)0.25 inAbout 0.25 inOnly with the spacer fully down
7/16 inAbout 0.29 inAbout 0.31 inYes
3/4 in (stone, pavers)0.50 inAbout 0.63 inYes

The table assumes the spacer sits at the very bottom of the joint, level with the back of the tile. In practice it often rests on thinset squeezed up into the joint, which lifts it and thins the grout further. That is why the patent tells the setter to position hollow spacers "below what will be the level of the surface of the grout in the filled joint", and why a leave-in spacer belongs in thick floor tile and stone, not in thin wall tile. QEP pitches its leave-in spacers for marble, granite, porcelain and large format tile, which fits the arithmetic.

Leveling clips: the base stays, everything above it goes

Leveling systems are the one case where plastic is meant to stay in the joint. The base sits under the edges of neighboring tiles, the mortar locks it there, and the upright part is broken off once the mortar has cured. QEP says its LASH clips are "designed to break off below the surface of the tile". Raimondi's RLS instructions say to knock the cap off with a rubber mallet or a foot, striking parallel to the joint line. The wedges and caps come out; the stub that remains sits below the tile face and gets grouted over.

Two details from the instructions affect the grout joint:

  • Wait for the mortar before breaking the clips. MAPEI's gauged porcelain guide, using the MLT and Tuscan systems as its example, says the strap and cap can come off after at least 24 hours with a traditional mortar and at least 3 to 4 hours with a rapid-setting one. Snapping early can move tile that is still in soft mortar. The full schedule by setting material is in when to grout after tiling.
  • Do not let the strap set the joint width. The same guide says joint width "should not be based on the edge-leveling device's strap" and that spacers used in addition to the strap "will allow for easier cleaning of the grout joint." In other words, many leveling jobs have ordinary spacers in them too, and those still come out. QEP likewise says its 1/16 inch LASH clips can be combined with regular spacers for joints up to 1/4 inch.

After breaking the clips, run a fingertip along each joint. A clip that snapped high leaves a sliver at or near the surface, and grout over it is thin enough to show as a pale or cracked line. Trim it down with a utility knife or a carbide scraper before you grout. If your joints wander after the clips come out, see uneven grout lines; and do not let a clip system tempt you below the minimum grout joint width of 1/16 inch that MAPEI's guide also calls for.

When to pull ordinary spacers

Earlier than most people think, while the mortar is still soft enough to let go of them.

  • Durostick's spacer data sheet says that with its own adhesive, spacers can be removed from walls 3 hours after the work is finished and from floors after 2 hours, and that the spacers are reusable "when removed in time."
  • Rubi's guidance puts the window at around 20 to 30 minutes after the adhesive begins to set.
  • Leveling straps and caps wait longer: 24 hours over traditional mortar, 3 to 4 hours over rapid-set, in the MAPEI guide above.

Those times depend on the adhesive and temperature. The common thread: spacers come out the same day, while you rake excess thinset from the joints. One stuck in hard mortar comes out straight up with needle-nose pliers, as Rubi describes; levering it sideways chips tile edges. Then vacuum the joints before mixing, as in the prep section of how to grout tile.

Already grouted over spacers?

Usually it is a spacer pushed flat and forgotten. The fix depends on how long ago.

  • Same session, grout still soft. Dig out the intersection with a margin trowel tip, flick the spacer out, and refill before you sponge.
  • Grout has set, joints look fine. Nothing in the sources gives a reliable rate at which a covered spacer fails. Watch the intersections over the first weeks of use, especially on floors.
  • Cracks, a crosshair pattern or a dark or light patch at intersections. That is the failure the patent describes. Cut out the grout around the spacer with a grout saw or oscillating tool, as in how to remove grout, pull the spacer, vacuum, and regrout. The spot grout repair guide covers the fill, and matching existing grout color covers the hard part of a patch.

If cracks show up along whole joint lines, not just at intersections, spacers are not the cause. Start with why grout cracks, which reads crack patterns. A shadow at intersections with no crack can also be thinset or uneven drying; grout discoloration and shading separates the causes.

Where this answer stops applying

  • Movement joints. A joint that will get sealant instead of grout must be empty to depth for the sealant and backer rod. Nothing stays in it. See caulk vs grout for movement joints.
  • Outdoors. QEP's product listings give these hard-style spacers as indoor products. Outdoor tile is not a place to test a leave-in spacer.
  • Thin tile. Wall tile, mosaics and gauged porcelain under about 3/8 inch do not leave enough depth above a flat spacer, per the table above.
  • Grout warranties. The grout sheets checked here say remove spacers. If a system warranty matters on your job, follow the grout sheet, not the spacer bag.
  • Other grout types. The sheets reviewed here are cement and premixed grouts. For epoxy, urethane or any other product, read its own preparation section; the spacer rule there was not checked for this page.

Bottom line: Pull ordinary spacers, every one, the same day you set the tile. Leave-in spacers are a real product, but they belong flat and fully buried in tile at least 3/8 inch thick, and the grout makers still say remove spacers. Leveling clip bases stay; their tops, wedges and caps go. Then rake, vacuum and grout. For the rest of the prep, see common grouting mistakes.

Frequently asked questions

Do you remove tile spacers before grouting?

Yes, for ordinary spacers. Custom, LATICRETE and MAPEI grout data sheets all tell you to remove them. The only exceptions are spacers made and sold as leave-in, and the buried bases of leveling clips.

What happens if you grout over tile spacers?

The grout above a solid spacer is thin, and the spacer can flex under it. The result reported in the hollow spacer patent is discolored grout and grout that cracks and breaks away over the spacer, usually as a mark at the joint intersection.

Can you grout over leveling clips?

Over the base, yes: it is designed to stay under the tile and the top breaks off below the tile face. Remove all wedges, caps and straps, and trim any clip that snapped too high.

How deep should a leave-in spacer sit?

Low enough that grout fills at least two-thirds of the tile depth above it. A flat spacer is about 1/8 inch thick, so that works in tile 3/8 inch and thicker only if the spacer sits fully down.

How long do you leave spacers in before removing them?

Until the tile will not slide, usually hours, not days. Durostick gives 2 hours on floors and 3 on walls with its adhesive; leveling straps wait 24 hours over traditional mortar. Pull them before the mortar hardens around them.

Sources and standards

Grout Atlas guidance is checked against ANSI A108/A118 and ISO 13007 requirements, the TCNA Handbook and manufacturer technical data sheets. Product formulations change, so confirm details on the current data sheet for the product you buy. Spotted an error? Report a correction.